Reviews1w 445nm Laser Engraver

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • 【High Power Laser Engraver Machine】 100W whole machine electrical power, the pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
  •  【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light ....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

Comgrow Laser Rotary Roller, Laser Engraver Aluminum Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans, with 8mm-86mm Adjustment for DIY Laser Marking Different Size

  • 【Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. Work with COMGO Z1, ROBO CNC laser, Comgrow Laser Master, Creality 3D printer Ender 3 and most other brand laser engraver.Note the description in Figure 2.
  • 【Easy Setup and Use】Ready to use laser rotary roller after unpacking, Connect to laser engraving machine simply by replacing Y-axis terminal, no assembling needed, smaller size to better work with most laser engravers..
  • 【Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pen,bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting..
  • 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters..
  • 【One-year Warranty】 Comgrow rotary engraver includes a 12-month warranty to guarantee a reliable product in good working order.We are COMGROW manufacturer....
Check Stock

M140 M-Type Japan 2W+ 445nm Laser Diode 5.6mm TO-18

  • M140 M-Type Japan 445nm 5.6mm TO-18 Blue Laser Diode.
Check Stock

LIGHTWIN Blue Purple Laser Beams with 600 Lumens Flashlight for Pistols, 3 in1 Laser Light Combo, Tactical Laser Flashlight USB Rechargeable Laser Sight, Strobe & Steady Flashlight for Picatinny Rail

  • 【3 in 1 Laser Light Combo】: Laser class : IIIA.
  • wavelength of the purple laser: 380-470nm, blue laser 445-450nm. Up to 200m range (at night) with 600 Lumens flashlight. Robust anodized aircraft grade aluminum material makes the laser light firm and stable, can stand strong impacts and vibrations, IPX6 Waterproof and lightweight..
  • 【Quick USB Rechargeable】: LIGHTWIN purple and blue laser is bulit-in USB charging. Charging time is only 2 hours. The running times are: 6hr/laser, 1.2hr/light, 55min for both laser and flashlight. When the power is lower than 10%, the low power indicator light will be red, indicating that it’s time to charge in time now.
  • 【10 Sighting Modes + Strobe Function】: 3 in 1 purple blue laser flashlight combo has multiple 10 sighting modes : Purple LASER ONLY / BLUE LASER ONLY / Purple LASER LIGHT / BLUE LASER LIGHT /STEADY LIGHT/STROBE LIGHT / Purple LASER STROBE LIGHT / BLUE LASER STROBE LIGHT / Purple BLUE LASER STEADY LIGHT / Purple BLUE LASER STROBE LIGHT. Press the light button for 3 seconds to switch to strobe mode..
  • 【Windage & Elevation Adjustment】: Elevation(UP/D) adjustment has two adjustment holes, one is purple laser and the other is blue laser. For ....
Check Stock

ATEZR V35 Plus 160W Laser Engraver with KR PRO Chuck Rotary and KA Air Assist, 35W Output Power Laser Cutter, DIY Laser Engraver and Cutter Machine for Wood, Black Acrylic, Metal etc.

  • 【WORLD’S FIRST 35W LASER Engraver】Atezr V35 PLUS 35W Laser Engraver has 160W machine power and 34-36W laser power. This allows ATEZR V35 PLUS laser cutter to cut 18mm paulownia wood, 12mm black acrylic, and a maximum of 30mm paulownia wood, 40mm black acrylic in one go. Atezr V35 PLUS is the first 35W laser engraver on the market today, delivering unrivalled speed and precision for all your engraving needs. From wood to glass, Atezr V35 Plus can handle it all, creating deep, detailed engravings in no time. And, with faster processing times, you can complete engraving jobs quickly and efficiently, allowing you to take on more work and grow your business..
  • 【SUPER ACCURACY - HIGH-QUALITY WORKS】Atezr V35 PLUS Laser Engraver and Cutter Machine adopts spot coupling technology, the laser consists of six beams of diode lasers to achieve ultra-fine compression spots as small as 0.06 x 0.1 mm. You can achieve very sharp and precise lines and contours with Atezr V35 PLUS Laser Cutter, even when working with very complex designs. And a higher compression can provide faster processing times and reduce the likelihood of burning or scorching the material. Higher compression spots can also help reduce the amount o....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

