Badass Pilot Bore Sprockets: Gear Up for Serious Power!

uxcell 6mm to 1/4 Inch Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,2pcs

• Connection Bore Diameter: 6mm to 1/4 inch.
• Total Length: 25mm/0.98 inch, Outside Diameter : 18mm/0.7 inch.
• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
• high torque with rigidity, low inertia and excellent sensitivity..
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue w Wrench

• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
• high torque with rigidity, low inertia and excellent sensitivity..
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Snappy Tools Quick-Change 5-Pc. Countersink Drill Bit Set. Proudly Made in the USA.

• In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws..
• Snappy Tools Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface.
• Ideal for plugs or dowel buttons. The 1/4" hex shank can be used with power drills and quick-change chucks..
• Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price..
• Includes 5 Gold Screw Countersinks: 5/64x3/8, 3/32x3/8, 7/64x3/8, 1/8x3/8 & 9/64x1/2.

Tegara CAT40 1 x 1.97\ Shell Face Mill Tool Holder 202-5372 M}

• Made from alloy steel harden to 54-60 HRc.
• All critical surface are precision ground.

Nexen 805272 L-600 Shaft Mounted Clutch

• Bore Size: 1.125 in. or 0 - 1.0 With Bushings.
• High Coefficient Clutch Facing Type and Open Design.

Mikuni Round Slide VM Series Carburetor - 38mm VM38-9

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,2pcs

• Connection Bore Diameter: 1/4 inch to 1/4 inch.
• Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
• high torque with rigidity, low inertia and excellent sensitivity..
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs

• Connection Bore Diameter: 1/4 inch to 1/4 inch.
• Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
• high torque with rigidity, low inertia and excellent sensitivity..
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

• ...n ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
• 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
• Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
• With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessible maintains, and safer use..
• Various Application: Our hydraulic top link cat cylinder is the ideal tool for various mobile equipment types in industries like wastes, recycling, constructions, transportations, agriculture, material handling, etc. It works excell....

Genuine Real Mikuni 22mm Round Slide Bolt On Flange Carburetor Carb VM22-133 by Niche Cycle Supply

• Round Slide VM Series Carburetor by Mikuni.
• Spigot O.D. Mounting: 49mm CTR (Flange Mount).

TFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit

• The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
• Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
• Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
• 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).

Mycheng 6Pcs Carburetor Adjustment Tool Kit with Case Including 21 Teeth Splined/7 Teeth Splined/Hexagon/ Double D/Small Head Single D/Single D for 2 Cycle Carburetor Engine

• Adjustable tool is designed to both hold and turn cam sprockets.
• The tool is needed to turn the cam sprockets to adjust the cam position.
• Can also be used to hold the cam sprocket in place when removing the cam bolt.
• Will work on all single and dual overhead cam sprockets with holes.

Qualtech 1-3/4\ 4MT HSS Undersized Shank Taper Shank Drill Bit, DWDTS1-3/4-4MT

• Pilot point twist drill bit, high speed steel material..
• High performance twist drill bit with morse taper shank for high precise drilling of larger bore diameter..
• Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
• Self-centering point, do not need assistant center drilling or center punching..
• For general using drilling in wood, aluminum, malleable iron, plastic etc..

2006 2007 2008 Kawasaki Ninja 650 650R EX650 Front Sprocket 16 Tooth

• Race-Driven sprockets are manufactured to exceed OEM specifications.
• Race-driven sprockets are produced using hardened S45C steel.
• Fits 2006 2007 2008 Kawasaki Ninja 650R EX650.