Reviews2 pc Ball Valves

Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve

WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine..
WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets..
SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places..
BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves..

Check Stock

DELTA RP4993 New Style Seats And Springs Assembly - 133467

For use in Delta single-lever faucets with RP70 stainless steel ball valves and lever handles.
Repairs leaks in kitchen, lavatory, tub and shower faucets.
Includes 2 rubber seats, 2 springs, 4 O-rings, plastic cam, rubber packing, RP70 stainless steel ball and a wrench.
Perfect for contractors, maintenance repair professionals and do-it-yourself owners.

Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....

Check Stock

UEHICT Garden Hose Splitter 2 Way Heavy Duty - Water Hose Splitter Solid Brass Garden Hose Y Splitter, Hose Bib Splitter Outdoor Faucet Splitter Y Connector for Garden Hose with Two Shut-Off Valves

...ile the other for washing your car. This spigot splitter could also act as a spigot extender If your faucet is too recessed into the wall..
【Build To Last】UEHICT water spigot splitter is crafted from heavy duty brass to not only ensure long-term reliability, but also so that it won't rust. With its interior ball valves also made of premium metal, you won't have to worry about it becoming brittle or cracking in all kinds of weather..
【Dual Valve Closure】This brass hose splitter has 2 shut-off valves. It allows you to control the flow separately and easily. The handles of this garden hose y splitter, covered with TPR for easy grip and operation, are friendly to manipulate for stiff hands or hands with arthritis..
【Leak-Resistant Construction】UEHICT y hose connector is fitted with high quality metal ball valves for a tight seal. Featuring deep threads for a solid connection, this garden hose splitter 2 way effectively maintains water pressure and prevents any leaks or drips..
【Seamless Installation】UEHICT y connector for garden hose fits all standard 3/4" spigots and hoses. No tools are required, you can have an easy and flawless installation. Each unit comes with a teflon tape and three extra rubber sealing washers for replacement..

Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.

Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..

Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
This minimizes pressure loss through the valve.
9V-24V AC/DC- Works effectively over entire voltage range.
No power expended once fully open or fully closed.
3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.

Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

Reduced pressure principle backﬂow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
Pre-plumbed backﬂow station. Assembly can be of the reduced pressure principle or of the double check type.

Check Stock

Leviton 40987-2 Two Way Splitter

HEAVY DUTY CONSTRUCTION: This hose splitter is made of solid high-grade brass making it durable and rugged, it will never rust or corrode. It’s compatible with all standard garden hose connections and made to last a lifetime..
BRASS ON/OFF VALVES: Heavy duty on/off valves to control the water flow of each connection to the splitter. The valve levers are made of solid brass so it’s durable and yet it was designed to be easy to grip and turn..
EASY TO USE: The brass texture on the splitter connector makes it super easy to connect it to the faucet and the threading on the 2 male ends are designed to fit all standard hoses..
LEAK-FREE: A precision threaded connection and rubber gasket for perfect attachment to your faucet provides an extreme water-tight seal. The on/off levers are fitted with high quality ball valves for water tight shutoff making the splitter leak-free..
100% SATISFACTION GUARANTEE: If you are not 100% satisfied with your INNAV8 Brass Splitter and if does not exceed your expectations, we will replace it or refund your money with no questions asked!.

Check Stock

Mini Bike Pump Portable Bicycle Tire Pump Mini Hand Air Pump for Bikes, High Pressure PSI – Fits Presta and Schrader Valves Aluminum Alloy Lightweight – with Bike tire Repair kit – HSINMAXit

〖FUNCTION〗 -This Mini bike pump inflates for road bike, mountain bike and BMX bike. It is the bike pump for all bike tires pumping when riding.It fits both presta valves and schrader valves,and you can also use this mini bike pump to inflate balls,balloons and swim rings with spare valves..
〖FEATURES〗-This mini bike pump portable and lightweight with high pressure 100 PSI,compact and easy to carry it. You can put this bicycle tire pump into your bike bag or backpack and you can also install it on bike frame together with your bottle cage. Length of this mini bike pump is 19.5 centimeters and weight is 90 gram..
〖QUALITY〗-This air pump for bikes is made of aluminum alloy.Durable,Stable and Fashionable. It doesn’t leak.(1)Flip up the dust cap.
(2)Unscrew to take out the pump hose inside the tube.
(3)One end of this pump hose screw on the bottom side of the bike pump.
(4)Its other end screw on your tire valve.
(5)Start to inflate.Thanks a lot for choosing HSINMAXit product.we have after-sales service. If you don’t like our product,please contact us for refund at your time..
〖GIFT〗-One spare set of bike tire repair kit for you. It will help if you need to repair your tires outdoors.how to repair the tire:(1)Use the lever to remove the inner ....

Check Stock

Scilogex 17000110 Levo Plus Filter 3 Micron

Labs rubber bulb pipette filler made from all natural rubber.
Pipette Filler has three valves that each containing a chemical-resistant stainless steel ball. a bulb and three pinch valves controlling influx and efflux of pipette contents..
Pipet bulb size:5.4cm(2.1'')in diameter, 13cm(5.1'') in total length. Will accommodate pipettes up to 50ml..
Suitable for use in industrial and mining enterprises laboratory, agricultural research laboratory, food laboratory, experimental chemistry laboratory, teaching chemical laboratory and other unit departments.
Pipette filler is a good laboratory assistant for use with pipettes. Despite the widespread use of pipettes, it does not replace the role of pipettes as a classical quantitative pipetting solution, especially for liquid volumes greater than 1 ml..

Check Stock