Reviews1 4 Inch J bolts

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

  • Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
  • Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
  • Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stock

Tahikem 4 Pcs Kayak Rack Wall Mount, Canoe Hanger Hooks, Kayak Storage Hook, Garage Hanger Ladder Brackets, for Hanging Outdoor Beach Folding Chair Bicycle Surfboard Snowboard Paddle Board - Black

  • ...ehouse. High-quality storage hooks can hold a variety of large tools, suitable for storage of large items such as shovels, canoes, kayaks, snowboards, ladders, tools and wood..
  • 【 PACKAGE & BEARING CAPACITY 】4 sets “J” type wall mount garage hooks + 4 pcs nylon storage strap. Kayak storage hook size is 10-1/2 Inch x 15 Inch (38cm x 26.5cm). The diameter of the round tube steel is 3/4 inch (2cm). The maximum load-bearing capacity is 50 pounds..
  • 【 QUALITY MATERIAL & EVA ARM 】Round tube steel and no welding process make the canoe hanger hooks strong. The black non-slip EVA arm is useful for fixing objects, protecting the surface from scratches or damage, and preventing the canoe(kayak/Ski board/ladders/etc.) from slipping off..
  • 【 EASY TO INSTALL 】This Tahikem kayak hangers can be installed on plaster, wooden, brick and concrete walls. Only 3 steps to complete the installation: 1) Drill 2 holes in the wall. 2) Use a hammer to knock the yellow plastic bolts into the hole. 3) Use an electric drill to fix the screws and kayak hangers into the plastic bolts..
  • 【100% Satisfaction】 30 Days Satisfaction Guarantee. If you have any question about the canoe hanger hooks, please contact us. We will reply within 24 hours..
Check Stock

MEROM Halo Bolt AC Adapter Halo Wall Plug Car Jump Starter Charger Cord Replacement Compatible with Halo Bolt 55720/58830/Halo Bolt 1201 Jump Starter/Bolt ACDC Wireless/Bolt Air Portable

  • 【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
  • 【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
  • Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
  • Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
  • 【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
  • 【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..
Check Stock

Tnisesm Adjustable Battery Hold Down, with Universal Crossbar 8 Inch 304 Stainless Steel J Hook Bolt Sets

  • Car battery hold down is made constructed with Premium iron crossbar & 304 Stainless steel j bolt sets, sturdy, and available for long service life.Special spray process for enhancing its corrosion and rust resistance..
  • Universal adjustable crossbar, from 13.5cm/5.35" to 20cm/7.85" wide, with 8inch J-Bolt..
  • The surface is anodized for a matte and durable finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing..
  • Simple design,easy installation, replace your old battery holder directly..A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

  • Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
  • J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
  • 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
  • J-Bolt thru post hinges are easily adjusted even after the gate is installed.
  • Nuts for gate hinge are included - Washers are NOT Included.
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 5/8 Inch - LM144

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

Rod Desyne Clam Holdback Pair for Windows Satin Nickel

  • This Clam holdback pair includes two finials, two J hooks and mounting hardware.
  • Each finial size: L: 3-1/2 inch, W: 2-3/4 inch.
Check Stock