Reviews2 Table 8 Spindle

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".

5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute.
4-1/4 inch spindle travel creates mortises up to 3 inches in depth.
Features a spacious 13-1/2 by 6 inch table and a 10 by 8 inch cast iron base.
Onboard tool and chisel storage maximizes organization while keeping bits accessible.
Includes three chisel bits (1/4, 3/8, and 1/2 inch), a protective chip guard, a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-tensioned fence, depth stop, and a two-year warranty.

12-1/2" X 17" PRECISION-GROUND CAST IRON TABLE: Features twin T-slot grooves, and four table slots..
ONE-HANDED BELT TENSIONING: Allows for rapid speed changes..
DRILLING ACCURACY: X-shaped XACTA Laser ensures perfection every time..
INCREASED VISIBILITY: LED work light increases visibility for intricate applications..

Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
Product 2: Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches.
Product 2: Fits any drill press table between 5 and 16 inches in width.
Product 2: Designed to fit the entire WEN Drill Press Series.

5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute.
4-1/4-inch spindle travel creates mortises up to 3 inches in depth.
Features a spacious 13-1/2 by 6-inch table and a 10 by 8-inch cast iron base.
Onboard tool and chisel storage maximizes organization while keeping bits accessible.
Includes three chisel bits (1/4, 3/8, and 1/2 inch), a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-loaded cast iron fence, depth stop, and a two-year warranty.

Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..

INCLUDES: (1) oscillating spindle sander, (6) sander sleeves, (5) rubber sandpaper drums, (6) table inserts, (5) drum washers, and (1) spindle knob.
FEATURES: A lightweight portable design, sturdy and stable full coverage work table, easy to change sanding sleeves in assorted sizes for versatility, and onboard storage for all of your sander parts.
UNIQUE DESIGN: Our home improvement sander flaunts an 14” cast iron worktable with a true-round design, delivering full support for an assortment of different sized and shaped projects.
POWER: 2/5 Horsepower - 2. 6 Amp induction motor provides 1725 RPM.
DUST PICKUP: Possesses a highly functional built-in dust collection system with a 2 inch port that works with an assortment of dust collectors and shop vacs to keep your work space clean and clear of saw dust.

Features five sizes of sanding sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, and 2 inches.
2000 RPM motor oscillates spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Spacious 14-1/2 by 14-1/2-inch table bevels up to 45 degrees to accommodate angled workpieces.

Plenty of Travel: Spindle travels a full 3-1/8" with one revolution of the handle..
Large 12-1/2" x 17" Work Table: Features twin T-slot grooves and four table slots to accommodate any project..
Accurate Drilling: XACTA-X Precision Laser System easily identifies the drill center..
Increased Visibility: Long-lasting, built-in LED work light provides direct lighting while reducing shadows for intricate applications..
Rapid Speed Changes: One-handed belt tensioning system..