Reviews2 2 Inch Dual Module

NGFF(M.2) to USB 3.0 Adapter with Dual Nano SIM Card Slot for 3G/4G/5G Module

  • 1.Install the driver to find the module supplier you purchased. If you don’t have the module and SIM card, you will not be able to use the driver.
  • 2.USB 3.0 type A male to desktop or notebook PC,Supports USB 3.0 interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, 5G Mini Card to desktop PC.
  • 3.Supports system bus interface: USB 3.0.
  • 4.Supports dual NANO SIM card Push connector.
  • 5.Supports 3042/3052 type M.2 key B Card dimension.
Check Stock

2GB DDR3 PC-8500 1066MHz 204pin CL7 Micron Chip MT16JSF25664HZ-1G1F1 MT16JSF25664HZ1G1F1

  • DDR3 1066MHz PC3-8500 204-Pin Unbuffered Non ECC 1.5V CL7 Dual Rank 2Rx8 based 256x8 Module Size: 8GB KIT(2x4GB Modules) Guaranteed – Lifetime warranty from Purchase Date Free technical support.
  • Compatible with Apple Mac Book - 13 inch Late 2008, 13 inch Late 2009, 13 inch Mid 2010 - Mac Book5,1 MacBook6,1 Mac Book7,1.
  • Compatible with Apple Mac Book Pro -15 inch Late 2008, 17 inch Early 2009, 13 inch / 15 inch / 17 inch Mid 2009, 13 inch / 15 inch / 17 inch Mid 2010 - Mac Book Pro5,1 Mac Book Pro5,2 Mac Book Pro5,3 Mac Book Pro5,4 Mac Book Pro5,5 Mac Book Pro6,1 Mac Book Pro6,2 Mac Book Pro7,1.
  • Compatible with Apple iMac - 20 inch/ 24 inch Early 2009, 20 inch Mid 2009, 21.5 inch / 27 inch Late 2009 - iMac9,1 iMac10,1 iMac11,1.
  • Compatible with Apple Mac Mini - Early 2009, Late 2009, Mid 2010 - MacMini3,1 MacMini4,1.
Check Stock

5PCS 0.96 Inch OLED Display Module, PEMENOL 28 x 64 Pixel I2C IIC Serial 1 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and ESP8266（White Light）

  • This is a new 2.8 inch serial SPI color display module with touch function.
  • Designed with one socket for memory card.
  • With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface.
  • 5V compatible, use with 3.3V or 5V logic.
Check Stock

Honeywell TH6320R1004 Wireless FocusPro Thermostat

  • Wireless programmable thermostat powered by RedLink.
  • 5-1-1 Programming - Programming for the weekdays, Saturday and Sunday.
  • 5-2 Programming - Programming for weekdays and weekends.
  • Can display outdoor temperature and humidity.
  • Dual Fuel enabled - requires THM5320R1000 Equipment Interface Module and C7089R1013 Wireless Outdoor Sensor (sold separately).
  • Requires (TrueZONE system - not included): HZ432 or HZ322 TrueZONE panel.
  • Requires (Non-zoned system - not included): THM5320R1000 Equipment Interface Module.
  • 1 year battery life and 2 month low battery warning.
Check Stock

Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater

  • This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base..
  • The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller..
  • IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions..
  • Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full spe....
Check Stock

Adamanta 32GB (2x16GB) Memory Upgrade for 2020 Apple iMac 27" w/Retina 5K Display, 2019 Apple iMac 27" w/Retina 5K Display, 2018 Apple Mac Mini DDR4 2666Mhz PC4-21300 SODIMM 2Rx8 CL19 1.2v DRAM RAM

