Reviews1mannequin
Onyehn IR Pyroelectric Infrared PIR Motion Sensor Detector Modules DC 2.7 to 12V(Pack of 6pcs)
- AM312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment..
- Low power consumption, small size, easy to install..
- Internal use of digital signal processing, pit interference strong..
- Repeatable trigger mode: that is, after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time)..
- Sensing range: ≤100 degree cone angle, 3-5 m.
- (required depending on the lens) Working temperature: -20 to + 60 ℃.
Onyehn IR Pyroelectric Infrared PIR Motion Sensor Detector Modules DC 2.7 to 12V(Pack of 12pcs)
- AM312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment..
- Low power consumption, small size, easy to install..
- Internal use of digital signal processing, pit interference strong..
- Repeatable trigger mode: that is, after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time)..
- Sensing range: ≤100 degree cone angle, 3-5 m.
- (required depending on the lens) Working temperature: -20 to + 60 ℃.
Loulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-300V AC with 3-Output 0-5V DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC513V).
Loulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-450V AC with 3-Output 4-20mA DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC520V).
DC Power Supply Variable, Adjustable Linear Regulated Power Supply 30V 10A Triple Output with 4 Digits Display,(00.01V, 0.001A), OCP/OVP, Voltage/Current Direct Display in Series/Parallel Mode
- Direct display of voltage and current in parallel and series mode.
- Channel 1 and channel 2 independent switch control.
- Set to save last output data and output state by hand.
- The upper limit and lower limit can be set within the rated range.
- Temperature controlled smart fan (more quiet).
- The four coding switch knobs with coarse and fine adjustments. Long press to enter into OCP/OVP mode.
- 3 year warranty, the key sound can be turned off.
DAOKI 5PACK piezoelectric Ceramic Vibration Sensor piezo 3.3V/5V Module Analog Controller Electronic Components Supplies Sensor for Arduino with Dupont Cable
- When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
- Working Voltage: 3.3V or 5V. Working Current: 1mA..
- Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
- This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration..
UNI-T MSO3000E Series Digital Oscilloscopes 150MHZ 2CH, 50MHz Built-in Waveform Generator
- Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
- Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
- Product 2: Quiet & Easy to use. Single output. 4 digits EBTN LCD display. 3 groups of one-key recall of stored data. Independent output switch. A low-noise power supply that is easily viewable from any angle..
- Product 2: Accurate. Output regulate resolution: 10mV (constant voltage) / 1mA (constant current). Adjustable voltage (0-32V). Output current 0-6.0A. Input voltage: 110V AC/220V AC, 50Hz~60Hz..
- UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit
- ...alog one can tell extent of vibration..
- When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
- Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output..
- Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
- Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!.
Precision 0-30V,0-30A Adjustable Switch Power Supply Digital Regulated Lab Grade (Input 110V)
- 【ACCURATE and HIGH PRECISION】Resolution 10mV/1mA, 4 digits display. Voltage accuracy 0.03%+10mV, current accuracy 0.1%+5mA.Very Easy setup with a rapid adjustment knob..
- 【WITH MANY UNIQUE FEATURES】Over current protection, CV and CC mode, no external attachment. CH1,CH2 output can be controlled independently.The two channels are automatically connected on series or parallel mode by the switch inside the machine..
- 【MULTI-PROTECTION FUNCTION 】Equipped with grounding wire, overheat protection, overvoltage protection, overcurrent protection and short circuit protection to ensure safety.
- after testing, it can maintain full load operation for more than 24 hours. The built-in smart cooling fan can reduce noise and effectively extend product life..
- 【HIGH-QUALITY MATERIALS】Using pure copper terminals, with good conductivity. High-quality cables are used internally to ensure the safe operation of the machine. Using high-quality hardware makes our products more precise..
- 【THREE-YEAR WARRANTY and QUALTIY CHECK】You will get Linear DC Power Supply*1,Power cord*1 ,Test line*3 , User Manual*1 by purchasing Linear DC power supply. We will inspect all DC power supply and accessories before shipment to ensure that the quality of the products received by ....
YFYIQI ETCR007AD AC DC Clamp Leakage Current Probe Sensor Transducer Clamp Meter Sensor with Output Connector BNC Plug Clamp CT Size 7mm
- ☀☀(1)ETCR007AD AC-DC Clamp Leakage Current Sensor, suitable for high-accuracy AC and DC current and leakage current on-line detection below 600V, range: AC/DC 0mA~60A, corresponding output AC/DC 0~600mV, jaw size is Φ7mm.
- ☀☀(2)The sensor adopts the clamp-shaped CT structure, which can be measured without disconnecting the measured circuit. The slim design of the clamp head is particularly suitable for the place where the cable is densely packed. The permalloy iron core is used, and the anti-interference ability is strong to ensure the accuracy of measurement. stability..
- ☀☀(3)Widely used in power, communications, meteorology, railways, automotive industry, oil fields, construction, measurement, research and teaching units, industrial and mining enterprises and other fields..
- ☀☀(4)Detection method: Clamp CT, non-contact measurement.
- ☀☀(5)Voltage output: Two-speed output: 0mA~6A, 100mV/A.
- Zero adjustment: Adjust ZERO key can be zero, eliminate the interference of geomagnetic field and external electric field.
Road Passion High Performance Oil Filter for HONDA CX500 1978-1984 EC EUROSPORT 1982-1984 CX500C CUSTOM 1979-1984 CX500D DELUXE 1979-1981
- O.D:2.719 in (69 mm)/I.D 0.75 in (19 mm)/Height:1.781 in (45 mm).
- Replace Parts Number:OEM Part Number: Honda 15412413000 15412413005 15412KEA003 15412KK9911 154A1413000 154A1MA6000.
- Replacement For Honda TRX680FA FourTrax Rincon 675 2020/ TRX680FA RINCON 680 2006-2019/ SXS700M4 PIONEER 675 /SXS700M2 PIONEER 675 2014-2020/ TRX500FPA FOURTRAX FOREMAN RUBICON W/EPS 500 2009 2011-2014/ TRX500FA FOREMAN RUBICON 499 2012-2014/ VT250 250 1983-1987.
- Replacement For HONDA MUV700 BIG RED 675 2010-2013/ TRX500FPA FOURTRAX FOREMAN 4X4 AT W/PS 500 2011-2012/ TRX500FPE FOREMAN 4X4 ES W/PS 500 2011/ TRX680FGA RINCON GPSCAPE 680 2006-2010/ TRX500FGA FOREMAN RUBICON GPSCAPE 500 2004-2008/ TRX400FGA RANCHER AT GPSCAPE 397 2004-2007/ TRX400FA RANCHER AT 400 2004-2007/ TRX650FGA RINCON GPSCAPE 650 2004-2005/ TRX650FA RINCON 644 2003-2005/ CB450DXK 450 1989-1992/ VTR250 INTERCEPTOR 250 1988-1990/ VT250 INTEGRA 250 1986-1988.
- High performance design for outstanding filtration,Strict quality control, Improve efficiency, extend service life,Synthetic blend media backed by a metal screen for uniform pleating, durability and optimum oil flow..
- Welcome To Contact With Us Before Or After Your Purchase. Our Warm & Responsible Custom....