Reviews0 3mm Nozzle

Hutdkte Pressure Washer Pump for SRMW22G26-EZ 2.2G24, 2.2 GPM 2600-2800 PSI for TroyBilt Karcher Craftsman Generac Fits Most 7/8' Shaft 4-7 HP Engines with Pressure Washer Nozzle

This pump head assembly ready for RMW or SRMW pumps- RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2.2G20D, SRMW2.2G26, RMV2.5G24..
Pressure Washer Pump Fits for Troybilt: 1974-2, 1974-0, 1909-0, 1908-2, 1908-0, 1902-1, 1902-0, 1811-0,.
Pressure Washer Pump also Fits for Troybilt,for Devilbiss/Excell, for Craftsman,for Husky And Others Rated at 2800 PSI and 2.4 GPM with 7/8” shaft 4 - 7 HP engines.
Center shaft to each mounting bolt is 4" - Center to Center Spacing Between Mounting Bolts is: 7 11/16" – 6 3/16" - 6 7/16 ..
Package including: 1x 7/8" Shaft Pressure Washer Pump , 1 Black Brass soap nozzle,1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree),1 Green Stainless Steel Nozzle Tip (25 Degree),1 White Stainless Steel Nozzle Tip (40 Degree) ..

Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).

Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)

ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

[Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
[Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
[High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....

Check Stock

Polishing Bonnet, 9 to 10 In, Wool (Pack of 10)

Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
Overall Size: 11 x 6 x 3mm / 0.43" x 0.24" x 0.12"(L*W*T).
Hole Diameter: 4mm / 0.16"(Max), 3mm / 0.12"(Min).

Check Stock

Pressure Washer Turbo Tip 3000PSI Turbo Nozzle Kit 360° Rotating Presure Washer Turbo Nozzles 1/4'' Quick Connect with 5 Nozzle Tips Kit Multiple Degrees(0, 15, 25, 40,Soap) 3.0 GPM 3.0 Orifice

【Turbo Spray Nozzle Kit】- The presure washer turbo nozzle is made of aluminum alloy and brass 1/4" quick connect plug with a sharp ceramic nozzle and rubber exterior resistant to oxidation and corrosion for better cleaning your garden..
【Powerful Jet of Water】- 1/4" quick connect design, for use with pressure washers up to 3,600 PSI, gallons per minute: 3.0（3 GPM）, nozzle orifice size: 3.0, maximum operating temperature: 114°F. Creates 360° powerful jet of water!.
【5 Pressure Washer Tip】- 1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
【200% Rotate Speed】- Turbo Tip spin in a circular motion (0 degree nozzle is a straight line)at high speeds to increase both the intensity and cleaning area of the nozzle. There is a ceramic ball inside that spins under pressure and the pattern is circular regardless of nozzle position. Turbo nozzles cleans up to 40% faster than..
【Clean Any Area】- The Spray Nozzle is ideal for removing a large amount of dirty.Cleaning of soiled bricks, concrete, vinyl or any other large amount of dirt or heavily soiled areas.It can also strip p....

Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
Tip of the nozzle, aluminum heating block, throat pipe ..

Check Stock

G830 2.0 Gelcoat Spray Gun

【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
2 x 1000ml Plastic Cup (with metal cup cover).
【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
Hold thehandle and hold the gun. The air is ejected from the air jet..
【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..

Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.

Check Stock

10 Pieces Airbrush Nozzle Needle Nozzle Cap Kit with Wrench Airbrush Replacement Parts for Spray Gun Sprayer Accessories 0.2 mm 0.3 mm 0.5 mm

What you will receive: package comes with 3 pieces airbrush nozzle in 0.2 mm, 0.3 mm, 0.5 mm, 3 pieces 0.2 mm, 0.3 mm, 0.5 mm airbrush needle, 3....
Quality material: all airbrush replacement parts are made of quality metal, sturdy and not east to break or deform, durable for long time use and not....
Measurements: airbrush nozzle and needle is suitable for 0.2 mm/ 0.3 mm/ 0. 5 mm airbrush, they are suitable for professional airbrush sprayer and....
Easy to use: with this wrench, you can quickly replace airbrushes, the replacement nozzles and caps fit almost all ordinary airbrush, save you much....
Suitable for: airbrush nozzle replacement kits are suitable for professional airbrush sprayer, easy to install.

Check Stock

Commercial Vacuum Sealer Machine For Food Packaging Starter Kit, BOURGE CHEF BC-MS4OO 15.8\ Vac 2-in-1, Automatic & Manual Modes, Dry & Moist Sealing Design, With Compact Cutter Safety, Led Light, Can Be Used With All Food Saver Bags

【2-in-1 chamber & nozzle Vacuum Sealer】The unique design is convenient for switching between the modes of the chamber and the nozzle vacuum sealers. The various bags on the market, including chamber bags and flat smooth bags are compatible for using. It is the preferred product in commercial and household vacuum equipment..
【8mm Extra-wide Sealing Bar With 16’’ Length】8mm (0.315 Inch) sealing bar provides performance superior to popular 3mm line of other sealers. Adjustable sealing duration adapts to most sealing needs. Separate sealing function directly seals bags without deflation..
【Inflation & Deflation Pump】 High power vac pump ensures ideal vac inflation experiences.
Air inflation mode makes crisps preserved and complete.
More precisely manual control is also recommended.
【For Moist & Liquid】Special designed canister to contain liquid from deflation, avoiding common circuit fault in liquid vacuum sealing. Separate design makes clean , and modification easy and quick.
【Multifunctional Settings】Both manual and fully automatic modes are used, The sealing time can be adjusted between 1-15s as needed, make the bag sealing more firmly and keep food fresh longer. In automatic mode, the pumping time can be adjusted between 1-60 s..

Check Stock