Reviews1 8inch Tft Screen

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
with a capacitive touch panel. Supports 5-point touch..
3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..

The 3.2 tft lcd expansion board is compatible with arduino mega 2560.
With tft lcd shield, you can use 3.2 touch screen with mega more conveniently.
This 3.2" lcd shield is NOT compatible with all 3.2" tft lcd. Please chheck it carefully..
You can buy 3.2" tft lcd for the shield by "Visit the DIYmalls Store".
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..

✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..

【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
Upgrade the firmware by SD card. It is easy and convenient to....
【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....

Compatible With: For Nintendo DS Lite Or Resistive TFT Touch Screen. For Arudino TFT Screen..
Keep your screen free from scratches and fingerprints..
Easily snaps inside a convenient storage slot on the back..

Enjoy TV broadcasts (ATSC/NTSC tuner) Additional external antenna for enhanced Play multimedia files from USB and SD memory cards TV reception.
Digital multimedia support: JPG, MP3, MPEG2, MPEG2_HD, MPEG4, MPEG4_SD, MPEG4_HD, H.264, FLV.
3-way power: AC power adapter, DC car adapter, and rechargeable battery Two A/V input connectors and external antenna.
Headphone jack (3.5 mm) and built-in stereo speakers Screen Type: 9" TFT LCD (800 x 480) Removable Memory Support: USB, SD.

【TFT Color Screen】2.4in TFT color screen, intuitive menus and easytoread results, energysaving and convenient to use, it can bring you a feeling of relaxation, pleasure, and a good mood. Support T9 input method, which can directly input employee information on the attendance machine. When you process employee attendance records, you will see all the information clearly, and the large display..
【How To Use】1. Add users in the user management interface.
2. Binding the attendance machine to the attendance system to realize the attendance function.
3. Employee data can be entered directly on the attendance machine. Suitable for office, factory, hotel, school, restaurant, retail store, hospital..
【Easy To Operate】1: N fingerprint recognition mode, recognition speed 1.0s, accurate high standard fuzzy recognition, and support password authentication methods. Do not need software, implant complicated attendance software into fingerprint attendance machine..
【Energy Saving Equipment】Strictly follow the national security product standard. Adopt energy saving fingerprint sensor and power management function, which makes time tracking easier and reduces management workload. When staff is not scheduled, the check in and check out time can be defined ....