Reviews110 Impact Tool

NECABLES Keystone Punch Down Stand and Plastic Punch Down Tool with Stripper

★ Punch down stand provides a convenient base for terminating your keystone jacks.
★ Compatible with most regular keystone jacks, RJ11 / RJ12 / RJ45, 90 degree or 180 degree.
★ Engineering plastic housing makes it a hard surface and not easy to be scraped or cracked.
★ Small impact tool with sharp blade is used to punch down wires into 110 blocks.
★ It also can be used as a stripping tool, an ideal stripper for CAT5E,CAT6 and CAT6A ethernet cables.

Check Stock

Hiija Punch Down Tool Kit with 110, BK Blade, and Network Wire Stripper Tool Kits Professional

Inserts and cuts terminations in one simple operation for cat6a cat6 cat5e cat5 and network cable.
Precise blades are interchangeable and reversible between 110 and bk standards.
Easy to handle comfort grip, adjustable impact-force settings (lo/hi) for various cable termination applications.
Professional-grade impact tool with twist and lock sockets accommodates most blades for punchdown tools.
Extra wire stripper makes wire cutting more convenient.

Check Stock

Metabo HPT Rotary Hammer | SDS Plus | 1-Inch, 7.5-Amp | For Drilling | Chipping and Hammer Drilling (DH26PF)

SDS Plus Rotary Hammer for drilling, chipping, and hammeriing.
MOTOR: 7. 5 Amp motor that produces 2. 4 ft/lbs of impact energy for powerful hammering with fast drilling.
POWER: 0-4, 300 full-load impact rate delivers forcible hammering.
APPLICATIONS: Ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering.
drilling only, hammering only and hammer drilling for flexibility within a range of applications.
SPEED CONTROL: Electronic variable speed control gives the tool a no-load RPM of between 0-1, 110 and 0-780 in reverse.
ANGLE ADJUSTMENT: Available on mode selector dial to change the chisel bit to different angles.
LIGHTWEIGHT: Only 6. 7 lbs and compact for better maneuverability and less fatigue.
HANDLE: Double-molded 360 degree side handle for comfortable operation and better control.
EASY BIT REPLACEMENT: One-push bit mounting makes changing out bits quick and easy.

Check Stock

Jonard Tools EPD-91461, Manual Punchdown Tool with 2 Steel Blades 66 and 110 for Punchdown Blocks

WHAT’S IN IT: Punchdown Tool, 66 Blade, 110 Blade.
CONVENIENT DESIGN: Sleek and ergonomic design with combination hook/spudger stored in the chassis and enlarged blade storage compartment for easy storage.
COLOR CODED: Color coded body is half yellow (cut side) and half blue for ease of use.
HIGH DURABILITY: Tested up to 100, 000 cycles at high impact setting and blades are made of hardened alloy steel and nickel plated to ensure long life during use.
VERSATILE USE: Adjustable high/low impact settings and compatible with all of our EPB-series blades and other similar brands (sold separately).

Check Stock

Punch Down Tool with 110/88 Blade & Network Wire Stripper, Multifunction Hook Tool for Telephone Impact Terminal Insertion and cat6a/cat6/cat5e/cat5 Cable

【Superior Performance】Interchangeable and reversible blades, blade storage hole, also with Hook Line Knife & Flathead Screwdriver. Professional punch down tool inserts and cuts terminations in one operation..
【Universal Design】Precise blades are between 110 and 88. Rotate the blade 90 degrees clockwise to fix it and 90 degrees counterclockwise to release it. Blade can be storage in the end of the handle makes the storage more convenient and safe..
【Ergonomic Design】Adjustable impact-force settings for various cable termination applications and blade release setting for fixing or releasing the blade. Hook line knife to pull the cable from module. Flathead screwdriver to take the module out of the patch panel..
【Convenient and Fast】Durable punch down tool, one simple operation for Cat6e/Cat6/Cat5e/Cat5 network cable to keystone jacks and phone installation. The extra wire stripper makes wire cutting more convenient..
Wire Stripper x1. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support..

Check Stock

DEWALT 20V MAX Power Tool Combo Kit, 4-Tool Cordless Power Tool Set with 2 Batteries and Charger (DCK444C2)

DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
DCF885 Impact driver in the cordless tools combo kit offers 1-handed loading for its 1/4-inch hex chuck and accepts 1-inch bit tips.
DCS355 Oscillating tool in the drill/ impact driver combo kit offers a Quick-Change accessory system that allows blades and attachments to be changed quickly without wrenches..
DCL040 LED Light helps illuminate your work area with an output of 110 lumens..

