Reviews2 1 Audio Amplifiers

BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier - 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers

POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms.
CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry.
VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Check Stock

ZIOCOM Ground Loop Noise Isolator, RCA Audio Noise Filter for Car Audio/Home Stereo System, Portable and Lightweight, Ground Loop Isolator with Dual Channel(Black)

【Ground Loop Isolator】It is designed to help with a humming noise and or engine noise for radio's with no to connect to an amplifier that requires.
【Product Dimensions】Compact sized: 2.5*1.1*1.5inch.Working Voltage : AC 115/250V, 50/60Hz.
【Easy to install】The ground loop noise isolator is easy to install, plug and play when the wiring is correct, and isolate current noise..
【Scope of Application】Professional power filter for most of DC 12V devices. Effectively resolve the noise problem of audio. Widely used in car amplifiers, active subwoofers,computers, players,recording studios, conference room amplifiers,and other equipment..
【Package Contents】G07 audio noise filter,User Manual, 12-Month Product Replacement Warranty and 24 hour Customers Service..

Check Stock

BOSS Audio Systems PT1600 2 Channel Car Amplifier - 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable

Power – 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms.
Full Range – With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers.
Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Gain Control – The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
Specs – Dimensions 14” x 10 3” x 2 3” Weight 9 lbs.
– BOSS Audio Systems provides a powerful 6....

Check Stock

BOSS Audio Systems PM1500 Monoblock Car Amplifier - 1500 Watts 2/4 Ohm Stable Class A/B Mosfet Power Supply Great for Subwoofers

Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms.
Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.

Check Stock

Nobsound 1-IN-3-OUT XLR Audio Switch ; Balanced Audio Converter ; 3-Way Stereo Passive Audio Selector Switcher (MC103 Pro 3-Out)

MC103-Pro is a 3-way passive stereo audio splitter. It supports 1 stereo XLR inputs and 3 output. You can choose freely according to your audio device..
MC103 is designed for customers have several music equipment with XLR balanced output. You can conveniently use 1 audio source and 3 amplifiers to compare the performance of your amplifiers..
All aluminum shell to effectively avoid external noise and guarantee high-quality signal transmission.
Gold-plated XLR ports to ensure high reliability electric connection and minimize signal attenuation during its transmission..
Each channel has been connected with shielding wire to avoid interference from outside and make sure lossless signal transmission. Exquisite appearance with mini size.
can be easily placed and carried to enjoy the charming of music everywhere..
Passive audio switcher, no impact on the sound quality.
Silver-plated contacts make the knob very smooth.

Check Stock

Pump Boys and Dinettes

Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....

Check Stock

AudioSource Analog Amplifier, Stereo Power A Amplifier AMP100VS for Home Sound Systems

POWER YOUR SOUND SYSTEM: 2 Channels rated at 50 watts into 8 ohms. 60 watts RMS per channel at 4 ohms. Bridge Output: 150 Watts at 8 ohms..
HIGHLIGHTS: 5-Way Binding Posts. A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level and balance controls. Rear mounted treble and bass controls. Front panel diagnostic LEDS..
AUTOMATICALLY KNOWS WHEN TO TURN ON: This amplifier is audio sensing, meaning it automatically turns on when you start your system..
PERFECT FOR ANY HOME AUDIO SYSTEM: Our stereo amplifiers are great for home theaters and outdoor systems. Enjoy professional quality audio in the comfort of your own home..
SPECIALLY DESIGNED FOR MULTIPLE ROOMS: Our amplifiers allow you to deliver high quality sound and power to multiple rooms for the ultimate surround sound experience..

Check Stock

BOSS Audio Systems MODEL R1600M Car Amplifier - Model 1600W High Output Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great Amp for Subwoofers

POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms.
CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Check Stock

ONE Little Bear MC3 2-IN-2-OUT XLR Balanced/RCA Converter Audio Selector Splitter Box Passive Preamp XLR to RCA Switch

MC3 is a 3-IN-3-OUT (XLR*2 RCA*1) passive audio splitter / audio switch.
2 stereo XLR + 1 stereeo RCA inputs and 2 stereo XLR + 1 stereo RCA outputs.
Function 1: switch among sifferent sound sources or amplifiers and compare their sound performance.
Function 2: convert signal from balanced XLR to unbalanced RCA or from RCA to XLR.
Pure passive device without any impacts on sound quality. Mini size suits very well for desktop and home use..

Check Stock

BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

...tion Quality Fuse Holder with AGU Fuse.
Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect.
Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms.
Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs - Dimensions: 9.1” x 10.4” x 2.3”, Weight: 4.4 lbs..
Warranty - BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We st....

Check Stock

BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers

Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
Class A/B Topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Specs - Dimensions: 11.5 x 10.44 x 2.25, Weight 7.....

Check Stock