NEJE Master 3500mW Laser Cutter Desktop CNC Laser Engraving Machine Mini Carver Laser Engraver Cutter DIY Logo Marker Printer APP Control for Windows, Mac, Android, Wood Cutting,Large Working Area

  • 【New Verision Laser engraving Machine】Updated master2 – 3.5w laser engraver machine with wireless control function.（Support Android mobile phones, Android tablets, iphone, ipad, iouch mobile control devices.Large engraving range: 150 * 150mm in NEJE Controller or 170mm x 170mm in GRBL Controller.high precision laser control circuit design, accuracy up to 0.075mm point distance, fast drawing, 2000*2000px ultra-clear printing effect, suitable for personal DIY or small batch engraving..
  • 【2 processors support 2 firmwares】NEJE Master 2 is equipped with 2 processors and can support 2 firmwares at the same time. When starting the software, the machine will automatically recognize the software and connect to it. In NEJE mode, NEJE Windows software works with NEJE ANdorid APP. This mode is suitable for beginners, which is simple and can help create high-quality works..
  • 【Full-featured & Powerful】Direct execution of BMP,JPG,PNG files and NEJE CLOUD provides thousands of engraving materials and resources to download and keep updating. Standard 450nm laser tube. The second version processor of master 2 is updated to GRBL1.1f. Control software update to benbox and LaserGRBL in GRBL mode (default Benbox firmware).
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • IMPORTANT: There need to update the firmware at first to work with the APP function. The laser engraver is without WiFi at first. Please check the video which below the product pictures named "Upgrade the firmware for the engraver and operate with APP". You can also contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser c....
Check Stock

Compact Laser Engraver machine, LaserPecker Pro Portable Engraver Lazer Engraving Etcher Desktop Laser Cutter Printer with Auto-focus stand for DIY Logo Design, Art Craft, Wood Paper Leather Food

  • Wide ApplicationLaserPecker pro engraver with small & lightweight design engraves on a wide variety of materials, like Paper-board, Fabric, Wood, Leather, Felt,Cloth,Fruit and more. The Easy Etcher can widely be used in Engraving, Carving, Etching, Cutting etc. NotePlastic : Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off.
  • In-App Editing & Preview Mode to Control Smartly & Work on nearly any surface and tiny objects In-App Editing Mode with many picture editing toors allow to create any patterns and words, modify the pictures or photos to engrave.
  • Preview Mode make users easily adjust the size, position, and the rotation angle of the pattern on the target surface by projecting a guide laser before engravingThis unique laser etcher can engrave on any surface or on tiny objects. Not for PC.
  • More Accurate PrecisionLaserPecker Pro has 0.15mm accurate light spot and high quality 405nm blue-violet laser, making accurate precision engraving.
  • Wirelessly bluethooth controlled by a smartphone.
  • 10,000 + lifespan built for long-term usage.
  • File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported The most compact and easy-to-use la....
Check Stock

NEJE Master 7000mW Laser Cutter Desktop CNC Laser Engraving Machine Mini Carver Laser Engraver Cutter DIY Logo Marker Printer APP Control for Windows, Mac, Android, Wood Cutting,Large Working Area

  • 【New Verision Laser engraving Machine】Updated master2 – 7w laser engraver machine with wireless control function.（Support Android mobile phones, Android tablets, iphone, ipad, iouch mobile control devices.Capable of high-speed deep engraving (0.5-1.5mm), suitable for marking patterns and logos, as well as cutting of wooden blocks with a thickness of 2.5-3mm.Engraving range: 150 * 150mm in NEJE Controller or 170mm x 170mm in GRBL Controller.
  • 【2 processors support 2 firmwares】NEJE Master 2 is equipped with 2 processors and can support 2 firmwares at the same time. When starting the software, the machine will automatically recognize the software and connect to it. In NEJE mode, NEJE Windows software works with NEJE ANdorid APP. This mode is suitable for beginners, which is simple and can help create high-quality works..
  • 【Full-featured & Powerful】Direct execution of BMP,JPG,PNG files and NEJE CLOUD provides thousands of engraving materials and resources to download and keep updating. Standard 450nm laser tube. The second processor of master 2 is updated to GRBL1.1f. Control software update to benbox and LaserGRBL in GRBL mode (default Benbox firmware).
  • 【Protection function】Built-in gyroscope protection device. When the lase....
Check Stock