Reviews2 layer Pcb

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • ...action to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding around on your workbench, even protect the work surface against scratches and scuffs. NOTE: Due to different manufacturers’ production batches, the iron plate may also be updated at any time(eg with holes or engraved LOGO). Under normal circumstances, it will not affect your normal use..
  • Widely Used & Service: Helping hands soldering for any electronic, welding, crafting, painting, figurine and hobby work, or any precision project that requires extreme accurac....
Check Stock

Gikfun Electronic Hourglass led DIY Kits Welding Practice Board Blue Ray EK1886

  • This is a beautiful electronic hourglass that is fun to build and nice to look at when finished, it is not only a PCB board for practicing welding....
  • Comes with English user manual and online PDF file, which will guide you how to finish step by step, perfect for school basic electronics experiment....
  • The suite adopts double layer PCB, and the circuit consists of 30 pieces white LED blue ray..
  • Under the control of MCU program, it displays analog hourglass image..
Check Stock

MSI PRO Z790-A WiFi ProSeries Motherboard (Supports 12th/13th Gen Intel Processors, LGA 1700, DDR5, PCIe 5.0, M.2, 2.5Gbps LAN, USB 3.2 Gen2, Wi-Fi 6E, ATX)

  • Supports 12th/13th Gen Intel Core, Pentium Gold, and Celeron Processors.
  • Supports DDR5 Memory, up to 7200+(OC) MHz.
  • Enhanced Power Design: 16+1+1 DRPS with 80A SPS, dual 8-pin CPU power connectors, Core Boost, Memory Boost.
  • Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

Cerwin Vega H71200.5D 1200W Max / 760 RMS 2Ω Stable 5-Channel Amplifier

  • Latest High-Efficiency Class D Technology.
  • Surface Mount Component Technology with 2-Layer PCB.
  • RCA “Pass Thru” output for easy system expansion.
  • Fully Variable Crossovers (12dB per octave).
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

Ducky One Mini RGB LED 60% Double Shot PBT Mechanical Keyboard Cherry MX Silver

  • Distinctive bezel design and dual layer PCB.
  • Supports Ducky Macro 2.0, the most powerful hardware available in the market.
  • 3 level adjustable feet and detachable USB-C cable.
  • Fun RGB lighting modes and mode architecture.
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

Micro Center Intel Core i7-12700K 12 Gen Alder Lake 12-Core (8P+4E) up to 5.0 GHz Unlocked  LGA1700 Desktop Processor with ASUS TUF Gaming Z690-Plus WiFi D4 ATX Gaming Motherboard

  • Core i7 12th Gen Alder Lake 12-Core (8P+4E) ,up to 5.0 GHz Unlocked LGA1700 600 Series Chipset, 25MB L3 Cache,12MB L2 Cache.
  • The processor features Socket LGA-1700 socket for installation on the PCB,Intel 7 Alder Lake Processor Base Power: 125W,Intel UHD Graphics 770,Windows 11 Supported.
  • ASUS TUF Gaming Z690-Plus WiFi D4 Intel Z690 (LGA 1700) ATX gaming motherboard,Ready for 12th Gen Intel Core processors,DDR4 memory, four M.2 slots, HDMI, DisplayPort, SATA 6 Gbps,14+1 DrMOS, six-layer PCB, ProCool sockets, alloy chokes and durable capacitors for stable power delivery.
  • Next-gen connectivity:PCIe 5.0, USB 3.2 Gen2x2 Type-C, front USB 3.2 Gen 2 Type-C, Thunderbolt 4 header support,Made for online gaming:WiFi 6, Intel 2.5 Gb Ethernet and TUF LANGuard.
  • Outshine RGB Aura Effect:Stylish edge and PCH lighting design, addressable RGB headers and RGB strip header support,Comprehensive cooling:Enlarged VRM heatsink, PCH fanless heatsink, M.2 heatsinks, hybrid fan headers and Fan Xpert 4 utility in Armoury Crate.
Check Stock

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

  • 4-layer, 2 oz copper PCB for improved heat dissipation.
  • Can interface directly with 3.3 V and 5 V systems.
  • Simple step and direction control interface.
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock