Reviews12mm Case Fans

Zalman SF140 RGB Computer Fan 140mm High Performance Cooling Fan for Gaming PC with Biomimetics 140mm

High Airflow Mesh Panel: The front mesh panels has small holes on the side and a clear front panel to allow for high volume of air to enter and exit....
White LED Fans Included: Case has 4x 120mm white LED fans pre-installed, including 3 in the front and 1 in the rear. Case can accommodate up to 6 fans....
A Smoky Acrylic Side Window: Clear side panel provides great view of white LED fans inside the case.
Convenient Interface: Power Control Button, Reset Button, Audio Ports, USB 2.0, USB 3.0, Fan Controller.
Maximum VGA Length: 360mm, PCI Expansion Slots: 7, Radiator Support: 120mm & 240mm.

Check Stock

CRJ Electronics DC Power Supply Plug to 2 x 3/4-Pin PC Fan Power Adapter Y Splitter Cable

This Cable Allows You To Power Two Case Fans With A DC Power Supply.
Specialized Fan Connectors Are Compatible With Both 3-Pin And 4-Pin PC Fans.
DC Power Supply Must Have A Plug Measuring 5.5mm x 2.1mm (Most Common).
Use A Variety Of DC Power Supplies To Control Fan Voltage (5V For Silent, 12V For Full Voltage).
Cable Length (Excluding Connectors): 12" / 30cm.

Check Stock

RROYJJ 4U Rackmount Server Case Chassis with Mini-SAS HD SFF-8643 12 Gb/s Interface 24 Hot-Swappable SATA/SAS Drive Bays (with Rails)

4U Server case with rails, which is support your cabinet depth for 600-1000MM (23.6''- 39.3'').
Six internal 12 Gb/s Mini-SAS HD SFF-8643 backplane.
3X120mm middle fans wall, 2 x 80 mm rear fans.
24x hot-swappable SATA (II or III) / SAS 12G drive bays.

Check Stock

KEYFANCLUB 80mm PWM Fan, PC Case Fans, High Performance Cooling Fan, 4-Pin, 4800 RPM

【80mm PWM Case fan】Dimensions: 80x80x25mm | 3.2 x 3.2 x 1.0inch | Voltage: DC 12V | Current: 0.5Amp | Power: 5.6Watt | Speed: 4800RPM | Airflow: 62CFM | Noise: 45dBA | Bearing: Sleeve | Long life with 35,000 Hrs..
【12v fan WIDELY APPLICATIONS】It is best for cooling the hottest & Narrow spaces | Circulating and exhausting stuffy air | Designed for projects that requires cooling or ventilation | Or as an replacement fan for various products | Allows the fans to be laid flat or stand upright..
【4-PIN PWM Terminal】The fan operate on 12vdc, Red wire connect to 12v and Black to GND or negative terminal. Yellow Wire is Signal for measuring speed. Blue Wire is PWM. Plus width modulation function with speed control..
【computer fan TWO WAY INSTALLATION】Blow warm air out of the case | Draw cool air into your case | Push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of the case | Rotation Direction: Counter-clockwise..
【12v computer fan COMPONENTS & WARRANT】Package included 80mm PWM FAN x1 | Fan Filter x1 | Shock Absorbing Nails x4 | 4-PIN extension power cable x1 | Molex to 4-pin power cable x1 | Chassis screws x4 | 12-month warranty and friendly customer service by KEYFANCLUB..

Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
electronic cooling fans and so on—Repair Replacement (1Pack).
Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
Connector: 2 Terminal Connector with 2pin-ph2.5.
compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.

Check Stock

Vetroo AL600 Mid-Tower ATX PC Case, Top 360mm Radiator Support, 3x120mm ARGB Fans, 3x120mm Regular Fans, Airflow Mesh White Gaming Case w/ Controller Hub

Pre-installed 6x 120mm Fans: Pre-installed 3x 120mm ARGB fans in the front and 3x 120mm regular fans in the rear and bottom provides the better airflow for the case and components..
Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better..
Three Airflow Channel: Pre-installed fans and two fan locations next to the motherboard can provide the great airflow for the CPU, GPU and case in the same time..
Controller Hub Included: You can customize RGB lighting and speed, create vivid, dynamic lighting and speed synchronized with the rest of your system..
Door Opening Design: Hinged and magnetic tempered glass side panle with hand provide convenient to remove without any tools..
Multi-Functional I/O Panel: You can directly control the lighting of ARGB fans via reset button if you connect the reset cable to the 2-Pin interface of controller..
Cable Management System: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner..

Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case Black

Build your legacy with the 7000D AIRFLOW, a full-tower case for your most ambitious PC builds – offering easy cable management, a spacious interior, and massive cooling potential with room for up to three simultaneous 360mm radiators..
A high-airflow optimized steel front panel delivers massive airflow to your system for maximum cooling..
The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 30mm of space behind the motherboard for all of your cables..
Includes three CORSAIR 140mm AirGuide fans and PWM fan repeater, utilizing anti-vortex vanes to concentrate airflow and enhance cooling..
A massive interior accommodates up to 12x 120mm or 7x 140mm cooling fans, and makes it possible to install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling..

