Reviews12 Dc Gear Motor

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Check Stock

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
✔Mounting: M6 screw holes, include 3 screws.
Main Material: Metal, Electronic component.
✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....

Check Stock

Peristaltic Pump Self‑Priming Lab Dosing Pump Large Flow Aquarium Drip Metering Pump Stainless Steel DC Motor Pump(24v)

【Low Noise】The wheel frame has ball bearings, quiet and long service life,with transparent PC removable pump head.
【Replaceable Tube Head】the experimental liquid distribution pump adopts the design screw clasp,detachable while keeping the conveying stable, which is convenient to replace the hose.
【Quantitative Delivery】The Quantitative Delivery Pump with imported peristaltic pump tube,which is resistant to corrosion acids and alkalis, and equipped with constant speed DC gear motor.
【Scope of Application】These small metering pumps have self-priming function and can be widely used in Lab Analytical, analytical testing instruments, ink delivery, ice cream extraction, beverage machine pumps, kitchen equipment warewashing equipment, laundry equipment.
【Specification】DC Motor Voltage: 12V / 24V (optional)--DC Motor Vurrent: 0.5-1.4A--Medium Flow: Flow direction of the pump depends on the positive and negative connections--Flow Range: 0-400ml/min--Pipe: Approx. 6.4 x 9.6mm / 0.3 x 0.4in (Inner Diameter x Outer Diameter)--Roller Type: Ball bearing.

Check Stock

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

Robust Aluminum Construction: The electric brushless dc motor kit is made of an aluminum alloy shell that withstand heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor, so you can easily switch the rotating gear..
Basic Parameters: This brushless go kart motor is strong and efficient. Input Voltage: 48V DC, Output Power: 2000W, Rated Current: 34A, Rated Speed: 4300 RPM, Maximum Speed: 5400 RPM, Maximum Current: 42A, Sprocket: T8F-11T. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi- purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
2000W Brushless Motor: DC electric go kart brushless motor adopts 100% copper core, with low operating noise and excellent speed regulation performance. The high-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..

Check Stock

CHANS TYC-40 Electric Synchronous Motor DC 12V 5RPM Shaft 35mm With Power Supply Input 100V-240V Output DC 12V For Ornamental Fiber Optic Christmas Tree

【Description:】It's a combination of an DC 12V motor and a input AC 100V-240V and output DC 12V power supply. Easy to install and easy to operate.....
【TYC-40 DC 12V Synchronous Motor Parameter:】 Voltage: 12V DC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner Diameter:....
【DC Power Supply Parameter:】 Input: AC 100-240V； Output: DC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
【Attention:】 1.The power adapter is an DC power supply,NOT suitable for AC motor. 2.Too high voltage will burn the motor and power supply.....
【Package Include: 】 1*TYC-40 12V DC 5RPM 35mm Synchronous motor； 1*DC Power Supply； 1*Module.

Check Stock

CHANCS Small Synchronous Motor TYC-40 12V 5RPM AC Inner-Shaft Length 74mm for Christmas Santa Halloween decoration 2PCS

This is a TYC-40 AC 12V 6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 74mm； Shaft Screw....
【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
【Package Content:】2PCS x Synchronous Motor.

Check Stock

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch (DWE4120)

9 amp AC/DC and 12,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection.
High-efficiency motor of the metal grinder provides low operating temps.
DEWALT angle grinder comes with One-Touch guard allowing for 360-degree rotation of the guard with a single action.
Slim ergonomic body design provides increased comfort in extended use applications.
Low-profile, jam-pot gear case increases durability and allows tool to fit into tight spaces.
Quick-Change wheel release allows tool-free wheel removal without need for a wrench.
2-position, removable side handle provides increased comfort and control.
5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories.

Check Stock

CHANCS TYZ42 Synchronous Motor AC 12V 5r/min CW/CCW Shaft 35mm TYC40 Gear Motor for Fiber Optic Christmas Ornamen …

This is a TYC-40 AC 12V CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Shaft Diameter: 4.5mm ； Shaft Length: 35mm； Shaft Screw Thread Inner....
【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
【Attention:】 The applicable voltage of this motor is AC 12V. USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
【Package Content:】1PC x Synchronous Motor；1PC X Screw ；1 PC X Wire Quick Connector.

Check Stock

X-BULL Winch-13500 lb Load Capacity Electric Winch Kit 12V Synthetic Rope,Waterproof IP67 Electric Winch with Hawse Fairlead with Wireless Handheld Remote and Corded Control Recovery

...neration of wireless remote control, with an IP67 waterproof grade, that can operate accurately from a distance regardless of terrain or weather. This versatile controller incorporates wired and wireless control (up to 35m).
[Electric Winch] The 13500 lb. winch powered by a 4.5kw/6.0hp output permanent magnet DC 12V motor. The new solenoid successfully implements the principles of heat insulation, toughness, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The connection between the clutch and the gear is strengthened by the new clutch system, making it more difficult to damage the clutch..
[Safety] For positive load control, there is a Power in & Power out motor. The powerful current can not only support the motor's operation smoothly and work within its rated current without any current impact, but also ensure the electric winch safety and your safety at all times. A 3 stage, 6.0 HP series wound motor comes with a 265:1 planetary gear ratio..
[Gear System] With its modern and effective 3 planetary gear system, free spooling clutch and ability to deliver strong traction under load and higher linear speed, this electric winch will prove to be an invaluable travel companion..

Check Stock

352338 RV Trailer Stabilizer Jack Motor High Speed Electric 138445 178562 162307 113407 K01285-C800 Koomaha

Electric RV Stabilizer Jack Motor for High Speed Power Models (Stabilizer Jack NOT Included).
OEM Part Number: 352338, 138445, 178562, 162307, 113407, K01285-C800, K01285C800, K01531A800, K01531-A800.
Power stabilizer jack motor make it faster, easier and simpler to get your 5th wheel RV or travel trailer up and running at the campsite camping. These units will save you a lot of time to enjoy your camping..
Specifications: 12V DC, 7 Amps, 53:1 Gear Ratio, 68 RPM, 50 IN/LBS Run Torque.

Check Stock

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch with No-Lock On (DWE4120N)

9 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection.
High-efficiency motor of this metal grinder provides low operating temps.
DEWALT angle grinder comes with One-Touch guard allowing for 360 degree rotation of the guard with a single action.
Slim, ergonomic body design provides increased comfort in extended use applications.
Low-profile, jam-pot gear case increases durability and allows tool to fit into tight spaces.
Quick-Change wheel release allows tool free wheel removal without need for a wrench.
2-position, removable side handle provides increased comfort and control.
5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories.

Check Stock