Reviews2 5 inch Hdd Cases

ORICO 5 Bay Docking with Clone USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD/SSD Max Support 5X 16TB [6558US3-C]

  • 【80TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 80TB (5x 16TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
  • 【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
  • 【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
  • 【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable ....
Check Stock

CY Dual Power 12V and 5V eSATAp Power ESATA USB 2.0 Combo to 22Pin SATA Cable for 2.5' 3.5' Hard Disk Drive 50cm

  • Can connect your 2.5 or 3.5 SATA Hard Disk Drive ( HDD) externally to any free Power Over eSATA (eSATAp) port..
  • Does not require any additional power supply for a 2.5 or 3.5 HDD. Power Over eSATA port combines eSATA and USB and enables, by help of the two gold contacts, a power supply of 12 V..
  • Can be connected to a 5 V eSATAp port, so that you will get only the required 5 V for running your 2.5 HDD. (Please make sure your power esata port support 12V if you want connect the 3.5" HDD directly).
  • System requirements : Notebook or PC with a free Power Over eSATA Port 5 V or 12 V.
  • Dual Power 12V and 5V Power Over eSATA (eSATAp) USB 2.0 combo to 22Pin SATA cable 0.5 m.
Check Stock

Thermaltake View 71 RGB 4-Sided Tempered Glass Vertical GPU Modular E-ATX Gaming Full Tower Computer Case CA-1I7-00F1WN-01

  • 4 SIDED GLASS VIEWING PROTECTION: 5mm thick tempered glass panels spaced from the chassis for optimal airflow.
  • Top, Front, and Swing Door Design on Left and Right.
  • 3 WAY RADIATOR VIEW : Supporting 3 way radiator fitments.
  • Top, Front or Vertical View mounting on Motherboard Tray.
  • VERTICAL GPU: Includes GPU Float bracket allows vertical mounting options for 2.5 slot GPU solutions.
  • COOL WITH RGB 3 Riing 14 RGB LED Fans (140mm) providing excellent cooling performance with RGB lighting.
  • SUPPORT UP TO 10 HDD 2.5 inches/3.5 inches x 4 with HDD Rack + 3.5 inches x 3 / 2.5 inches x 6 behind M/B Tray.
  • Supports Mini ITX, Micro ATX, ATX, and E ATX Motherboard.
  • I/O PORT USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1.
  • OUTSTANDING EXPANSION Max CPU Cooler Height 190mm / Max VGA Length 310mm (With HDD Rack) 410mm (Without HDD Rack) / Max PSU Length 220mm (Without Bottom Fan).
  • DIMENSION 23.3 inches x 10.8 inches x 22.7 inches / 42.1 pounds.
Check Stock

Acogedor SATA Interface Network Adapter, PS2 Network Adapter HDD Adapter FMCB Version 1.953 Memory Card 64MB Free McBoot 2.5inch 3.5inch Hard Disk Adapter

  • ...Boot. with this adapter you can connect SATA hard disk (no IDE) directly to the console and load programs without discs to play games from HDD..
  • COMPATIBLE DEVICES: For PS2 HDD adapter, the HDD adapter is compatible with the SATA network of the for PS2 console. The network adapter can support up to 2TB SATA HDD (2.5 inch and 3.5 inch). 2TB SATA HDD connector plug socket cover with HASL process..
  • ANTI INTERFERENCE: SATA HDD interface network SATA interface network adapter can improve the anti interference ability and reduce the interference to other devices. And connect SATA HDD (no IDE) to your console and use the loader to play HDD games without discs..
  • HDD ADAPTER DESCRIPTION: SATA interface HDD adapter uses an advanced master control chip. You can connect SATA HDD (without IDE) to your console and use the loader to play HDD games without discs, giving you a different experience..
Check Stock

HornetTek USB 3.0 Dual Bay 2.5" HDD / SDD Enclosure w/RAID 0 & RAID 1

  • Support dual bay 2.5″ (Notebook Size HDD) SATA I / II / III HDD / SSD *****This unit does not support desktop size 3.5″ HDD*****.
  • SATA interface support SATAIII specification up to 6Gbps / USB 3.0 interface operates at Super Speed up to 5Gbps.
  • HDD configuration support : JBOD/ Normal/ Raid 0/ Raid 1 / 4 LED indicator for Power ON/Standby and two HDD activities.
  • Compact Design 5.25” x 2.05” x 3.55” with Aluminum case and 4CM cooling fan / Aluminum housing with metal internal hard drive tray.
  • 1 Year Warranty from Manufacturer – HornetTek Customer Service Number: (855) 594-3816.
Check Stock

Warmstor SATA to USB 3.0 Adapter Cable for 2.5 / 3.5 Hard Disk HDD SSD USB to SATA III Hard Drive Converter Cord with 12V 2A Power Adapter Compatible with Windows 10/8.1/8/7 /Vista/XP,Mac OS

  • ★UPGRADED USB 3.0 TO SATA III ADAPTER: 2.5 /3.5inch: Allows you to connect any standard 2.5" or 3.5" SATA HDD mobile enclosure to your....
  • ★MAX 5Gbps SUPER TRANSFER SPEED: Supports data transfer up to 5 Gbps. SAVE TIME WITH UASP: This sata to usb adapter supports UASP Technology, which....
  • ★PLUG & PLAY: This adapter cable help you easily transfer data with hard drives without installing the SSD/HDD into an computer case. Plug-and-play....
  • ★WIDE COMPATIBILITY: It widely support PS4, Xbox, Windows 10/8.1/8/7/Vista/XP, Mac OS. Supports 2.5/3.5 '' SATA HDD SSD up to max 12TB. (NOTE: It....
  • ★WARM TIP: This USB 3.0 to SATA 15+7 pin connector cable is equipped with a DC-Jack port, which could supply enough power to spin up an HDD, With....
Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

  • ...and set up by dialing combination according to your needs..
  • LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
  • 12 MONTH QUALITY ASSURANCE WITH LIFETIME TECHNICAL SUPPORT - All ORICO products purchased through Amazon include an 12-month quality assurance and lifetime technical ....
Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

  • Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
  • X825 Case,please refer to ASIN: B093WYWVRX.
  • Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
  • OS compatiable: All Raspberry Pi operating systems.
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
  • Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
  • Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
Check Stock

Thermaltake S300 Tempered Glass Edition ATX Mid-Tower Computer Case with 120mm Rear Fan Pre-Installed CA-1P5-00M1WN-00

  • [4mm THICK TEMPERED GLASS PANEL] - Tool free door lock design, which s durability and style.
  • [BUILT-IN WINDOWED POWER COVER] - Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
  • [GPU PLACEMENT SUPPORTS] - Specially designed for dual GPU placement options, integrated riser GPU support bracket not only prevents the graphic card....
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With Patented Rotational PCI-E slots, you can choose the way you want to display graphic cards vertically....
  • [DRIVE BAY] - 2 x 2. 5"/3. 5" with HDD Rack + 2 x 3. 5" without HDD Bracket + 2 x 2. 5" with HDD Bracket behind MB Tray.
Check Stock

3 05 feat South $ide Vince [Explicit]

  • Supports 2.5"/3.5" dual SATA and IDE hard drives simultaneously. All in 1 dual bay docking station allows an easy accessing with two 2.5 inch & 3.5....
  • High speed USB 3.0 interface with data transfer rate up to 5Gbps, 10 times faster than USB 2.0. It supports hard disk clone, high speed one to one....
  • Tool free installation, no driver needed, plug and play, support hot plug. It features 6 slots for multiple memory cards（for SD/MMC/MS cards, TF....
  • External HDD Hard Drive Easily and quickly transfer files from HD to PC or card readers, all-in-one HDD docking with one touch backup(OTB) and one....
  • We promise 1 year limited warranty and worry-free lifetime technical support by Hfong. In the use of products during any product issues, please e-mail....
Check Stock

CY SATA Female to IDE 44Pin Disk Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • Works with all IDE 44Pin Drives up to 500GB.
  • Be good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.
  • No need for an extra power supply. No driver needed,....
  • Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) . 2.5 inch IDE 44Pin SSD or HDD Drive to SATA Female Converter Board PCBA.
Check Stock