Check Stock

BeHappy Cordless Drill Combo Kit 21V, 1/2 Inch Brushless Power Tool Kit and 1/4 Inch Impact Driver, Electric Drill Kit with 2 Batteries and Charger, DIY

...: The drill driver with a max 21V can provide 1000in-lb (110Nm) torque, and the 19+1-position clutch has two modes for you to choose from. At the same time, it has 2-speed transmissions (0-500RPM/0-2000RPM), thus avoiding overdriving screws. The cordless drill set can handle most drilling and driving tasks.
1/4 Inch Impact Driver: The impact driver can generate up to 2600 in-lb（300Nm） torque, while the variable speed switch provides 0-2600RPM and 0-3300IPM, which can handle most fastening tasks, ideal for repairing work, furniture assembling, and other DIY hand working.
The direction-of-rotation selector located above the trigger switch allows you to change the direction of bit rotation.
Brushless Design: The brushless drill combo kit is different from the traditional brushed drill, eliminating the need for the conductive carbon brush of the traditional brushed motor, no maintenance, the failure rate will be lower in comparison, and the operating time and voltage will be more stable. The power drill combo kit will also have a longer service life, with less interference with radio equipment and less noise.
Ergonomic Design and LED Lights: The non-slip handle of the power tool combo kits is made of soft rubber, which is ergonomically designed and....

Check Stock

Cable Matters UL Listed 6-Pack RJ45 Shielded Keystone Jack with Integrated Shutter

Cat6A connector is backwards compatible with Cat 6 and Cat 5e bulk cable.
180 degree easy termination jack supports tool free or crimp tool termination.
A 180 degree wide-angle, hinged design provides easy access and termination.
Tool free cap has universal T568-A or T568-B labels.
IDC modules accept a 110 impact tool for wire insertion.
compatible with the Cable Matters Cat6A Crimp Tool Model 180087.
Superior construction combines a one piece metal keystone to suppress EMI/RFI electromagnetic interference, NEXT, and AXT crosstalk.
Stickers on the inside prevent accidental contact with the metal housing.
Integrated metal collar assists with cable strain relief.
Snap-in retaining clip ensures a secure connection.
Auto-closing shutter protects the RJ45 contacts.
Plug in a Cat6A patch cable to open the shutter.
PoE plus compliantShielded RJ45 connector for IEEE 802.3at Power over Ethernet (PoE+) network applications up to 30W with a Cat 6A Ethernet cable.
Standards compliance includes a UL listed flammability rating, TIA/EIA 568-C.2, IEEE 802.3an 10GBASE-T, and ISO/IEC 11801 Class E.
compatible with a PoE IP camera or PoE access point.

Check Stock

DEWALT 20V MAX Combo Kit, Compact 4-Tool (DCK420D2)

DCD780 20V MAX* 1/2″ drill/driver features two speed transmission(0-600/0-2000RPM)12345.
Dcf885 20V max* 1/4″ impact driver features 3 LED light ring withe 20 second delay to provide visibility without shadows.
Dcs381 20V max* reciprocating saw with keyless blade Clamp allows for quick blade change without touching blade or reciprocating shaft.
DCL040 20V max* LED work light delivers 110 Lumens of light output.
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.Power Tool Type:Cordless.

Check Stock

ZAISHANG Electric Car Jack 5T Hydraulic Floor Jack DC 12V Car Jack Kit with Electric Impact Wrench, Car Lift Emergency Tire Change

[Efficient Electric Car Jack Kit] 5 Ton electric car jack and electric impact wrench all in one tool case, meet all your needs of changing a tire..
[Fast and Convenient] Powered by cigarette lighter or car battery, fully auto, lift a car in one minute, save time and energy compare with manual car jack. Can also be connected to a 110v to 12 v DC power converter..
[Powerful Car Jack] This car jacks have a maximum lifting weight of 5 tons (11000 lbs) and a lifting height range of 6.1 to 17.7 inch. Suitable for most vehicles under 5 ton, Sedan, SUV, MPV, Truck etc..
[Electric Impact Wrench] This electric car jack kit includes a 1/2 inch portable electric impact wrench with two socket adapters with four sizes, matching most vehicles. Max torque 420 N.M. Helps quickly remove tire screws.
[Higher Stability and Safety] Car jack will automatically stop lifting after reaching the height limit and has self-locking function to protect car not fallen-down during use if cut-off power..

Check Stock

Hitachi DH28PFY 1-1/8 Inch SDS Plus Low Vibration Rotary Hammer, 3-Mode, VSR

Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
Featuring User Vibration Protection (UVP) technology to reduce the vibration transfer to the user.
drilling only, hammering only and hammer drilling for flexibility within a range of applications.
Increased durability achieved by incorporating an optimized hammering mechanism similar to Hitachi's larger hammer line.
Faster drilling speed achieved by combining the powerful motor and optimized hammering mechanism.
8 Amp motor that produces 2.5 ft/lbs of impact energy for powerful hammering with fast drilling.
0-4,300 full-load impact rate delivers forcible hammering.
Electronic variable speed control gives the tool a no-load RPM of between 0-1,110 and 0-780 in reverse.
Larger side mounted mode selector dial makes transitioning between modes simple and efficient, even when wearing gloves.
Angle adjustment position available on mode selector dial to change the chisel bit to different angles.

Check Stock