Reviews12 Volt Relay

12V 140A Dual Battery Isolator with Wiring Cable Kit -VSR Voltage Sensitive Relay Compatible with SUV Boat ATV UTV RV Truck-Double Battery Automatic Charger

• This product is designed for dual battery systems,suit for Most 12V Charging systems.surge protection,Automatically sensing voltage level of main battery.
• Voltage Sensitive Relay:Voltage Sensitive Relay:Cut in volt 13VDC,Cut out volt 12.8VDC.Ensure main battery is always charged and ready to run the vehicle . the Dual Battery Isolator can charge 2 Battery systems.
• Constructed with a weatherproof body IP65 and durable silver tipped contacts.
• Package include：1X 24” length Red Cable (with single connector)丨1x12” length Red Cable (with two connector)丨1x12” length black Cable (with two connector)丨2x SC16-8 Lugs丨1x blue insulated ring terminal丨2x orange heat shrink cover丨3x nut,2x washer,4x screws.
• 2 Year Warranty:For any reason, if you are not satisfied with your purchase, contact us directly. We offer a 1-year warranty, 100% satisfaction guarantee..

Winch Solenoid Relay 12V ATV Winch Solenoid Relay Contactor & Winch Rocker Switch Set Fits for ATV UTV Truck

• Fitment: for ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb.
• Replace Part NO. : 63070, 62135, 74900, 2875714, 70715.
• Specification: Voltage: 12V, Power: 250A, 1500-5000lbs Capacity.
• Applications: For 12 volt solenoid operated winches: for 4x4 vehicles, ATV's, UTV's, SUV's and Others.
• Package Includes: 1 x 12V Winch Solenoid Relay Contactor, 1 x Winch Contactor Rocker Thumb Switch, 1 Set of Mounting Brackets, 6 x Insulated Protecting Waterproof Caps.

RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input

• 1. Wireless Remote Control Kits – The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle..
• 2. Home Automation Security Relay – Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
• 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
• 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input....

ESUPPORT Car Heavy Duty Relay Switch 12V 30A SPST 4Pin Waterproof Electrical Automotive Pack of 5

ESUPPORT Car Heavy Duty Relay Switch 12V 30A SPDT 5Pin Waterproof Electrical Automotive Pack of 5

Aube by Honeywell TH140-28-01-B/U Hydronic Heating 7-Day Programmable Thermostat

• Compatible with hydronic floor heating and central heating.
• also compatible with electric heat applications using a relay (see accessories).
• 5-Ampere (resistive) 24-Volt, 120-Volt, 240-Volt R, W.
• Millivolt compatible, SPDT dry contact relay output.
• Remote input enables change of temperature modes by phone (Telephone controller required – Aube by Honeywell CT240).
• Low battery indicator gives 60-day warning to replace battery (2 ‘AA’ batteries required).
• Dimensions (height by width by depth): 4.9-Inch by 3.8-Inch by 1-Inch.

5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay

• Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
• 12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
• For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay.
• Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors.
• Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation.

S&S Cycle 550-0501 HI-4N Ignition Module

• Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
• 12 Volt Coil+5 PIN CDI BOX+4 PIN Regulator+Solenoid Relay+Spark plug.Fits ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more..
• This kit include 2-pin Male Plug Relay,Ignition Coil 135 Degree Elbow,12v 4-pin Voltage Regulator,5-pin CDI. (Does Not fit for GY6 engine)..
• The kit Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
• The items are the same as the pictures.5 Pins CDI module + 2Wire Ignition Coil + Starter Relay Solenoid + 4 PIN Voltage Regulator Rectifier + Spark Plug. Fits for: 50cc 70cc 90cc 110cc 125cc 140cc horizontal engine,Bikes & Quads,ATV, Buggy's..

Atublan 2 Pack Engine Electric Cooling Radiator Fan Thermostat Temperature Switch Relay Kit,175-185 Degree Temp Sensor Temperature Switch 40 Amp Sensor Relay kit

• New 175~185 degree electric fan thermostat relay switch kit , for your cooling system， 12V 40 Amp 4 Pin Relay & Pigtail,3/8" and 1/2" pipe thread....
• This kit includes everything you'll need to hook up to your fannding unit, relay switch, circuit breaker, terminals,wires and mounting screws..
• This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system ..
• Fit : 260 265 273 283 289 302 305 307 318 326 327 330 340 347 350 351C 351M 351W 352 360 361 383 390 396 400 400M 402 406 413 426W 427 428 429 440 454....
• Circuit breakers are manufactured with high requirements to greatly protect the safety of automotive system equipment. When the short circuit current....

Wolo (MCHWK-2) Air Horn Wiring Kit

• Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
• The kit is designed to easily hook-up a direct drive air horn to the vehicles factory horn system.
• Included in the kit is all that is required to install a direct drive air horn.
• wire harness with quick connect plug for the relay, terminals, in-line fuse, plastic wire ties and easy to follow instructions in English / Spanish.
• Ideal for any 12-volt car, motorcycle, truck, etc.

Wolo HWK-1 Air Horn Wiring Kit with Horn Button Switch

• Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
• The kit is designed for any 12-volt car, motorcycle, truck, etc.
• Included in the kit is all that is required to install a direct drive air horn.
• wire harness with quick connect plug for the relay, terminals, in-line....
• Use when new a horn switch is required, horn button switch included.