Reviews15kg Servo

4Pcs DS3218 20KG Waterproof Digital Servo with 25T Servo Arm,High Torque Full Metal Gear RC Steering Servo for 1:8 1:10 1:12 RC Toys Model TRX 4 Crawler Truck Mechanical Arm (Control Angel 180°)

  • ✨[ Widely Used ] : Suitable for 1/8, 1/10, 1/12 Scale Crawler Truck, RC Car,robot,Boat,mechanical arms, climbing cars and remote control models..
  • ✨[ High performance ] : High performance digital standard servo with high-precision metal gears with hard anodizing. Dual ball bearings and CNC aluminium middle Shell..
  • ✨[ DS3218MG 20KG Digital Servo ] : Maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
  • Dead band is 3μs. Pulse is 500us-2500us..
  • ✨[ Waterproof ] : It is drip-proof servo with waterproof rubber seals screw. But cannot be submerged in water..
  • ✨[Package List ]: 4 X DS3218MG Digital Servo (180°), 4 X 25T Servo Arm. 4 X Accessories..
Check Stock

4 Pack MG996R Metal Gear Torque Digital Servo with Arm Horn, MELIFE MG996 Robot Servo Motor for FUTABA Hitec Sanwa GWS JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

4sets DS3218 Update servo 20KG Full Metal Gear 25T Servo Arm Digital Servo Waterproof for Mechanical arm Fittings Baja Cars RC Cars,Control Angle 270

  • Large Torque: maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
  • High Quality:equipped with strong full metal gears,CNC aluminium middle Shell.
  • Upgraded Version: advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • Package Includes:4 X DS3218 Digital Servo 20KG,4 X 25T Servo Arm.
  • Note:This servo just waterproof, but it can not work underwater..
Check Stock

ANNIMOS Digital Servo 23.5KG/0.09S Stainless Steel Gear High Speed Waterproof Standard Baja Servos (270 Degrees)

  • New Model: Stainless Steel Gear Great Torque and Higher Speed servo, easy to install and it’s the best replacement for your machince.
  • Large torque maximum 23.5kg.cm and speed up to 0.09sec/60°(6.8V).
  • Power cord is longer up to 15.75inches(45cm),and also send with a 25T adjustable metal servo arm.
  • Compatible with 1/8 and 1/10 scale RC Crawler Car Truck Boat Airplane Helicopter Toy Robot Part, can be widely used in many diy projects..
  • Size:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).
Check Stock

ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)

  • 25KG servo - maximum torque can up to 25kg.cm (6.8V).
  • Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance.
  • High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life.
  • High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell,made of first-grade material.
  • Standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) 1/8 1/10 scale car.
Check Stock

2.4KG Micro Digital Servo Kit - High Torque 9g Metal Servo Waterproof Mini Steering Gear Standard Fast Speed Continuous Rotation for SCX24 RC Model & EMAX ES08MD II Standard 180 Degree

  • 2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve.
  • Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models.
  • Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test,which can withstand more than 1,000 impacts and increase your model's service life.
  • Stable performance: Compared with other steering gears, our upgraded high torque servo are equipped with high precision potentiometers and high-resolution digital chip, which can make your RC car respond quickly, enhance anti-interference ability, and quickly dissipate heat.
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°

  • DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
  • High torque steering servo for robot arm,boats,vehicles and remote control toys..
  • Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
  • Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
  • Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
  • when the input signal reaches 2500usec, the angle rotates to 270 degrees).
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

BETU 35KG Coreless High Torque RC Servo,Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn(270°)

  • 【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
  • Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6,1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
  • 【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

  • 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
  • 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
  • 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
  • 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Operating Speed : 0.17sec / 60 degrees (4.8V no load).
  • Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
  • 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check Stock