Check Stock

Apevia ET62-RGB Electro 120mm Silent RGB Color Changing LED Fan with Remote Control, 28x LEDs & 8X Anti-Vibration Rubber Pads w/ 2 Magnetic RGB Color LED Strips (6+2-pk)

Apevia 120mm Silent Case Fan w/28x RGB Color Changing LED Lights (16 Outer Ring / 12 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side) & 2 x 12" Magnetic with Adhesive Tape Color Changing LED Strips.
Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
120mm x 120mm x 25mm. Fan Speed: 1350 +/- 10% RPM. Air Flow: 57.67 CFM. Low Noise Level: 24.7 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included. Comes with 2 Magnetic RGB Color LED Strips..
High quality control standards provide reliability and extended use of the fans..

Check Stock

Rosewill ATX Mid Tower Gaming PC Computer Case, Tempered Glass, Supports 360mm GPU/360mm AIO Liquid Cooling, 4 x 120mm RGB LED Pre-Installed Case Fans with Remote Control - CULLINAN MX RGB

The Coolest RGB LED Effect for Gaming Computer: The RGB gaming pc case with tempered glass demostrates the extraordinary RGB LED lighting effect with a remote controller. It allows user to adjust the RGB effects as solid LED color and Pre-programmed color modes (Rainbow, Gradient, Blade and Breath.) to show off your case..
Tempered Glass Design to Show Gaming Desktop: The gaming case with tempered glass is surrounded with 3 sides of tempered glass to display your gaming computer desktop. ROSEWILL CULLINAN MX is a high quality tempered glass mid tower ATX computer case which is surrouned from the front and 2 sides. That makes ROSEWILL CULLINAN MX an elegant and misterous computer gaming case..
Optimized Ventilation & Generous Expansion: With 4x pre-installed fans, including three 120 mm blue LED case fans in the front and one 120mm fan at the rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers are also allowed to install up to 170mm CPU Cooler and 360 mm Water-cooling Radiator in the front, 280 mm Liquid-cooling Radiator on top..
Quite Operation & Top-Mounted Multiple I/O Ports: With the 5mm tempered glasses all around and quiet operated fans, this gorgeous computer case aims to provide the quiest level of computer ....

Check Stock

Noctua NH-U12A, Premium CPU Cooler with High-Performance Quiet NF-A12x25 PWM Fans (120mm, Brown)

140mm class performance in 120mm size: 7 heatpipes, more surface area and a dual fan configuration with state-of-the-art NF-A12x25 fans allow the NH-U12A to rival many 140mm size coolers!.
Excellent case, RAM and PCIe compatibility: Fits most tower cases (158mm height), doesn’t overhang the RAM slots on LGA17xx, LGA1200 and AM4, doesn’t block the PCIe on most ATX and Micro-ATX motherboards..
Quiet, state-of-the-art NF-A12x25 120mm fans with Low-Noise Adaptors and PWM for automatic speed control: Full cooling performance under load, virtually silent at idle!.
Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700 (LGA17xx family) LGA1200, LGA115x, LGA2011, LGA2066 and AMD AM4 & AM5.
Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 12900K, 12700K, 12600K) and AMD Ryzen (e.g. 5800x3D, 5700X, 5600, 5500).

Check Stock

DeepCool CK560 WH Mid-Tower ATX Case, Airflow Front Panel, Full-Size Tempered Glass Window, 3X 120mm ARGB Fans, 1x 140mm Fan, E-ATX Motherboard Support, Front I/O USB Type-C, White

DeepCool CK560 WH PC case was designed following the latest PC component requirements to create an high-airflow gaming case without being too bulky which widely supports motherboards E-ATX, ATX, Micro-ATX and Mini-ITX.
CK560 WH features cross pattern on the front panel to maximize ventilation in the gaming case, quick-release design makes the front panel can be easily removed from the case and mounted back to the position with the magnets and bottom hooks.
High-compatibility CK560 WH ATX gaming case is compatible with 360mm AIO radiator on front or 280mm radiator on top, meanwhile, maximum 175mm CPU air cooler height limitation offers more choices for mighty dual-tower cooler with 140mm fans like DeepCool Assassin III.
DeepCool CK560 WH PC case has an efficient cooling system thanks to the pre-installed three front ARGB fans and a 140mm rear non-ARGB fan which allows ample airflow, CK560 WH supports up to 6pcs 120mm or 5pcs 140mm fans to build High-airflow wind channel in the gaming case.
DeepCool CK560 WH gaming case maximize potential with flexible configurations of any system setup, which supports PSU up to 160mm and 380mm GPUs in length, meanwhile, an adjustable built-in GPU bracket provides extra support extra weight for graphics card to avoid sag.

Check Stock