Reviews2 5 Inches Sata

FebSmart PCIE to 6-Ports SATA 3.0 6Gbps Max Speed Expansion Card for PCs, Servers, NAS-Plug and Play on Windows, MAC OS, Linux System-ASMedia ASM1166 Non-Raid PCIE 3.0 SATA Controller (FS-S6-Pro)

  • 1.The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 6X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
  • 2.Select the ASMedia ASM1166 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X4 interface provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64), Windows XP, Vista, 7, 8.x, 10 (32/64bit), MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherbaord PCIE X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 6X max SATA interface power connector.3. Users must make sure PCs/Motherboards have at least one PCIE X16....
Check Stock

FebSmart PCIE3.0 to 4-Ports 6Gbps SATA 3.0 Expansion Card for PCs, Servers, NAS, MAC Pros-Plug and Play on Windows, MAC OS, Linux System-ASMedia ASM1064 Non-Raid PCIE 3.0 SATA Controller (FS-S4-Pro)

  • 1.The FS-S4-Pro is a PCI express 3.0 X1 interface to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
  • 2.Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019,2016,2012R2,2012,2008R2,2008,2003R2,2003(32/64), Windows XP, Vista,7,8.x,10(32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD.3. Users must make sure PCs/Motherboards have at least one PCIE slot before purchase.4. Slim ....
Check Stock

Startech.com Usb3sdockdd Usb 3.0 Laptop Docking Station

  • BROAD DRIVE COMPATIBILITY: Standalone 1-to-1 duplicator and eraser for M.2 PCIe NVMe (M-Key), M.2 SATA AHCI (B+M-Key), SATA 2.5/3.5" drives.
  • Duplicate between M.2 NVMe/SATA & 2.5/3.5" SATA drive interfaces.
  • CONFIGURABLE DUPLICATION MODES: Solid State Drive (SSD)/Hard Disk Drive (HDD) cloner supports multiple modes: System & File, All Partitions, Whole Drive & Percentage Duplication.
  • Adjustable Host Protected Area (HPA) settings to include/exclude partitions.
  • CONFIGURABLE ERASE MODES: Drive wiper w/ 5 erase modes: Quick Erase, Full Erase (Single & 3-Pass), Secure Erase (Clear/Purge, meets NIST SP 800-88 Rev 1).
  • Upgradeable firmware complies with future DOD & Government standards.
  • EASY TO USE: External drive duplicator/sanitizer has intuitive button-operated interface w/ full on-screen display (OSD) for increased manageability.
  • Menu incl: Error Reporting, Present Drive Info.
  • LED indicators (Power/Activity, Status, Error).
  • WIDE COMPATIBILITY: M.2 NVMe duplicator supports M.2 NGFF SSDs sized 2230/2242/2260/2280/22110.
  • M.2 NVMe & M2 SATA drives incl. Samsung 850/860/870/950/960/970, WD, HP, & Intel.
  • Supports IDE/mSATA using SAT2IDEADP/SAT32MSAT25....
Check Stock

COMeap HDD SATA Power Cable Right-Angle SATA 15 Pin x2 to Mini 6 Pin ATX Adapter for Dell Inspiron 3653 3650 Series Compatible Part No. GP2JM 14.5-inch(37cm)

  • ... mini 6 pin port, not standard 6 pin port.), 15 Pin SATA port plugs into the hard drive.
  • Compatibility』Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm), Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • ( Please purchase the mini 8 pin to SATA adapter for DELL OptiPlex series, the link is https://www.amazon.com/dp/B07Z2GBR25 ).).
Check Stock

High Point RocketRAID 640L Internal 4 SATA Port PCI-Express 2.0 x4 SATA 6Gb/s RAID Controller -Lite Version

  • Bios boot to RAID with point-to-point connectivity or through port Multiplier.
  • Quick, background or foreground initialization.
  • Oce/orlm (online capacity expansion/online RAID level Migration).
  • Supports up to 4 SATA 6Gb/s and 3Gb/s HDD/SSD.
  • Driver support for Microsoft Windows 7, 2008, Vista, and Linux distributions.
Check Stock

COMeap Motherboard ATX Mini 8 Pin to 2X Right-Angle 15 Pin SATA Hard Drive HDD Power Adapter Cable for Dell OptiPlex Series 3020 5040 7020 9020 14.5-inch(37cm)

  • 『Connectors』Connector A: ATX 12V mini 8 pin (NOTE: not standard 8 pin), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and a ssd).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm).
  • 『Note』This cable was only designed for some types of DELL OptiPlex series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • 『Compatibility』Compatible with DELL OptiPlex series such as 3020/3040/5040/7020/7040/9020 MT, T1700MT.
  • 『Mini 8P – 2x Right-Angle SATA』Mini 8 Pin port plugs into the motherboard (NOTE: It is mini 8 pin port, not standard 8 pin port.), 15 Pin SATA port plugs into the hard drive.
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
  • Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
  • Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
  • Cost-effective 2-pack provides a spare power cable for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
  • Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Check Stock

