Reviews0 10v Signal Control

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

Czepa 9V Charger Compatible with Black and Decker Screwdriver LI2000 LI3100 Cordless Drill Replacement Original Part Number 90593303 & 90593303-01

  • SPECIFICATION: AC Input: 100-240V 50-60Hz, DC Output: 9V-10V 100MA(0.1A).
  • COMPATIBILITY: Replacement Black & Decker LI2000 Cordless Screwdriver Laminate Trimmer Charger part number 90593303 and 90593303-01. Fit Models: LI2000 Type 1 LI3100 Type 1 LI3100 Type 2 LI3100 Type 3 BDCS20C Type 1 BDCS40G Type 1 GSL35 Type 1 and CA Model.NOTE: 10V Charger Compatible with Black Decker ONLY for Cordless Drill ,⚠️⚠️NOT Compatible Dustbuster Handheld Vacuum.
  • INCOMPATIBILITY:Pay Special Attention. The Charger is Not Compatible With Vacuum Cleaners! !.
  • BRAND NEW CONDITION: Charges for Black and Decker 10V Cordless Drill.
  • RELIABILITY: Our Products Will Charge Your Device as Efficiently As the Original Charger, or Any Other Replacement.
Check Stock

BiXPower 12V to 24V Fan-Less Converter Compatible with ResMed AirSense 10 Series CPAP Machines - DM90S10

  • This BiXPower DC power adapter can convert 12V DC (Range 10V ~ 30V) power to 24V DC power with special configuration cable and a special connector that is compatible with ResMed Airsense 10 devices. This DC Converter works for AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed..
  • Features: Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm).
  • Acceptable Input Voltage: 10V ~ 30V DC -Output Voltage: 24V.
  • Maximum Output Power: 90W. -USB output: 5V , 2.4A.
  • Package Contents: 12V to 24V Power Converter x1.
  • Special Output Cable for ResMed S10 series x1.
Check Stock

Massive Audio EX44 - Car Audio 800 Watt, 200w x 4 RMS, Nano Edge Series, 4 Channel Car Amplifier, Bass Boost

  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. Input Level 0.4V - 10V Hi Inputs or Low Inputs..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCTS THAT WILL LAST LONGER | With 5-Way Advanced Protection and custom high-grade components your investment will last! With our extra features like Built-in Noise Reduction Circuitry, Auto Sensing Turn On Function, 12V Remote Output for External Devices (Hi-Level Inputs), and 4 Layers PCB design with SMD parts ensure you get your money's worth!.
  • MASSIVE AUDIO QUALITY GUARANTEED. Since 1999, Massive Audio has been an industry leader....
Check Stock

Wireless Dog Fence System, Electric Dog Fence, Dog Training Collar with Remote 1.15 Mile, 3 Safe Training Modes, Security Lock, Flashlight, IPX7 Waterproof Shock Collar for All Breeds, Sizes

  • 【Electronic Fence Function】Detect the dog's location at any time to prevent the dog from getting lost. Turn on the function, signal range: 0 (mini) - 99 (max), signal decrease means the dog is gradually walking away, when your dog exceeds the remote control radius 492FT/164 Yards(Double Circle) and 984FT/328 Yards(Single Circle) range, The remote control will notify you with warning sounds..
  • 【Professional Dog Shock Collar】3 Intimate Training Modes (beep, 0-9 vibration, 0-30 shock mode). Dog shock collar can effectively and scientifically assist you in training your dog. The remote's flashlight (can be turned on when off) help you find your dog quickly in dark environments..
  • 【Up to 1.15 Mile Control Range】Compared with other remote control ranges of only 1000-2000FT, KAIYIKAPET upgraded dog trainer can reach 1.15 Mile/5905FT, and the obstacle range is 1/3 Mile /1755FT. Super two-way transmission signal, don't worry about losing the signal..
  • 【Extra Long Battery Life】The rechargeable training collar can be quickly charged within 2 hours, and the dog receiving collar and remote control can work for 90-150 days w....
Check Stock

Sonic Imagery Labs Model 312A Discrete VCA Compressor Limiter Module

  • Ultra Low Total Harmonic Distortion, 0.0004 THD+N @1kHz.
  • Operates over ±10V to ±24V supply rails.
  • Particular emphasis on audio performance.
Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

  • EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
  • DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
  • DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
  • WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
  • LOGARITHMIC POWER METER :The package contains 1 x logarithmic power meter, the size is 6.5*3.5cm/2.6*1.4in, and the weight is about 9g/0.3oz, which can be used as part of automatic gain control and automatic level control..
Check Stock

RIGOL DS1074Z-S Plus Digital Oscilloscope, 4 Channels, 70MHz, 1Gsa/s, 24Mpts, 30000wfms/s, Built-in 25MHz Function/Arbitrary Waveform Generator, Free Trigger and Decoding

  • ...ents such as communication networks. Built-in FFT function and hardware 6-bit counter (channels are selectable).
  • Low background noise, vertical scale range: 1mV / Div to 10V / Div Multiple interfaces: USB Host & Device, LAN (LXI), AUX Meets LXI CORE 2011 DEVICE Class instrument standards and supports remote commands control. Accessories include 4 probes, a USB cable, a power cable and a PDF instruction manual.
Check Stock

YAMAHA R-N303BL Stereo Receiver with Wi-Fi, Bluetooth & Phono

  • Works with Alexa for voice control (Alexa device sold separately).
  • Simple and sophisticated design with two channels of 100 W high-power output. Minimum RMS Output Power: 100W plus 100W (8ohms, 40Hz-20kHz, 0.2 percentage THD).
  • Phono input terminals for turn tables voice control using your Alexa device like echo or echo dot. FM 50dB Quieting Sensitivity (IHF, 1kHz, 100% Mod., Mono) - 3 µV (20.8 dBf). FM Signal-to-Noise Ratio (Mono/Stereo) - 65dB / 64dB.
  • Optical and coaxial Audio inputs for TV. Frequency Response-0 ± 0.5dB / 0 ± 3.0dB. FM Signal-to-Noise Ratio (Mono/Stereo)-65dB / 64dB.
  • Access to your music library, Pandora, Spotify, SiriusXM internet radio, Tidal and Deezer. Standby Power Consumption-0.1W (Network standby on / Wi-Fi connection, 1.8W).
  • Wi-Fi, wireless direct, Bluetooth, airplay, and MusicCast multiform Audio. Network section - DLNA - Version 1.5.
Check Stock

Boquite CNC Motion Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
  • Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 axle motor control differential Pulse and direction output signal,maximum.500Khz per axle.
  • ARM9 main control chip,FPGA core algorithm chip. 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation.
  • After-sale Service. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!.
Check Stock

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock