Reviews1 25g Sfp Transceiver

StarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)

Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
PCIe GbE Fiber Network Card with Open SFP Slot.
Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
Compatible with most Gigabit SFP modules.
Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
Includes low-profile/half-height installation bracket.
Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.

Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..

Check Stock

20 Fiber Optic Visual Fault Locator Replacement Parts - 10x Ceramic Tube Sleeves with 10 Fitting Connectors

Supported throughput up to 10.5 Gbps with Multi Mode fiber for distances up to 550 m (1804 feet).
Digital Diagnostics Monitoring (DDM) support.
Operating temperature: 0 to 70 °C (32 to 158 °F).

Check Stock

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant..
Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing..
Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches..
If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver....

Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

[Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
[Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
[High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
[After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us..

Check Stock

6COM 2Pack 10GBase-T SFP+ Transceiver SFP+ RJ45 Copper Module for Cisco SFP-10G-T-S Ubiquiti UF-RJ45-10G Netgear D-Link Supermicro TP-Link up to 30m

Strong Compatibility - fit for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, D-Link, Supermicro, TP-Link..
10GBASE-T SFP+ RJ45 Copper Transceiver - 10G rate, RJ45 Copper connector, support links up to 30m over Cat6a/ Cat7..
Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from....
High Quality - All of products are manufactured under strict quality control system, every module has been tested one by one on different switches....
After-sales Service - 30 days Free-Returned, 3 years Free Warranty and lifetime technology support, please contact us, any product quality and....

Check Stock

ECHOGEAR 10U Network Rack - Wall Mountable Heavy Duty 4 Post Design Holds All Your Networking & AV Gear - Open Frame Design Includes 2 1U Vented Shelves & Mounting Hardware

✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.10 Pack.
✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, D-Link, TP-Link and Other Open Equipments with 10G SFP+ Port..
✅Hot-pluggable: PLUG and PLAY,operating temperature range: -20℃ to 70℃. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments..
✅Low Power Consumption: The power consumption is only less than 2.5 Watt, that can save costs wisely. Low EMI. Each sfp+ module is individually done test before packing..
✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support..

Check Stock

LC-LC OM3 MMF Duplex Fiber Optic Patch Cable 1-Meter 3.3-ft

A MANUFACTURER - 14 years ISO certified manufacturer, assembly SFP transceiver, fiber patch cords, media converter and networking system..
HIGH QUALITY MATERIALS - PVC/LSZH fiber cable.
RELIABILITY TESTING - 100% insertion loss test.
MMF: Insertion loss≤0.3(dB), Return loss≥-30(dB)..
STANDARDS COMPLIANT - TIA/EIA 568-C.3 / 604-10 / 492AAAA, IEC60793-2-10 A1b, CE and RoHS..
WIDE APPLICATION - works with all brands of multimode SFP transceivers and fiber optic networks..

Check Stock

A Pair of HDMI to Fiber Optic Converter HDMI Extender with SFP+ Transceiver SFP+ LR Lite Module up to 2km Link Length Support HDMI 1.4a 4Kx2K@30Hz

Supports HDMI 1.4a signal, [email protected], 3D video..
2pcs free SFP+ LR Lite Transceiver with link length up to 2km included..
SFP+ port is designed to meet transceivers with different link lengths..
The DVD side should be linked to signal source and TV side should be linked to display device.
RAW signal transmission, uncompressed audio and non-delay..

Check Stock

Ethernet to Fiber Converter,OPTONE 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber MMF 850nm550m 0.5Km SC Connector

In compact size, zero configuration, support 100-240V power suppply,auto staus LED’s,good way to get a fiber to ethernet extension to your network..
Optical port: Gigabit Fiber, Multi-Mode SC SFP SX Transceiver up to 0.5KM 850nm.
RJ-45 Port : 1 port 10/100/1000Mbps, for connecting with UTP/STP Cat.5e cable.
Supporting: 10 Mbps or 100 Mbps, full or half-duplex mode, or 1000 Mbps full-duplex mode,Supports auto MDI/MDIX function ,9k jumbo frame, complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards,IEEE 802.3x auto-negotiation,independent LFP function.
What You Will Have: 1* fiber sfp media converter.
1*user manual, 24-month warranty Lifetime technology support.

Check Stock

Mini HD SDI Fiber Extender 1080P HD-SDI Over Fiber Converter Broadcast Level SDI Video Optical Transceiver Single-Mode Single Fiber 20km with RS485 Tally and Loop Output

HD-SDI Video: The SDI Fiber converter support HD-SDI with 8-channel audio embedded, resolution up to 1080P&30HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s..
Support Rs485&Tally: The HD SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast..
Compact Size: The SDI Fiber Extender only 1.7*0.9*2.8 inch in size, it’s so small and can install on cameras..
Loop output: The HD-SDI Fiber Optic transceiver support loop output, you can see the image easily in local side..
Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource..

Check Stock