Reviews120v Welders

Eastwood Mig 175 Spool Gun Metal Connector Plastic Plug Push Pull Feeder Aluminum Welding Torch Gun 1 Lb Spool Of .035 Aluminum Wire

  • Spool Gun With Metal Plug Fits The Eastwood Mig135, Mig175, Mig250, And Mp250I Welders.
  • Comes Complete With A 1 Lbs Spool Of .035" Inch Aluminum Wire.
  • For Use On Machines With A Metal Plug On The Machine And Torch Lead..
  • Designed, Engineered And Tested To Eastwood Specifications.
  • Fits The Eastwood Mig175, Mig135 And Mig250 Welders.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

iMeshbean® Replacement Mig Welding Gun Stinger Torch Lead for Clarke 130EN 160EN 180EN Welder Parts 10 FT

  • This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
  • This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
Check Stock

Arrow Welding Magnets Set Arc Tig Mig Welding Magnetic Arrow Holder Multi-angle Metal Working Tools and Equipment Welding Accessories For Soldering Welding Assembly Installation (4PCS-9LBS)

  • 【High Gloss Enamel End Plates】Constructed of high quality stainless steel with a powder coated finish,these welders are anti-rust,corrosion-resistant and long lasting!High gloss enamel end plates are solidly riveted together for the strongest performance and won’t melt while welding!The red coating not only protect from rusting and from scratching the materials that you are working with,but also help you locate it easily,make your welding job more efficiently and precisely!.
  • 【Powerful Welding Magnet】Each package comes with 4 pieces heavy duty powerful angle magnets:can hold and support any ferrous metal objects up to 9 lbs!They provide strong magnetic pull strength for extreme sturdiness that is needed for welding,soldering,can be stuck solidly to any metal object while leaving your hands free to work more efficiently!Perfect gift for square and round tube welders,iron workers,professional welders,metal fabricators,art welders!.
  • 【Most Popular Uses of Angle Degree】Each magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion,and provides the most popular uses of angle degree:45,90,and 135-degree,allows you to work with different angles while welding,solderin....
Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Champion 3800-Watt Dual Fuel RV Ready Portable Generator with Electric Start (Pack of 1)

  • Dual Fuel - Runs on GAS or PROPANE straight out of the box. Engine type: 4-stroke, wheel diameter: 8.0 inches.
  • 4750 starting watts, 3800 running watts with up to 9 hours run time on a full tank of gas and up to 10.5 hours on a 20 lb. propane tank.
  • Powered by a reliable 224cc Champion engine with Touch Start, push-button electric start (battery included).Gasoline Starting Amps at 120V - 39.6A.Gasoline Running Amps at 120V - 31.7A.Propane Starting Amps at 120V - 35.6A.Propane Running Amps at 120V - 28.5A.
  • Frequency: 60 Hz. Outlets - 120V 30A RV, 120V 30A locking, two 120V 20A household outlets all secured by Volt Guard, protects your appliances from power surges.
  • Champion Support - 3 year limited warranty with FREE lifetime technical support. Refer instruction manual before use..
Check Stock

Tool Parts 25mm Diameter Wire Feed Drive Roller Roll Wheel .030'-.035' For Mig Welders For Clarke, SIP, MIG100/130/160/180/200

  • Package Includes: 1*Wire Feed Drive Roller | Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. |.
  • 25mm Diameter Wire Feed Drive Roller Roll Wheel .030"-.035" for Mig Welders.
  • Fits for many standard build MIG welders such as for Clarke, SIP, MIG100/130/160/180/200 etc..
  • Welder wire feed drive roller roll parts 0.8-0.9 Knurled-Groove .030"-.035".
Check Stock

Jackson Safety BH3 Auto Darkening Filter Welding Helmet with Balder Technology, Black, Universal Size, 46157

  • Design: Jackson Safety BH3 Auto darkening filter lens (ADF) offers best optical clarity, diffusion of light and angular dependence with a true 1/1/1/1 rating (DIN rating EN379).
  • Clean View: Variable shades from 9 to 13 to shield and protect eyes from radiant energy during weld.
  • This helmet has shade, sensitivity and delay adjustments for different tasks, enabling welders to enjoy enhanced visibility.
  • Features: This Jackson Safety Welding helmet is compatible with magnification filters and hard hats (sold separately) and includes 3 headgear adjustments for the ability to suit a variety of welders and tasks.
  • Certified: Meets ANSI/ISEA Z87.1+ standard for high mass impact protection and welding use, and DIN Plus requirements for production quality.
Check Stock

150 Amp MIG Gun Torch Replacement for Miller - 12 Feet Cable - Two-Pin Signal Connector

  • This MIG Welding Torch is a direct replacement for Miller M-10/M-100 and M-150 MIG guns. - Cable Length: 2 feet with 16 mm2 power conductor..
  • High-quality MIG gun, small and lightweight. Suitable for most farm, shop and home projects, light repairs , maintenance, and autobody work applications.
  • Comes with compatible with Miller/Hobart Plug and 2-PIN Signal Connector, (Please check Picture #2 for dimensions and Table in Picture #4 for a list of compatible welders).
  • 169715 gas Nozzle - 000 Series Contact Tip - 169716 Gas Diffuser.
  • List of compatible Miller and Hobart welders: SideKick, SideKick XL, Cricket XL, Millermatic 90, Millermatic Millermatic 130, Millermatic 130XP, Millermatic 135, Millermatic 140s, Millermatic 175, Millermatic180s, DVIs /211, Challenger, Challenger 172, Passport, Passport Plus, Hobart IronMan 210..
Check Stock

EcoNour 2 in 1 Car Steering Wheel Desk | Steering Wheel Tray for Laptop Car Mount with Pen Holder | Car Food Tray for Eating with Drinks Holder | Multipurpose Travel Car Accessories

  • 6-pin TIG Foot Control Pedal Amptrol for Lincoln K870 Welders.
  • TIG weld foot pedal upgrade with steel case and OEM quality components..
  • Fitted with 6-pin standard male plug and 25-ft cable for Lincoln TIG welders..
  • Excellent choice for upgrade or replacement.
  • Press to activate gas contactor and increase amperage.
  • release to turn off and activate afterflow..
Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

  • Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
  • Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
  • Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Check Stock