2 Port eSATA3.0 or 2 Port SATA3.0 Non-Raid Controller Card, X1, with 2 SATA Cable, Support SSD and HDD

  • Add 2 eSATA III or 2 SATA III 6Gbps ports to a computer through a PCI Express slot (only one of them can be used, the default SATA interface is valid) to improve your system performance and expand overall internal storage. (NO-Support Raid)..
  • The 4 ports SATA controller base on ASMedia ASM1061 chip, more stable and wider compatible..
  • Compliant with SATA3.0 standards, backward compatible with SATA1.0 and SATA2.0. Support PCIe1.0, 2.0, 3.0 protocol on motherbaord PCIe X1, X2, X4, X8, X16 slot..
  • Full height and low profile bracket included..
  • Supports Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019, RHEL/CentOS 6/7/8, Ubuntu 16/18/20/21, SUES 11/12/15, VMware ESXi 5/6/7, Linux..
Check Stock

M.2 NVME SATA SSD Enclosure Adapter Tool-Free, RTL9210B Chips, USB C 3.1 Gen 2 10Gbps NVME, 6Gbps SATA PCIe M-Key(B+M Key), Support UASP Trim for SSD Size 2230/2242/2260/2280

  • 【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1, perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of your SSD, USB Port type, your computer performance, and NVMe /SATA media used etc.One HD movie transfer only takes 2-5 seconds..
  • 【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you use m.2 solid state drive SSD, you need to format the disk. It will Safe for your Memory data..
  • 【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included. NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Applicable to sizes 2230/2242 / 2260 / 2280 solid state drivers..
  • 【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed. Supports Plug & Play and Hot-Swapping. Fits storage up to 2TB(no included)..
  • 【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excelle....
Check Stock

Supermicro SuperServer 5018D-FN8T Xeon D Mini 1U Rackmount,10GbE LAN SFP+ IPMI

  • Intel Xeon D-1518 2.2 GHz Quad Core Processor.
  • Supports up to 128GB DDR4 ECC RDIMM, Supports up to 64GB DDR4 ECC/non-ECC UDIMM, DIMM Sizes: 32GB, 16GB, 8GB, 4GB.
  • Supports 4x SATA3 6Gb/s drives, 1x M.2 (2242/2280/22110, PCI or SATA MUX), 1x mSATA (SATA MUX), and SATA DOM.
  • 2x 10Gb SFP+ Ports (Intel D-1500 SoC), 4x 1GbE RJ45 (Intel i350-AM2), 2x 1GbE RJ45 (Intel I210), 1x IPMI RJ45 (Realtek RTL8211F PHY).
  • Case Dimensions: 437mm x 249mm x 43mm, 17.2" x 9.8" x 1.7" (in inches).
Check Stock

Optiarc 1 to 5 24X Burner M-Disc Support CD DVD Duplicator - Standalone Copier Duplication Tower OPT-S5T-DVD-BK

  • BROAD DRIVE COMPATIBILITY: Standalone 1-to-1 duplicator and eraser for M.2 PCIe NVMe (M-Key), M.2 SATA AHCI (B+M-Key), SATA 2.5/3.5" drives.
  • Duplicate between M.2 NVMe/SATA & 2.5/3.5" SATA drive interfaces.
  • CONFIGURABLE DUPLICATION MODES: Solid State Drive (SSD)/Hard Disk Drive (HDD) cloner supports multiple modes: System & File, All Partitions, Whole Drive & Percentage Duplication.
  • Adjustable Host Protected Area (HPA) settings to include/exclude partitions.
  • CONFIGURABLE ERASE MODES: Drive wiper w/ 5 erase modes: Quick Erase, Full Erase (Single & 3-Pass), Secure Erase (Clear/Purge, meets NIST SP 800-88 Rev 1).
  • Upgradeable firmware complies with future DOD & Government standards.
  • EASY TO USE: External drive duplicator/sanitizer has intuitive button-operated interface w/ full on-screen display (OSD) for increased manageability.
  • Menu incl: Error Reporting, Present Drive Info.
  • LED indicators (Power/Activity, Status, Error).
  • WIDE COMPATIBILITY: M.2 NVMe duplicator supports M.2 NGFF SSDs sized 2230/2242/2260/2280/22110.
  • M.2 NVMe & M2 SATA drives incl. Samsung 850/860/870/950/960/970, WD, HP, & Intel.
  • Supports IDE/mSATA using SAT2IDEADP/SAT32MSAT25....
Check Stock