Reviews1sliding Compound Miter Saw Blade

Milwaukee M18 18-Volt FUEL Lithium-Ion Cordless Brushless 10 in. Dual Bevel Sliding Compound Miter Saw Kit

  • Milwaukee POWERSTATE Brushless Motor provides more power, more run-time, and longer life. The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life..
  • REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity..
  • 5-3/4" Vertical Capacity (Base Board Against the Fence), 2x12 Horizontal Capacity (Laying Flat at 90°),5-1/4" Vertical Capacity Nested Crown Cam Locking Miter System with Adjustable Stainless Steel Miter Detent Plate and 11 detent locations, Dual Bevel with 9 detents and easy access bevel lever, Shadow Cut Line Indicator for quickly lining up cuts..
  • Top and Side Carrying handles for maximum portability Detent Override for Easily Setting Miter Locations Outside of Detents Up to 400 Cuts per Charge Tall Sliding / Removable Fences to Support Large Base and Crown Against The Fence, Easy Access Blade Change.
  • What's Included (1) M18 FUEL Dual Bevel Sliding Compound Miter Saw (2734-20), (2) M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack (48-11-1890), (1) M18 & M12 Rapid Charger (48-59-1808), (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp, (1) Dust Bag.
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

N126162 Miter Saw Dust Bag | table saw dust Collect Bag for Chop Saw Compatible with Dewalt DW715 DW716 DWS780 Type 1 DWS782 1Pack

  • 【Wide Compatibility】DW715 12" compound miter saw, DW DWS780 type 1, DWS782 sliding miter saw..
  • 【Note】Not fit: DW703, DW705, DW708 12" miter saw, DW713 10" saw, DW716 !!!.
  • 【Premium Quality】Table saw bag dust is made of healthy and environmentally friendly material, can be recycled many times.
  • 【Easy to Install】As long as you have the plastic receiver with the wire and the sawdust bag is attached to the receiver with the plastic clamp,....
  • 【Keep Cleaner】Captures sawdust in miter saw bag universal when you work.keep your shop and your work surface cleaner.Prevents dust from catching....
Check Stock

Metabo HPT Sliding Compound Miter Saw, 8-1/2-Inch Blade, Laser Marker, LED Light, 9.5 Amp Motor, Adjustable Pivot Fence, 5 Year Warranty (C8FSHES)

  • 8-1/2 Inch sliding compound miter saw with led and laser.
  • MOTOR: Powered by a 9.5 amp motor with a no-load speed of 5,500 RPM to smoothly handle the toughest cutting applications.
  • LED: Fully adjustable LED work light illuminates the table from any angle for bright visibility.
  • MITER ANGLE: Positive miter stops for quick adjustments to 15, 22.5, 31.6, and 45 degrees to the left and right.
  • BEVEL: Precise compound cuts with 48 Degree bevel angle left and 5 Degree bevel angle right.
  • LIGHTWEIGHT: Only 36.8lbs for lightweight portability.
  • LASER: Laser marker system for exact alignment and predictable blade placement.
  • SLIDE: Linear ball bearing slide system for superior accuracy and ease.
  • FENCE: Adjustable pivot fence broadly supports work piece, such as crown molding lying flat, for improved stability while cutting.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

Metabo HPT Sliding Compound Miter Saw | 10-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C10FSHCT

  • INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
  • POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
  • MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
  • COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.
Check Stock

Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

REEKON M1 Caliber Measuring Tool for Miter, Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials

  • A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen..
  • DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil..
  • COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe..
  • INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location..
  • QUICK AND EASY SETUP - Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials..
Check Stock

Astro Pneumatic Tool 936 Onyx Gear Driven Heavy Duty Air Saw

  • ✪ Cuts wood, brass & similar light materials with smooth, precise cuts.
  • no sanding needed! Cuts to a depth of 1/2 in. - ideal for frames and molding..
  • ✪ Make miter cuts from 0° to 45°.Fast 7800 rpm and a 3/8-Inch arbor. 2-Inch blade diameter and a .020 inch blade thickness..
  • ✪ This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials..
  • ✪ Has adjustable miter gauge, perfect for all your DIY projects! This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand..
  • ✪ This bench-top saw is so accurate that you might never have to file or sand ends! Compact size and portable.
  • easy to use for cutting metal, aluminum, copper, plastic and wood!.
Check Stock

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

VIYUKI Tile Cutter Saw Portable Wet Cutting Porcelain Tile Cutter Table Saw 7-Inch Wet Tile Saw

  • Tile Saw Wet Product Parameter: 120V/60Hz/5A/7" Blade x2, and easy-to-use perfect for any DIY home projects..
  • Wet Tile Saw 7 inch High-quality tool: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Professional Blade water cooling system: Tile saw blade 7-inch wet saw, keeps the blade cool and minimizes dust and debris. The panel of the machine is stainless steel to prevent rust..
  • Professional induction motor - supply generates up to 3,560 RPM..
  • Pack your satisfaction with the quality: Wet tile saw with a manufacturer warranty you can be sure you will get a quality tile saw.we will supply a new one with any flaw on the package or some quality problems..
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock