Reviews2 0 Channel Amplifier Audio

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

  • 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
  • Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check Stock

Car Stereo Audio Speak Signal Hi-Low Converter for Auto Amp Subwoofer Amplifier CD Player High to Low Adapter

  • 【Car Audio Signal Hi-Low Converter】 It converters car stereo's high audio signal(R+, R-, L+, L-, Ground) to low RCA signal(left & right channel)..
  • 【Amplifier Modify Accessory】 This adapter is suitable for car stereos without RCA output to connect with the after-market amplifier. Although some amp has Hi-Low Convert function, we strongly recommend to have such an external converter to avoid the interference of the conversion inside the amp. Especially useful for CD radio stereo without Line Out port..
  • 【How to Connect】Easy to install: Green wire connect to the Left channel negative. Yellow wire connect to the Left channel positive. Gray wire connect to the Right channel negative. Purple wire connect to the Right channel positive. Black wire connect to Ground..
  • 【Product Dimensions】 Compact sized: 6.4 x 4.3 x2.5 cm/2.52 x 1.7 x 0.98 inch. The shell made by metal, reliable and strong..
  • 【Reliable Service】Ready to respond within a 24 hour time frame. 30-Day money back guarantee, 12 month replacement and lifetime Support..
Check Stock

MUSYSIC MU-D8500 Professional Amplifier – D Class Dual Channel Power Amp, High Performance 8500W 1U Chassis Amplifier with XLR & 1/4 inch Inputs for Home Speakers, Theatre, etc. with Audio Filtering

  • Take your audio experience to the next level with the MUSYSIC 2 Channel Amplifier. This high-performance amplifier is equipped with 3 Step audio filtering and low-voltage power on function to deliver outstanding sound quality, making it the perfect choice for music lovers, audiophiles, and professional audio engineers alike. Its frequency response ranges from 20Hz to 20KHz..
  • With UP TO 4800W PEAK, 2400W Program, 1200W RMS of clean output power @ 4ΩBridge AND 2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 2ΩStereo the [MU-D8500] Amplifier delivers powerful, distortion-free sound that will fill any room. Its Class D Protection Circuit helps to achieve tailored outputs. Whether you're listening to music, watching a movie, or playing a video game, you'll experience rich, detailed sound that will bring your audio to life..
  • The MUSYSIC MU-D8500 Amplifier is designed with versatility in mind. It features both XLR and 1/4-inch TRS inputs, and Speakon, Banana binding post outputs on each channel so you can easily connect a variety of audio sources, from turntables and CD players to smartphones and laptops. It has high and low pass filters for matching output to any loudspeaker. Comes with 5 Power Outputs based on the connections you make. (Specifications mentio....
Check Stock

Pyle 2-Channel Marine Amplifier Receiver - Waterproof and Weatherproof Audio Subwoofer for Boat Stereo Speaker & Other Watercraft - 400 Watt Power, Wired RCA, AUX and MP3 Audio Input Cable

  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade protection. It has a rugged construction and integrated power wiring harness to combat weather conditions as well.
  • POWERFUL 400 WATT: This amplifier receiver is powerful with its 400 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control.
  • 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP1B_0 is engineered as a 2-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input.
  • SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 10A fuse.
  • COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 4.13'' L x 3.35'' W x 1.38'' H and lightweight with only 1.89 lbs. The frequency response is 10Hz - 40kHz.
Check Stock

Car Audio Noise Isolator Filter Radio Noise Eliminator for Auto Truck Boat Speakers Amplifier Equalizer RCA Signal

  • 【Professional Audio Noise Isolator】Eliminates DC Current from the car audio RCA input. Eliminates ground loop noise from radio pre-amp outputs.....
  • 【Application Scenario】This audio noise isolator is especially useful when your car is equipped with a power amplifier or subwoofer. Also works on....
  • 【How to connect】Input Ports: white for right channel, red for left channel. Output Ports: white for right channel, red for left channel..
  • 【Product Dimensions】 6.4 x 4.3 x2.5 cm/2.52 x 1.7 x 0.98 inch. The shell made by metal, reliable and strong..
  • 【Reliable Service】Ready to respond within a 24 hour time frame. 30-Day money back guarantee, 12 month replacement and lifetime Support..
Check Stock

Pyramid PB918 2000 Watt MOSFET 2-Channel Car Audio Power Amplifier and Soundstorm AKS8 Complete 8 Gauge Car Audio Amplifier Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB918 2000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm AKS8 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The Pyramid PB918 2 channel car amplifier features a MAX power handling of 1000 watts at 2 channels or bridged into 1 channel at 2000 watts. Other features include fully adjustable electronic crossovers, a variable gain control, a heavy duty aluminum alloy heat sink, and a high level molex input.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 10.24'' W × 2.26'' H × 9.06'' L.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

CERWIN Vega H6E12DV 12" 2Ω 2400W Max / 500W RMS Dual Voilce Coil Vented Double Subwoofer Enclosure

  • HED Dual 12" Subwoofers in Factory-Tuned Vented Enclosure. car Amplifier, Car Audio,car speakers,Class, Amp, Watts, channel, car, amplifier, audio, sound, 4-channel, 2-channel, CAR subwoofer, monoblock, digital amplifier, 2 ohms, 4 ohms, 1 ohm, tweeters.
  • Dimensions: 34” X 15” X 16”(L X W X H) / 864 X 381 X 406 mm (L X W X H).
Check Stock

Lepy LP-2024A-HA LP-2024A+ Hi-Fi Audio Stereo Power Amplifier Car Amplifier 3A Power Supply

  • Power amplifier, lepy power amplifier with high fidelity and high efficiency, high power amplifier, subwoofer compensation for public advertising,....
  • If you have a radio, MP3 or other stereo system attached to your car or motorbike, get great sound on the move with this 2.1 Channel Hi-Fi amplifier....
  • For MP3, iPod, CD player input jack. Total harmonic distortion less than 0.4%, PROVIDING you perfect Audio Quality..
  • Capable to drive the audio signals from MP3, MP4, CD, Radio, DVD. Mini size and easy to install ,Fits perfectly for a car, motorcycle or boat.
  • Capable to drive the audio signals from MP3, MP4, CD, Radio, DVD. Mini size and easy to install ,Fits perfectly for a car, motorcycle or boat..
Check Stock

The Night Orion Fell A Survival Story

  • Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way....
  • Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier....
  • Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual....
  • Low/High Level Inputs – The multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. A low level (RCA) input is....
Check Stock

Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp Bundle with Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

  • Package Includes: (1) RockvilIe dB14 4000 Watt/2000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp. (1) RockvilIe RWK4CU 4 AWG Gauge 100% Copper....
  • Features of dB14: RockvilIe dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control....
  • Amplifier Kit Key Features of RWK4CU: RockvilIe RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables. 4 Gauge....
Check Stock