  • 32GB ( 2x16GB ) DDR4 2666 MHz Non-Parity/Non-ECC Unbuffered SODIMM Memory 260 pin Dual Rank Module..
  • Memory Upgrade Compatible with 2020 27 inch iMac w/ Retina 5K Display model ID: 20,1 20,2 (i5 3.1GHz, i5 3.3GHz, i7 3.8GHz, i9 3.6GHz). Models: MXWT2LL/A, MXWU2LL/A, MXWV2LL/A.
  • Memory Upgrade Compatible with Early 2019 27-inch iMac w/ Retina 5K Display model ID: 19,1 (i5 3.0GHz, i5 3.1GHz, i5 3.7GHz, i9 3.6GHz).
  • Memory Upgrade Compatible with Late 2018 Mac Mini model ID: Macmini 8,1 (i3 3.6GHz, i5 3.0GHz, i7 3.2GHz).
  • Every module is backed by a limited lifetime warranty. We always have hundreds in stock! Every single module is fully tested by the manufacturer. Our experienced technicians can verify if these parts will work for you with free technical support..
Check Stock

Garbage Disposal Air Switch Kit Dual Outlet Sink Top Waste Disposal Long Stainless Steel Brush Nickel On/Off Air Button Food and Waste Disposals Part by Etoolcity

  • Upgrade Version: We redefined the air switch, made of real stainless steel, never worry fade away and fall off, more elasticity and flexiable.
  • Two Power Module Installation Methods: You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong.
  • Unique Dual Outlet Design: The 'B' outlet using for the garbage disposal is controlled by the air button.
  • The 'A' outlet using for other devices like hot water dispenser or dishwasher is directly powered.
  • Easy To Installe Air Button: Just drill a not less then 1-1/4 diameter hole in the sink, counter-top or front of the sink cabinet, place the rubber gasket between the push button and the top of the sink counter. Tighten the plastic nut under the sink counter to ensure a watertight seal.
  • Air switch kit includes: Dual-outlet power module, 5ft long air tube, 2.5ft power cable, long(2.7'') stainless steel air switch brushed nickel button, set screws and strong nano-markless hook sticker.
Check Stock

Ableconn MPEX-M2WL Mini PCIe Adapter with M.2 Key E Slot - Support PCIe and USB Based M.2 E Key and A-E Key Module for Mini PCI Express - Work for WiFi & Bluetooth M2 Module

  • Convert a USB based or PCIe based M.2 wireless module to be used in an IPC mPCIe slot.
  • Support M.2 E Key and A-E Key WiFi + Bluetooth Wireless Module.
  • Support M.2 wireless module that is USB base, PCIe base, or Dual USB+PCIe mode.
  • No driver installation is required. 100% OS-transparent hardware bridge converter to support Windows, MAC and Linux..
Check Stock

Honeywell YTH5320R1025 Wireless Non-Programmable FocusPRO Kit with Wireless Adapter Allows to be Used with TrueZONE Panel

  • WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
  • EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • POWERFUL 10W DUAL LASER MODULE – The LASER TREE laser module has 80W machine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving ....
Check Stock

Timetec 16GB KIT(4x4GB) Compatible for Apple DDR3 1333MHz PC3-10600 CL9 for iMac (Mid 2010 27 inch, Mid 2011 21.5/27 inch) SODIMM Memory Module MAC RAM Upgrade for iMac 11,3 / iMac 12,1 / iMac 12, 2

  • DDR3 1333MHz PC3-10600 204 Pin Unbuffered Non-ECC 1.5V CL9 Dual Rank 2Rx8 based 256×8 Module Size: 16GB KIT(4x4GB Modules) Package: 4x4GB.
  • Compatible for Apple iMac – 21.5 inch/ 27 inch Mid 2010, 21.5 inch / 27 inch Mid 2011- iMac11,2 iMac11,3 iMac12,1 iMac12,2.
  • Model Number: A1311 A1312 – Part Number(s): MC508LL/A, MC509LL/A, MC511LL/A, MC784LL/A, MC510LL/A, MC309LL/A, MC812LL/A, MC813LL/A, MC814LL/A, MD063LL/A, BTO/CTO.
  • Supports CPU Processors: 3.06 GHz Core i3, 3.2 GHz Core i3, 2.5 GHz Core i5, 2.7 GHz Core i5, 2.8 GHz Core i5, 3.1 GHz Core i5, 3.6 GHz Core i5, 2.8 GHz Core i7, 2.93 GHz Core i7, 3.4 GHz Core i7.
  • Guaranteed Lifetime warranty from Purchase Date and Free technical support based on United States.
Check Stock