Reviews1 2 Inch J bolts

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

• [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
• [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
• Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
• [Built to Last] Heat-treated carbon steel ensures maximum strength.
• Chrome and black oxide finishes resist rust and corrosion.
• Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
• [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

• Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
• Chrome and black oxide finishes resist rust and corrosion.
• Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
• Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
• Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
• Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
• Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
• The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.

Snow Joe Ultra SJ618E Electric Snow Thrower Hardware Pack

(10) 3/4-10x2#3 Grade 8 Dome Head Plow Bolts Plain & Oil

• Price For: Each Finish: Zinc Material: Carbon Steel Head Type: #3 Flat Item: Plow Bolt Head Angle (Deg.): 80 Type: Countersunk Square Neck Grade: 5 Includes: Nut Square Width: 0.450" Head Height: 0.364" Head Dia.: 0.826" Meets/Exceeds: SAE J 429, SAE J 995 Thread Size: 7/16"-14 Tensile Strength (PSI): SAE J 429, SAE J 995 Length: 2" Key Height: -.
• Key Width: - Country of Origin (subject to change): Multiple.

Berlin Modisch Full Escutcheon HandleSet Front Door Entry Handle and Deadbolt Lock Set Slim Square Single Cylinder Deadbolt and Lever Heavy Duty – Oil Rubbed Bronze Finish

• Deadbolt bore hole and handle set hole must be 5-1/2" apart for proper installation. front door handle set optional through bolt adjustments design for worry free installation..
• Full Escutcheon HandleSet Heavy duty high grade security hardware locksets, entry door knob and deadbolt lock set Includes a reversible handle that makes it perfect for fitting left or right handed doors.
• Uniquely crafted low profile XL square shaped full panel 1 piece exterior door handle entrance set and deadbolt with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker.
• Durable & Portable front entry door handle set secure lock set handleset oil rubbed bronze finish lever front door knob and deadbolt set which Fits 1-3/8-Inch-1-3/4-Inch doors, inactive handleset dummy conversion kit now available search for: B08W8QG85J.
• Designed to complement modern contemporary style exterior doors for commercial and residential applications, Front door handle lock comes with a single cylinder deadbolt that that is opened by an exterior key KW1 keyway for front doors, oil rubbed bronze color entry door handle lockset set.

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

• Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
• Designed for batteries 6.89" (175mm) wide or slightly narrower..
• Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
• Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
• Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).

Homax 80099 No-Sag EasyGate Bracket Kit

• Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
• These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
• To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
• Minimum distance between post and gate should be 1.5.

Synergee Squat Stand Rack with Pulley System, Tricep Rope, Pull Up Bar, J-Cups, Safety Arms, Landmine, Step Plate, Barbell Holder & Weight Plate Storage. 750lb Capacity.

• ...ra set of 10’s. Do weighted pull-ups. Push your limits. Test your PRs. Our Squat Rack can handle it!.
• ★ STRENGTH & BODYWEIGHT STATION ★ – Our V1 PLUS Squat Rack includes upgraded J Cups and safety arms with thick, UHMW plastic bolted to the surfaces your barbell will rest on. Our Squat Racks also have two 12-inch posts to hold bumper plates and aid with storage. It is ALSO fitted with a pull up bar to perform pull ups, set up gymnastic rings, and more! The V1 PLUS additionally comes with a Step Up Plate, Landmine Attachment, and a Barbell Holder..
• ★ RED & BLACK ★ – This steel frame looks incredible with red vertical and black horizontal posts. That means, while it is adding a range of functionality to your space, it also looks AWESOME and will up your home or commercial gym’s cool factor by at least 10 points!.
• ★ WHAT’S IN THE PACKAGE ★ – The V1 PLUS Squat Rack comes with a pull up bar, (2) J cups with UHMW, (2) safety arms with UHMW, (1) barbell holder, (1) step up plate, (1) landmine attachment, and (2) posts for plate storage. The Pulley System includes (1) 2” Loading Pin.
• and (4) Carabiners. The Rack stands 90" tall and has ....

US Motors AST125 Nidec Replacement Swimming Pool Pump Motor

• Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
• Standard 56J-Frame, C-Flange motor with threaded shaft.
• Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
• Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
• Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.

Seachoice Trailer Coupler, Repair Kit, 2 in.

• Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
• Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
• 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
• Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
• Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

• TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
• Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
• PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
• T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
• Bolts and washers are 1/4”-20 x 1-1/2-inch.
• Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
• EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
• Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
• BUILT TO LAST: T knobs package includ....