Reviews1 4 Hp Motors

MotorGuide 8M0120717 Xi Series Quick-Release Mounting Bracket Kit for Trolling Motors — Composite — Black

【Material】- Polished Stainless Steel Construction can be used in salty water and they will stand up to rough use.
【Application】- Suitable for 2-stroke Motors 7-1/2 HP to 20 HP.can be used on sailboats, powerboats, locks and holds motor up or down in 5 vertical running positions.
【Spec】- Capacity: 110 lbs, Vertical Lift: 10.5".
【Adjustable】- 5-position Locking Height Adjustment.
【Size】- Broad Size: 8-1/4" * 10-3/8" (210mm*264mm) Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).

Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
Package included:1x 12 Teeth Centrifugal Clutch, 1x #35 Chain, 2 x built-in screws and 1 x Connecting Link, Easy installation, a perfect replacement part for your mini bike and go kart..

Brand NEW WEG Compressor Duty Electric Motor 5HP 56 FRAME 20.3 AMP 230 VOLT.
DESIGNED TO REPLACE 56 FRAME MOTORS ONLY, INCLUDES MANUFACTURERS WARRANTY.
5HP 56 FRAME 3440 RPM 5/8" SHAFT DIAMETER.
230 VOLT MOTOR ( NOT SUITED FOR 208 VOLT APPLICATIONS).
WILL REPLACE 56 FRAME 5/8" MOTORS AND 5HP SPL MOTORS UNDER 15-21FL AMPS @ 230VOLTS.

MOMENTARY SWITCH: (spring action) only engages while the user is pushing the handle. This switch will spring back to off position when handle is released..
WIRING: Please refer to your motors wiring instructions on how to wire switch.
Max 1.5 HP at 120Vac Motors or Max 2 HP at 240Vac Motors.
Highly visible red handle with enclosure that is IP65 rated..

Centrifugal Clutch 3/4" Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300±300 PRM.
Fits Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc.
Fit Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
Go Kart Clutch kit includes two set screws and chain.

The ROP Shop replacement Power Pack Assembly for 1997 Johnson, Evinrude 5, 6, 8, 25 HP Outboard Motors.
Specs - Refer to images 2 & 3 for more information.
Fits/For: 1985-2001 (4-60 HP) & 2003-2005 (6-8 HP) engines with a 2 wire timer base NOT requiring an RPM limiter.
Uses a 2 wire trigger sensor. Please be sure to check your part or model number to ensure this is the correct switch box for your unit. Also, please....

Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches white poly mounting board for the new wider style motor locking clamps. Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
They are designed for 4-stroke engines. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
Built especially for new four strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary engines with ease.

Top Quality CNC-Machined KIPA Carburetor Replace for Briggs & Stratton 591731 796109 594593 590400 796078 498811 794161 795477 Replace For Nikki OEM....
Fitment: Carburetor Replace for Briggs & Stratton 14.5Hp, 15Hp, 16Hp, 17Hp, 18.5Hp, 19.5Hp, 20Hp, 21Hp Intek Engine motors. Please do Match Carb....
Fitment: Replace for Briggs & Stratton 31A507 31A607 31A707 31A777 31A807 31B775 Series Engines.
Package including: 1 X New Carbuertor, 1 X Mounting Gasket, 1 X Plastic Tip, 1 X Fuel Line, 1 X Carbon Dirt Jet Cleaner Tool Kit For future carburetor....
This carb is a direct replacement for the OEM. Easy to install, the manual is not inlcuded, However, You may search some manual on tube. The only....

It is made of Stamped 304 Stainless Steel, Spring loaded 4 vertical positions adjustable bracket, Base is made of Plastic..
Stainless steel construction is non-corrosive for saltwater use, making its life service longer..
HP Rating: To 20 HP, Mounting Size: 8” ×8-5/8”, Broad Size: 8-1/4” *10-3/8”,304 stainless steel is thick 2.5 mm. Suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 50 kg (110 lbs)..
Easy to lift and lower – Stainless springs help counterbalance motor weight..
Heavy duty with reinforced welded frame and stamped stainless components. Wide track body for added stability..

2 Motors: 3/4 hp (0.55kw) Single Phase @ 110 Volt.
Airflow Rating: 3,700 CFM (1,850 x 2 CFM).
2 Removable Dust Collector Drawers: 19" x 11" x 3-1/2.
Unit Dim (in): 64-1/2 x 24-1/2 x 34-12 *Estimated* ( 30" with table guard removed ).

✅ Suitable for 2-stroke 7-1/2-20HP motors, with a maximum weight of 52kg (115lbs), very suitable for small and medium motor boats and yachts..
✅ Stainless Steel Springs Counter-balance Motor Weight.
✅ Base material: plastic, Frame: anodised aluminium, screws: stainless steel.
✅ 4-position Locking Height Adjustment.
✅ Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
✅ Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
✅ Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options..
✅ Sturdy design with smooth, spring-assisted lifting action Fully adjustable with 5 stop locations..
✅ Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components..
✅ Please feel free to cotnact us if you have any questions..