Reviews10oz Copper Pcb

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
Note: This is not original Arduino product.it only a substitute accessories from ARCELI.

Check Stock

MSI MEG Z690I Unify Gaming Motherboard (Mini ITX, 12th Gen Intel Core, LGA 1700 Socket, DDR5, PCIe 5, 2.5G LAN, M.2 Slots, Wi-Fi 6E)

Supports 12th Gen Intel Core Pentium Celeron processors for LGA 1700 socket.
Outstanding Cooling Solution: Frozr Heatsink, VRM Heat-pipe, Aluminum Cover and M.2 Shield Frozr ensure the extreme performance with low temp.
2.5G LAN with latest Wi-Fi 6E: Onboard 2.5G LAN with LAN manager and latest Wi-Fi 6E solution which supports 6GHz spectrum delivering the best online gaming experience.
10 Layer PCB with 2oz Thickened Copper: Provides higher performance and long-lasting system stability without any compromise.

Check Stock

LANTRO JS 5pcs EMC EMI Near Field Probe Set, Near Field Magnetic Field Probe, Anti Interference RF Explorer SMA Conductive Radiation Test Antenna Kit, SMA Male Thread

Product Material----PCB adopts 1.6mm thick double‑sided board, 1.5 oz copper thickness, and the whole process of spraying tin to make sure good passing performance of large and small currents..
Fully Shielded Magnetic Field Probe----Greatly suppresses electromagnetic clutter interference in the external environment, improves the dynamic range of the entire system, and helps to improve the accuracy of position detection..
Function----Phase noise and spectrum components can be combined with a low‑noise preamplifier for measurement. It can help you find and identify potential sources of interference within the components of electronic components..
5PCS Probes---- There are 5pcs probes, can meet your use and replacement needs, convenient and practical. Small size, with case, easy to carry and store..
Note----When using, the PCB board should not be touched by hands ,Vertical use at frequencies exceeding 2 GHz..

Check Stock

4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)

Soldering Iron Tip Cleaner - the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature. Made of brass wire, it is cleaner than traditional sponges. Safe and clean to use..
Solder wire - weight 1.76 oz / 50 g. Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding..
Rosin - weighs 0.35 oz/10 g. Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections..
No-clean desoldering core - 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards..
Welded 4-in-1 set---- contains 4 necessary welding products, saving you time to purchase multiple times..

Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
FR-4 fiber glass PCB, dual copper layers..
2x20 positions header connect to Raspberry Pi board..
Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..

Check Stock

Thermaltake Pacific V-GTX 10 1080/1070 Nickel Full Cover Transparent GPU Water Block, Clear CL-W134-CU00TR-A

Compatible with NVIDIA GTX 1080 founders Edition and GTX 1070 founders Edition graphic cards.
Transparent design: Offering a Transparent full cover water block for ideal coolant viewing and proper protection of PCB components.
Copper cold plate: nickel plated copper cold plate provides exceptional cooling performance and protection.
Micro-channel structure: featuring 0.5mm micro-channel fin construction for extreme heat dissipation.
Back plate included: gain proper protection to the back of the PCB with a custom 4mm thick aluminum alloy back plate..

Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

Package Included: 1x plate.There is no screws and copper stand included..
Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
This plate is anodized brush finished.It can only use with plate mounted stabilizers.
If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..

Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.

Check Stock

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

Pitch 3.81mm/0.15" screw terminal block..
Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
FR-4 fiber glass PCB, dual copper layers..
Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..

Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

... size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
Please check the size carefully before purchasing.
Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and efficiency to your work.

Check Stock

Antrader Breadboard Jumper Wires 40 Pin 10CM Female to Female for Raspberry Pi

Package: 1 piece of the 10cm 40pin female to female multicolored jumper wires cables..
Jumper wire length: 10cm/3.94 inch(F/ F).
Connectors: 40pin female to female header.
Compatible with 2.54mm spacing pin headers..
Made of high-grade copper wire material, safe and durable to use..
The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers..
Can be used for electronic project, genuine breadboard kit project, PCB project, PC motherboard, etc..

Check Stock