Reviews2 Flutes End Mills

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
Durable, high precision and not easy to break.
easy installation and improved work efficiency..
Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..

5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
Hardened and ground For Bridgeport type milling machines.
Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
For double and single end mills (single end mils only for sizes over 5/8").

Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
Stub length end mills for extra rigidity.
Fitted wood block stand included and each size comes in a marked plastic tube.
Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
Shell mills can easily be held with Straight Shank arbors.
Clearance & relief angels are built into the base.

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.