Reviews10w T8 Tubes

Ghiuop 25-Pack T8 LED Bulbs 4 Foot Tube Light, 4ft LED Shop Garage Warehouse Light, 20W 5000K 2600LM Daylight White, Fluorescent Lights Tube Replacement, Ballast Bypass, Dual-end Powered, Clear Cover

  • ...ur old 40 watt fluorescent tube with 20w LED lamp. The LED t8 light tube bulbs are widely used in shop, warehouse, garage, mall, hotel, office, convenience store, gas station, parking lots etc..
  • 【Premium Quality & Long Lifespan】: T8 LED bulbs are made of aluminum. Compared with the glass light tube, Ghiuop light tubes not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years). Reduce led light tube replacement frequency, saving money and time..
  • 【Reliable Lighting & Shatterproof 】Zero flickering light, zero delay, and zero worries with 48" LED t8 lights that provide high quality indoor and outdoor lighting. The 4ft led bulbs have been packed very well with Styrofoam cushioning and end cap to protect them. t8 led light has shatterproof property because it is equipped with an aluminum body and a frosted lens..
  • 【Easy Ballast Bypass Installation】Fluorescent replacement is simple and LED retrofit can be done easily with a ballast bypass installation. These 4FT LED lights aluminum light fixtures are designed with a dual-ended power supply and require only a simple ballast bypass installation. For more ....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 3000K

  • ...ring and installation of this product should be performed by a qualified electrician to NEC standards. Although these lights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is al....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • ...ring and installation of this product should be performed by a qualified electrician to NEC standards. Although these lights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is al....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

The Axiom

  • ✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends！.
  • ✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 2640 lumens) ..
  • ✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
  • ✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
Check Stock

Technical Precision Replacement for SUNPARK SL15T Ballast

  • Specifications: 120 Volts, T8 and T12 Ballast with Rapid Start Method, Minimum Starting Temperature -10 F Degrees.
  • Lamps Operated: (2/1) F32T8, (2/1) F25T8, (2/1) F40T12, (2/1) F34T12, (2/1) F30T12, (2/1) F25T12, (2/1) F20T12 Linear Tubes or (2/1) PL-T32W, (2/1) F26TBX GX24q-3, (2/1) F26DBX G24q-3, (2/1) F36BX/2G11, (2/1) F39BX/2G11, (2/1) F40BX/2G11 4-pin CFLs.
  • Disclaimer: Technical Precision recommends double-checking specifications of your lamp, fixture, device, and/or appliance as well as the dimensions of your old item before purchasing our products. This item is a Technical Precision replacement product and is manufactured by Technical Precision. If you have questions, inquiries, or feedback, please do not hesitate to contact our customer support..
Check Stock

2FT LED Tube Lights, 24' 8W(25W Fluorescent Bulb Replacement) LED Tube Light Fixture, Two Pin G13 Base, 6000K, Works Without Ballast, Dual-Ended Powered, Frosted Cover, Pack of 4

  • ✔Pack of 4, 8W G13 LED Tube Light Bulbs, Great replacement of F18T8 F20T10 F20T12/CW Fluoresent Lights, 1120LM, 6000Kelvin, Dual End Powered, LED Tube lights 2FT come on quickly and reliably, bulbs are perfect for place where you need lots of light, such as workshop basement garage barn.
  • ✔ENERGY SAVING: Save 52% on your electricity bill! Replace 20W fluorescent tubes by 8W 2FT LED Tube Light . Reduce re-lamp frequency with a lifetime of 50,000+ rated hours (17 years with 8 hours/day 365 days).
  • ✔EASY INSTALLATION: Existing ballast needs to be removed or by-passed. International standard shape for T8 LED Tube light 2FT. easily fitted Instead of traditional fluorescent tube lamps..
  • ✔SAFETY: Like all other LED tubes on market, our T8 led tube lights 2FT take the less fragile plastic covers, so the special flame retardant material on the double ends is very important for avoiding the risk of fire disaster, which may caused by unexpected short circuit etc..
  • ✔ QUALITY ASSURANCE - 3-year unlimited warranty, easy and fast replacement is offered if any quality issue.
Check Stock

Sunco Lighting 30 Pack T8 LED 4FT Tube Light Bulbs Ballast Bypass Fluorescent Replacement 5000K Daylight 15W Clear Cover Retrofit Single Ended Power SEP Commercial Grade – UL DLC

  • Top Rated 15W T8 LED Tube Single Sided Ballast Bypass Type B with G13 Base.
  • ✅ 2 FOR 1 - Convert to LED for instant energy savings (up to 85%). 1 Sunco LED tube does the job of 2 fluorescent tubes. Our T8 LED tubes provide....
  • ✅ COMMERCIAL GRADE - We test each product for optimal performance and safety. Certifications: UL, DLC, FCC, RoHS. Specifications: Clear Cover,....
  • ✅ EASY BYPASS INSTALL – Install with bypass the ballast in 5 minutes or less. Locate the ballast, cut the hot and neutral wires, then cut the....
  • ✅ SUNCO BENEFITS - 5-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading....
Check Stock

4FT LED Tube Light T8 T10 T12 LED Bulb 32W 60W Equivalent 4160LM 6000K Daylight Clear Cover Medium Bi-Pin G13 Base,4 Foot Fluorescent Tube Replacement 12 Pack

  • T8 4ft LED Light Tubes - Pack Of 12 light bulbs.
  • T8 LED Tube - 32 Watt,4160lumen,G13 Bi Pin Base.
  • Equivalent 60w fluorescent light,Daylight white (6000K) Color.
  • They are compatible with existing T8, T10, and T12 fluorescent fixtures.
  • LED Tube Light last 10x longer than fluorescent bupounds ,No UV or IR radiation,Shatterproof, Instant On.
Check Stock