Reviews2 Spindle

Shop Fox W1827 Shaper 5 Horsepower

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt).

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt).

Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Outer spindle acts on the clamping jaws – inner spindle applies pressure to the front edge.
Two large non-slip, opposing, gentle jaws for positive grip.
Large swivel pressure plate with protective plastic cap.
Lightweight, corrosion-resistant aluminum housing designed for high static stress load.

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Install the internal thread of the spindle: 1"x8 TPI..
Install the external thread of the chuck: 1-1/2-8 TPI..
Convert a 1"x8 TPI lathe headstock spindle to 1-1/2-8 TPI..
The adapter body is made of hard steel. Greatly extend the service life..
The weight of the adapter is 0.53LB. The length is 1.57" and the width is 1.77". This will extend the spindle length by approximately 1-1/2"..

Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

Convert a 1-1/4" x 8tpi lathe headstock spindle to 1" x 8tpi.
Allows a 1-1/4" x 8tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories.
Extends spindle length approximately 1-1/2".
Flats allow for solid wrench tool grip for tightening and loosening from spindle.