Reviews Hole Saw Cutter Set

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

3 Pieces Reciprocating Saw Blades Wood Pruning Saw Cutter Includes 6 /6TPI 9 /6TPI 9.5 /5TPI Saw Cut HCS High Carbon Steel Reciprocating Saw Set for Cutting Wood Plastic

  • The package contains: HCS high-carbon steel reciprocating saw set contains 3 sizes of saw cutter, including 6"/6TPI saw cutter, 9"/6TPI saw cutter,....
  • Material: this saw cut set is a high carbon steel saw cutter with high strength and hardness, high elastic limit and fatigue limit, and strong cutting....
  • S644D model saw: 6"/6TPI (150 mm/ 4 mm), suitable for cutting construction wood (6 - 100 mm), wood board (.
  • S1111DF model saw: 9"/6TPI (225 mm/ 4 mm), suitable for cutting wood with metal or nails, wood chipboard (10 - 100 mm), plastic profile (φ5-175 mm),....
  • S1531L model saw: 9.5"/5TPI (240 mm/ 5 mm), suitable for fast cutting rough wood, garden wood (φ15-150 mm).
Check Stock

MUKCHAP 110 mm Hole Saw SDS Plus Shank Hole Saw, Hole Saw Drill Bit for Wall, Concrete, Brick, Cement

  • QUALITY MATERIAL - The shank masonry hole saw cutter is made of hard alloy steel, which has high hardness and is not easy to deform. The hole saw is stable and powerful, and the work efficiency of the drilling operation is improved..
  • EASY TO USE - The shank on the connecting rod works with SDS Plus tools. The hole saw kit is easy to use, simple to operate, and the drilling speed is very fast. During use, the chips can be cleanly removed to achieve continuous and efficient operation..
  • APPLICABLE SIZE - The hole saw diameter is 110 mm (4.3 inches). The bit shank will fit in a 3/8 inch drill. The 110 mm hole saw has been adopted fine craftsmanship and strict design, so the welding interface is very firm and precise. You can get a neatly cut round hole..
  • WIDE RANGE OF APPLICATIONS - This masonry hole saw kit drills through most common wall materials, such as brick, adobe, concrete, and cement. Suitable for drilling walls, hollow brick to operate air conditioning holes, pipe holes and so on..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our 110 mm concrete hole saw within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedi....
Check Stock

8Pcs Concrete Hole Saw Kits, 40mm 65mm 80mm 100mm 125mm 5pcs SDS Plus Shank Masonry Hole Saw Cutters, 110mm Connecting Rod, 2 Center Drill Bits for Cement Brick Wall

  • This Concrete Hole Saw Kit has 8 pieces included. 5 pieces hole saw cutters: 40mm, 65mm, 80mm, 100mm, 125mm. One piece connecting rod 110mm, and 2 pieces drill bits..
  • The wall hole saw cutter kit are made of high quality alloy metal for long time use..
  • This Cement Hole Saw Drill Bit is Very easy to use with fast speed..
  • These Hole Saw Cutters are Mainly used in drilling walls, stones, bricks or installing air conditioners, range hoods, pipeline opening, etc..
Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • 【Meric TCT hole saw set includes】 :10 pcs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is....
Check Stock

7 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutters Set Heavy Duty for Stainless Steel Hard Metal Wood Plastic, Dia Size 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 2”, with Extra Pilot Drill Bits

  • ...g Holes in 7 Different Sizes: Package includes 7 Hole Saws in most popular sizes - 3/4” (19mm), 7/8” (22mm), 1” (25mm), 1-1/8” (29mm), 1-1/4” (32mm), 1-3/8” (35mm), and 2” (50mm), cutting perfect holes for conduit and pipes.
  • TCT Hole Saw Kits for Hard Materials: This Set of Tungsten Carbide-Tipped Hole Cutters can cut precise holes in a lot of materials, such as stainless steel, mild steel, copper, iron, FRP, aluminum, wood and plastic with thickness up to 1/5” (5 mm).
  • Double Pilot Drill Bits for More Holes: Each hole saw kit includes 1 Hole Saw, 1 Hex wrench and 2 Pilot Drill Bits.
  • Starting with lower torque and lower speed, using cutting oil as lubricant will ensure clean holes and also prevent bit from getting burnt or broken.
  • Designed for Tough Jobs: All the Hole Cutters built with carbide tipped teeth and 3/8” 3-Flatted Shank, allowing a strong and steady chuck grip for heavy duty hole cutting applications.
  • compatible with drills, impact drills and CNC drilling machines.
  • Well Organized and Rust-Resistant: Each hole cutter kit is oiled and packed in a Semi-Transparent plastic carrying case for rust-resistant & well-organized storage and easy access.
  • Please feel free to contact us if you have any problem in using the Hole Cutters.
Check Stock