Panasonic KX-TGP600 SIP Dect Base Unit & Cordless Handset
- Support for up to 8 DECT handsets/up to 8 SIP registrations.
- Up to 8 simultaneous network conversations.
Reviews2 8 inch Tft Display
LG Stylo 3 Plus TP450 T-Mobile Only (Renewed)
- 6.2 inch FHD+ TFT FullVision 18 : 9 Display, 2160 x 1080 pixels, Single SIM, Includes Stylus Pen.
- 32GB Storage, 3GB RAM, Qualcomm SDM450 Snapdragon 450 (14 nm), Up to 1.8 GHz Octa-Core, 3500 mAh Battery.
- Rear Camera : 16 MP, Front Camera : 8 MP, USB Type-C Charging, Bluetooth 4.2, Android 9.0 Pie.
- 2G bands : GSM 850 - 900 - 1800 - 1900, 3G bands : HSDPA 850 - 1700 (AWS) - 1900, 4G bands : 2, 4, 5, 12, 14, 29, 30, 66.
ASUS VE228H 21.5\ Full HD 1920x1080 HDMI DVI VGA Back-lit LED Monitor, Black
- Slim Design 21.5 Inch Wide Screen LED display with 1920x1080 Resolution and Quick 5 ms response time delivering smooth video display.
- Aspect Control function allows users to select a preferred display mode among Full and 4:3 for true to life gaming or movie watching without any data loss or image distortion.
- Dual Inputs of D sub and DVI with HDCP Supported and Built In 1W X 2 Speaker enable audio enjoyment together with true to life visual.
- BSMI, CB, CCC, CE, CEL level 2, C Tick, ErP, FCC, Gost R, J MOSS, TCO6.0, UL/cUL, VCCI, WEEE, WHQL (Windows 8, Windows 7, Windows Vista).
- Splendid Video Intelligence Technology optimizes video performance and image fidelity by enhancing color, brightness, contrast, and sharpness.
- 10,000,000:1 ASUS Smart Contrast Ratio dynamically enhances the display’s contrast to delivering lifelike images.
UCTRONICS High Precision Handheld LC Inductor Capacitor Tester, Inductive Capacitance Meter Kit, 1pF-100mF, 1uH-100H
- Continuously Adjustable: The measuring frequency is up to 100KHz, and the 1Hz step is continuously adjustable.
- Support Screening And Deviation Measurement: Support DC resistance, electrolytic capacitance measurement, support screening and deviation measurement.
- 10mV-500mV Voltage Output: Internal bias voltage output (10mV-500mV).
- High Measuring Accuracy: Component measurement is automatically recognized, the basic measurement accuracy is 0.2%, and the measurement speed can be adjusted.
- Support For The SCPI Protocol: 5.2.8 inch TFT display, 4 and a half display. USB communication interface, large capacity lithium battery power supply. Support for the SCPI protocol.
BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi
- 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
- 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
- with a capacitive touch panel. Supports 5-point touch..
- 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
- 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
- 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
UNI-T UTG932 + UTD2152CEX, Function Generator and Oscilloscope Kit
- 25 MHz to 50 MHz BANDWIDTH 1/2 ANALOG CHANNELS 250 MSa/s REAL-TIME SAMPLE RATE 12 kpts MAX. MEMORY DEPTH voltage, current, resistance, etc. Display count:3999 MULTIMETER 3.5 inches TFT LCD DISPLAY.
- UTD1050CL 50 MHz 1 200 Msa/s 12 kpts voltage, current, resistance, etc. Display count:3999 3.5 inches TFL LCD.
Early 2016 Apple MacBook with 1,2 GHz Intel Core M5 dual-core (12 Inch Retina, 8GB, 512 GB ) Rose Gold (Renewed)
- 12.0-inch TFT LED-backlit Active-Matrix Retina Display with IPS Technology, 2304 x 1440 pixel resolution (~226ppi pixel density).
- Ports: USB v3.1 x1 (Gen 2 Type-C), Display Port x1, Audio Port x1.
- 78-Key Full Size Keyboard, Multi-touch Gestures, Force Touch Trackpad and Built-in 39.7 watt-hour lithium-polymer battery - Up to 9 hours of wireless wed usage.
- 1.2 GHz Dual-Core Intel Core M5 Processor (Turbo Boost up to 3.1 GHz) with 4 MB shared L3 cache and 8 GB of 1866 MHz LPDDR3 RAM.
- Intel HD Graphics 515,8 GB of 1866 MHz LPDDR3 RAM.
- 512 GB PCIe-based onboard flash storage and 12-Inch IPS LED-backlit Display.
- USB-C Port Only. PEASE NOTE: This MacBook has a single USB-C port (a new version of USB) which handles power and connectivity to all peripherals. An accessory adapter can be purchased to connect standard USB devices to this MacBook. . Please refer the User Manual before use..
- 1.2 GHz Dual-Core Intel Core M5 Processor (Turbo Boost up to 3.1 GHz) with 4 MB shared L3 cache.
DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)
- This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
- This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
- 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
- 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
- Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot
- ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
- ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
- ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
- ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
ASUS VE228H 21.5in Full HD 1920x1080 HDMI DVI VGA Back-lit LED Monitor (Renewed)
- Slim Design 21.5 Inch Wide Screen LED display with 1920x1080 Resolution and Quick 5 ms response time delivering smooth video display.
- Aspect Control function allows users to select a preferred display mode among Full and 4:3 for true-to-life gaming or movie watching without any data loss or image distortion..
- Dual Inputs of D-sub and DVI with HDCP Supported and Built In 1W X 2 Speaker enable audio enjoyment together with true-to-life visual. Compliance and Standards- BSMI, CB, CCC, CE, CEL level 2, C-Tick, ErP, FCC, Gost-R, J-MOSS, TCO6.0, UL/cUL, VCCI, WEEE, WHQL (Windows 8, Windows 7, Windows Vista).
- Splendid Video Intelligence Technology optimizes video performance and image fidelity by enhancing color, brightness, contrast, and sharpness..
- 10,000,000:1 ASUS Smart Contrast Ratio dynamically enhances the display’s contrast to delivering lifelike images.
DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only
- ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
- ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
- You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
- If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
- ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..