Reviews2 8 Tft Touch Screen

Smart Watch for Women Waterproof Fitness Tracker with Blood Pressure Heart Rate Blood Oxygen Sleep Monitor Message Notification Sport Pedometer Smartwatch Bracelet for iOS Android Rose Gold

【 SMART WATCH WITH TEXT AND CALL】 This smartwatch that allows you to answer or dial calls anywhere, anytime. The call function is....
【 HEART RATE MONITOR AND BLOOD OXYGEN 】 You can measure your blood oxygen saturation and understand your physical state Ideal for....
【 SLEEP MONITOR 】 Automatic sleep tracking (Deep Sleep, Light Sleep, REM and Awake) at night and provide comprehensive analysis of your....
【 IP68 WATERPROOF SMART WATCH FOR ANDROID IOS PHONES】 The smart watch is compatible with iOS 8.0 and Android 4.4 and above devices. It can....
【 1.7 HD FULL TOUCH SCREEN AND DIY WATCH FACE 】 Digital watch women men with 1.7 "TFT full touch colorful screen bring comfortable touch....

Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..

Check Stock

Puccy 2 Pack Back Protector Film, compatible with Asus Transformer Book Flip TP300 TP300LA Q302LA 13.3" Black Carbon TPU Guard Cover （ Not Tempered Glass/Not Front Screen Protectors）

Intel Core i5 5200U 2.2 GHz ~ 2.7 GHz Processor.
13.3- Inch LED-backbit TFT-LCD high-definition touch screen (1366 x 768).
Intel graphics, Built-in 1.0 MP Webcam and Microphone, 2 USB 3.0 Ports and 1 USB 2.0 Port, 2-in-1 design, Microsoft Windows 8.1 Operating system Preinstalled.

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
⭐【Satisfying After-Sales Support】If you have ....

Check Stock

5 inch Capacitive Touch Screen TFT LCD Display 800x480 HDMI LCD for Raspberry Pi, BB Black, Jetson Nano Support Systems Windows 10/8.1/8/7, Game Consoles XBOX360, Nintendo Switch

800x480 hardware resolution, configurable by software (up to 1920x1080),Capacitive 5 inch TFT touch screen.
Supports popular mini PCs such as Raspberry Pi 4/3/2/1 Model B B+ A+ Zero W ,Jetson Nano, BB Black, Banana Pi, as well as general desktop computers,When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.
Supports popular game consoles like Microsoft XBOX360 and Nintendo Switch, etc..
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
3.5mm audio jack, speaker connector, supports HDMI audio output,Also supports VGA input (specific cable is required and should be purchased separately).

Check Stock

Asus Flip 2in1 Q302la-bsi5t16 13- Inch Touchscreen Laptop (Intel Core I5-5200u 2.2ghz Processor, 8 Gb DDR3 Ram, 500 Gb Hard Drive, Windows 8.1) (Black)

Intel Core i5 5200U 2.2 GHz ~ 2.7 GHz Processor.
13.3- Inch LED-backbit TFT-LCD high-definition touch screen (1366 x 768).
Intel graphics, Built-in 1.0 MP Webcam and Microphone, 2 USB 3.0 Ports and 1 USB 2.0 Port, 2-in-1 design, Microsoft Windows 8.1 Operating system Preinstalled.

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..

Check Stock

Anycubic Full Metal i3 Mega 3D Printer with Ultrabase Heatbed and 3.5 Inch Touch Screen

Plug and play with user friendly screen: complete the assembling with 8 screws, then start to play through a 3.5-Inch tft touch screen.
Anycubic ultra base: Anycubic patented heat bed, super adhesion, smoothly lattice bottom surface. Easier to take off 3D-171 by hands, so you won't need masking tape and glue stickers any more.
Filament detection: automatic printing pause when filament runs out, resume after filament re-load with just one click.
Anycubic Advantage: We take care of all parts of unartificial quality-related issues with a replacement for 3 months after the purchase date, and provide lifetime technical support.

Check Stock

AMOLED 2023 New HK8 Pro Max Ultra Smart Watch Men Series 8 49mm 2.12 Inch High Refresh Rtae AMOLED Screen NFC IWO Smartwatch Women Black

APP RDFit Compatible System (Compatible System) Android4.4 (inclusive) and above, IOS9.0 (inclusive) and above FLASH memory (FLASH memory) RAM: 192KB, ROM: 256KB Flash: 128M.
Type (Type) TFT Screen size (screen size) 2.16 inches Pixel (Resolution) 420*486 IPS Touch type (Type) full screen touch BT BT5.0.
NFC support Gravity sensor (G-Sensor) support.
Battery type (Type) lithium polymer Capacity 350mAh Charging Method Wireless Charging.
Waterproof level (Waterproof Level) IP68 Charging time (Charging time) about 3H Life time (Life time) about 5-7 days in use, 30 days in standby.

Check Stock

HTC EVO View 4G Android Tablet (Sprint)

Android Operating System, Bluetooth 3.0 with A2DP for stereo headsets.
16GB internal memory, with expansion possible through a microSD slot.
7-inch 1024x600 TFT capacitive touch screen, Rear (5MP) and Front (1.3MP) cameras.
Wi-Fi 802.11 b/g/n 2.4GHz, G-sensor, GPS/aGPS, digital compass, ambient light sensor.

Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock