Reviews2 5 inch Sata Hdd

Synology 5bay Expansion Unit DX517 (Diskless)

  • Synchronized system operation with Disk Station. Screwless drive tray design reduces the time needed for system setup.
  • Applied models: DS1817+, DS1517+, DS1817, DS1517. Compatible Drive Type-3.5 inch SATA HDD, 2.5 inch SATA HDD, 2.5 inch SATA SSD. Note- It is strongly recommended that you only install drives listed on your device's compatibility list. Storage pool and volume creation processes may fail when using unverified drives.
Check Stock

SATA Interface Network Adaptor HDD Hard Disk Compatible Network Card Adapter Compatible with PS2 Playstation 2 No IDE

  • HIGHT QUALITY£ºCompared with traditional SATA network adapters, SATA HDD connector plugs and sockets compatible with PlayStation 2 consoles are made....
  • BASIC PARAMETERS£ºThe hdd adapter used for the ps2 hard disk adapter is compatible with the SATA network of the PlayStation 2 host. The network....
  • FIRST DESIGN£ºHDD hard disk adapter network adapter can improve anti-interference ability and reduce interference to other devices. And connect the....
  • STRONG ANTI-INTERFERENCE ABILITY£ºSATA HDD interface network SATA interface network adapter can improve anti-interference ability and reduce....
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ...also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices, such as smartphone, tablet... WARNING:Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time..
  • ✔ X820 can be used as a USB3.0 Mobile Har....
Check Stock

Synology 2 bay NAS DiskStation DS218j (Diskless)

  • A versatile entry-level 2-bay NAS for home and personal cloud storage.
  • Dual-core CPU with hardware encryption engine. Operating Temperature: 5°C to 40°C (40°F to 104°F).
  • Everywhere access with iOS/Android/Windows ready mobile apps.
  • An integrated media server supporting multimedia streaming.Maximum Single Volume Size:16 TB.
  • 2.5" SATA HDD (with optional 2.5" Disk Holder).
  • 2.5" SATA SSD (with optional 2.5" Disk Holder).
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

Hitachi WD HGST He10 (HUH721010ALE601) 10TB 7200RPM 128MB Cache SATA 6.0Gb/s 3.5inch Enterprise Hard Drive - 5 Year Warranty (Renewed)

  • NOTE: These HDD is used by Datacenter Servers for about 5 Years period. HDD was refurbished and data wiped with DoD standard. It's fully tested & passed HGST factory diagnose software test. Since this is heavy duty enterprise HDD with a 2.5M-hour MTBF rating. We are confidence that to honor another 5 Years Warranty for these hard drives. Buy with confidence & worry free!.
  • 10TB, 128MB Cache, 7200RPM, SATA 6.0Gb/s - Designed for 24/7/365 Heavy Duty, 2.5M-hour MTBF.
  • Works for Any SATA Server, NAS (network storage), RAID, PC/Mac, CCTV DVR, Surveillance System, CCTV DVR.
  • SATA Externsion Cable included---Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system..
  • 5 Year Warranty from Reseller, Worry free Return! 100% Full Refund.
Check Stock

Adaptec 29160 PCI to Ultra160 SCSI Card Kit with EzSCSI Software

  • 1.The FS-S4-Pro is a PCI Express 3.0 X1 interface(8Gbps) to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
  • 2.Selected the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019, 2016 ,2012R2, 2012, 2008R2, 2008, 2003R2, 2003(32/64), Windows XP, Vista, 7, 8.x,10 (32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD. 3. Users must make sure PCs/Motherboards have at least one PCIE slot befo....
Check Stock

StarTech.com 2.5 SATA Drive Hot Swap Bay - for 3.5” Front Bay - Anti-Vibration - Front Mount Design - Hard Drive Caddy - Hard Drive Rack SATBP125VP

  • Hot swap drives in the front bay of your computer or server and safeguard your data with anti-vibration protection.
  • 2.5 SATA Drive Hot Swap Bay for 3.5" Bay.
  • 2.5in SATA SSD/HDD Hard Drive Rack with durable aluminum construction and Venting to optimize heat dissipation.
  • Four anti-vibration bumpers provide vibration protection to safeguard your data.
  • Supports one 2.5” SATA SSD/HDD with drive heights from 5-15 mm / Mobile Rack w/Lockable Drive Door / SATA hot swap / Hard drive caddy/ HDD caddy /....
Check Stock

SSK Aluminum Hard Drive Docking Station, USB 3.0 to SATA Dual Bay External HDD Dock Caddy Reader for 2.5 & 3.5 inch SATA HDD SSD, with UASP Offline Cloner/Duplicator Function(2x16TB Supports)

  • Compatible with all 2.5 inch and 3.5 inch SATA I/II/III HDD SSD, USB 3.0 external hard drive dock, supports UASP and SATA 5Gbps for even faster data transfers. Plug and play, no driver needed. And LED indicator status display..
  • Support offline clone duplicator function, SSK HDD enclosure can support 2x16TB hard drive simultaneously for 2.5/3.5 inch SATA I/II/III HDD/SSD, which can be used to clone an existing hard drive without connecting to a computer, easy to duplicate data from one to another hard drive..
  • Solid, shockproof & vibration-resistant aluminum case, this external SATA HDD/SSD boasts efficient Heatsink to stay cool with low power consumption for reliable data transfers..
  • Multi-OS Compatible, Compatible with Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and Mac IOS 10.4 to 10.11 Linux Kernel 2.4.2 or greater versions..
Check Stock

HornetTek USB 3.0 Dual Bay 2.5" HDD / SDD Enclosure w/RAID 0 & RAID 1

  • Support dual bay 2.5″ (Notebook Size HDD) SATA I / II / III HDD / SSD *****This unit does not support desktop size 3.5″ HDD*****.
  • SATA interface support SATAIII specification up to 6Gbps / USB 3.0 interface operates at Super Speed up to 5Gbps.
  • HDD configuration support : JBOD/ Normal/ Raid 0/ Raid 1 / 4 LED indicator for Power ON/Standby and two HDD activities.
  • Compact Design 5.25” x 2.05” x 3.55” with Aluminum case and 4CM cooling fan / Aluminum housing with metal internal hard drive tray.
  • 1 Year Warranty from Manufacturer – HornetTek Customer Service Number: (855) 594-3816.
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock