Reviews100 Watts Portable Amplifier

CT Sounds CT-150.4D Full-Range Class D 4 Channel Car Audio Amplifier, 1000 Watts RMS

  • 4 channel amplifier car audio with 250 watts RMS at 2-ohm load x 4-channels (14.4v).
  • 150 watts RMS power at 4-ohm load x 4-channels (14.4v).
  • 475 watts RMS at 4-ohm bridged x 2-channels (14.4v).
  • Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application.
  • but dont let the size fool you, this 4ch car amp produces amazing sound quality.
  • MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier.
  • Show your friends you can do 100 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this amplifier for car speakers.
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

Alpine R-A90S R-Series 6/5/4/3 Channel Power Amplifier with Staggered Power

  • 6-channel car amplifier, 75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms, 100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms, 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohms.
  • GTO (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input.
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier.
  • Staggered power amplifiers are perfect for a 3-way front-stage setup,and work great for a front/rear/sub stereo as well..
Check Stock

Rockville RCS180-6 180 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth

  • Rockville RCS180-6 180 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth.
  • Rockville rcs180-6350 watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 4-16 ohm binding post speaker output..
  • 6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max)..
  • (2) sets RCA aux inputs. (3) mic inputs. Rca line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. Shared negative speaker output terminal.
  • Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -68.1Dba. A weighted signal to noise (referenced to full 4 ohm power) -89.2Dba. Frequency response: 49Hz to 14.9 kHz. Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms: 0.89%. weight: 22.7lbs. Dimensions: 19” x 16” x 4” inches.
Check Stock

Samson Expedition XP800 800-Watt Portable PA System & LS50P Lightweight Speaker Stands

  • Product 1: Ideal for small to medium-sized venues (audiences of 60-100).
  • Product 1: Packs up into a single portable unit that weighs just over 40lb.
  • Product 1: Lightweight Class D amplifier produces 2 x 400 watts of stereo power.
  • Product 2: Pair of lightweight telescoping speaker stands with tripod bases.
  • Product 2: Ideal for use with Samson Expedition Portable PAs (XP150, XP308i, XP1000).
  • Product 2: Adjustable up to 6 feet in height.
  • Product 2: Standard 1 3/8-inch pole adapters fit virtually all PA speakers.
Check Stock

Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w RMS+PA Microphone

  • Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone.
  • Features: Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone. 2400 Watt Peak/1200w RMS. PA Microphone Included..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 100 Watts) at 4 ohms and 1% THD+N..
  • 600 Watts (4 x 150 Watts) at 2 ohms 003c 1% THD. 2 x 300 Watts bridged @ 4 Ohms 003c 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms)..
  • High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHzCrossover Bandpass Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors.. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Microphone Sensitivity: 100dB @ 1w / 1m.
Check Stock

KICKER 48KMA3604 360 Watt 4-Channel Marine Amplifier Boat Amp KMA360.4

  • Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms 97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7" x 1.98" x 12.25".
Check Stock

OSD 100W Stereo Amplifier Dual Source Input Bass & Treble Control Auto-On Class D XMP100

  • POWER: The XMP100 has 75 watts RMS per channel and bridgeable outputs for 160 watts RMS. This amp can power Dolby Surround Sound systems and enhance....
  • SOUND QUALITY: With Class D amplification, the XMP100 is 89% efficient while creating a cleaner sound. An input of 1.4 volts is needed to reach full....
  • SOURCE SWITCHING: Enables users to connect more than one source to the amp. The amplifier has the ability to automatically switch sources from a DVD....
  • CONTROLS: Balance knobs and volume controls are placed on the front while the treble and bass are located on the back. They are ideal for easy use....
  • CONNECT: OSD Audio recommends using a 3.5mm aux to RCA cable to utilize your smartphone on the amp. Connecting your portable device is made easy to....
Check Stock

pkg 130A1 SG - Focal 5.25' 100W RMS Access 1 Series Component Speakers System + SOLID2 Black - FOCAL 2-Channel 200W RMS Power Amplifier

  • 130A1 SG - Focal 5.25" 100W RMS Access 1 Series Component Speakers System.
  • SOLID2 Black - FOCAL 2-Channel 200W RMS Power Amplifier.
  • 130A1 Power Handling: Peak: 200 watts per set / 100 watts each side RMS: 100 watts per set / 50 watts each side.
  • SOLID2: 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms) | 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode).
  • Solid2 Dimensions: Dimensions: 8-11/16"W x 2"H x 7-7/8"D | 130A1 Mounting Depth: 61.3mm.
Check Stock

Rockville RGHR45 4 Zone Marine Gauge Hole Receiver Bluetooth/Radio/Wired Remote & RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator

  • ...ver with 4 Zones that each have independent volume control, Includes wired remote with the ability to control the volume in each zone, 3” TFT color display makes it easy to navigate, Built in Bluetooth/USB/AM/FM playback, Fits into a standard Gauge-Hole (Tachometer) Opening, Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS), 3 pairs of pre-amp outputs..
  • Product 1: 4 zones each with volume control (zone 1 = built in amplifier, zone 2 and 3 are RCA outputs, and zone 4 is the sub output), Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat), IP66 Waterproof Certification (Tested to withstand the elements), USB Input to play back audio files store on a USB thumb drive or any other USB device, USB plays video, RCA A/V input to play back a video source, Rear camera input, RCA Aux Input..
  • Product 1: AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning, Bluetooth built in to stream audio from any Bluetooth enabled device, USB Input Charges Your Phone, Big easy to use buttons, Back-lit 3 inch TFT display, IP66 waterproof level, meet ASTM B117 and ASTM D4329 standards, Humiseal coated PCB board for waterproofing and protection from the elements, Required cutout: 2.99" (diameter) x 4.96" (depth) x 4.53” (t....
Check Stock

Samson RS110A 10\ 300-watt Active Loudspeaker with Bluetooth

  • Ideal for small-sized venues and rooms (audiences of 75–100).
  • Packs up into a single portable unit that weighs less than 30lb.
  • Lightweight class D amplifier produces 2 x 150 watts of stereo power.
  • Dual 2-way speakers with 6" Woofers and 1" Hf drivers.
  • Removable 6-channel mixer with digital effects and USB wireless port for use with Samson xpd USB digital wireless Systems (Sold separately).
Check Stock