Reviews135u Bolt Kit

Dorman 03123 Front Manifold Bolt and Spring Kit - 3/8-16 x 1-3/4; M10-1.25 x 67mm Compatible with Select Toyota Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (73" Hubface, 58" Spring Center)

  • Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (95" Hubface, 80" Spring Center)

  • Rockwell American 3,500 lb Idler Axle- Running Gear Set - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

Rockwell American 3,500 lb Idler Trailer Axle Running Gear (Idler Axle W/Hubs, Bearings, Lugs & Nuts, Springs, U-Bolt Kit, Hanger kit. (89" Hubface, 74" Spring Center)

  • Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

ECOTRIC 6" Drop Axle Lift Kits Compatible with 2001.5-2020 EZGO Golf Cart Electric TXT Model

  • ...00psi). Replaces stock front axle with drop axle design!.
  • Lengthens wheelbase! Includes front and rear lift! No cutting or welding! Lift will accept 23" tires. IMPORTANT NOTE :Recently, we have received feedback from some customers, who said they did not receive the u-bolt. In fact, the u-bolt is not included in this item, and we do not sell this part. Please check our link description and pictures to verify this..
  • How to tell which lift kit you need: Where the steering column meets the floorboard, if you have a 3 bolt pattern, you need the older style (1994-2001.5) and if you have a 4 bolt pattern, you need the newer style (2001.5-2020). To buy the kits for 1994-2001.5 model, you can search for the ASIN B073W7VYVJ on Amazon..
  • PLEASE NOTE: THIS LIFT KITS CANNOT BE MOUNTED ON RXV MODELS. INSTRUCTION IS NOT INCLUDED! Professional installation is highly recommended! Search for {6" EZGO Lift Kit} on YouTube to get an Installation video..
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000).
  • Also includes the bushing set (PKCP3000BU) needed to make the pens.
  • Features a 3/8" single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2"..
  • Patent No. : US D682, 352 S. Pen blanks are not included. The realistic bolt action handle smoothly advances and retracts to securely lock the refill in place. Each pen kit includes a bolt action rifle clip, a replica 30 caliber cartridge, and a rose gold bullet tip..
Check Stock

Dye M3+ Paintball Marker - Battleship 2.0

  • FL-21 Bolt - The FL-21 Bolt System with an all-new 2-Stage Flex Face Bolt Tip sets a new standard for dependability and performance. Designed to operate across the widest range of extreme conditions, the FL-21 bolt provides unmatched performance without sacrificing reliability..
  • Flex Face Bolt Tip - The all-new 2-Stage Flex Face Bolt Tip within the FL-21 Bolt System maintains ideal bolt speed throughout the bolt cycle. A slow, soft first stage for optimal paint handling and a second stage with a speed boost to maximize valve lift operation..
  • Quick Release Bolt - The proven Quick Release Bolt Assembly is a robust steel gate system that securely hold the bolt in place. A simple push button system allows the user to remove and re-install the bolt kit in seconds. Standard maintenance has never been easier or more accessible..
  • SLAP ASA Slide Lock AirPort - DYE’s Slide Lock AirPort (SLAP) ASA is all-new for the M3+. The new enclosed SLAP design provides longterm dependability in a rugged and easy-to-operate package. The shielded design has no button to operate, no knob to turn and no lever to get snagged. All critical operations are protected by the Slide Lock Cover. Simply press and slide the lock cover back to engage the air supply with ease..
Check Stock

1/2' - Grade 100 Binder Chain - Grab Hooks - 20' Length

  • ...of valuable equipment every year — including trailers, motorcycles, bikes, and ATVs. Work with confidence, knowing that these chains and locks are backed by the 50 years of manufacturing expertise that only Vulcan can provide..
  • NEARLY IMPOSSIBLE TO DEFEAT OR CUT - The case hardened chain cannot be cut by hand with bolt cutters, and the lock includes a maximum security mechanism for ultimate protection. The square link shape of the chain does not allow bolt cutters to get a proper grip and the lock has been specially designed to be nearly impossible to grip with burglary tools. If you do not have the keys, you literally need an acetylene torch to defeat this chain and lock kit..
  • HIGHEST QUALITY MATERIALS AND CONSTRUCTION - The solid forged brass one-piece body padlock has an exclusive shape and design that cannot be defeated with any normal burglary tools. The case hardened security chain is hardened to 63 rc at 10% depth and 50 rc in the core, making it impossible to cut with bolt cutters or any other hand tool. No other lock and chain kit on the market is made of stronger materials or has a more difficult design for criminals to defeat..
  • ADDITIONAL PROTECTIVE FEATURES - The case hardened, square link security chain has an electro-galvanized finish fo....
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock