Reviews2 pc Shaft Low Torque

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 1 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 266 In-lb Torque, 17+1 Position and 34pcs Drill/Driver Bits

【20 Voltage & 2 Variable Speeds】 Higher voltage means more torque-spinning strength to overcome resistance. This 2 variable-speed ( 0-350 & 0-1300 RPM ) cordless drill with an adjustable clutch gives you the versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed is for drilling holes..
【25+1 Position Clutch & 266 In-lbs Max Torque】 This cordless drill's clutch provides precise control for drilling, which helps to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 17-Torque allows for various applications and additional 1-torque for drilling..
【1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator lets you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits for your purposes. LED Light for increased visibility....

Check Stock

Dremel 9100-21 Fortiflex 2.5 Amp Flex Shaft Powerful Rotary Tool Kit- Hands-Free Speed Control for Precision Crafts & Projects, Detail Sander, Polisher, Engraver, Etcher

HIGH PERFORMANCE MOTOR : High-torque, smooth-running, powerful 2.5 amp (1/5 HP) motor provides high torque at low speeds. Perfect for large jobs..
HANDS-FREE VARIABLE SPEED CONTROL : Provides maximum power with variable speed range of 0 – 23,000 RPM, controlled through the foot pedal allowing for hands-free control. Ideal for carving, cutting, engraving, smoothing, polishing and sanding applications..
HEAVY DUTY FLEXIBLE SHAFT: Features a bearing system for maximum durability and cool operation..
VERSATILE ROTARY TOOL KIT : Includes Fortiflex Motor Unit, variable speed foot pedal, heavy duty flex shaft, hand-piece with integrated chuck, wall hook, and 21 genuine Dremel accessories ideal for cutting, carving/engraving, cleaning/polishing, sanding, and sharpening/grinding applications..
2 YEAR WARRANTY & US-BASED CUSTOMER SERVICE : Available by chat, email, phone or visit us at our service center in Racine, WI.

Check Stock

Sprinkler Head Trimmer, 6 in

Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..

Check Stock

TEKTON 1/2 Inch Drive Click Torque Wrench 25-250 ft.-lb | 24340

Includes 1-pc. 1/2 in. drive torque wrench.
Product manual with torque conversion chart.
Wrench emits a click that can be heard and felt when the preset value is reached.
Permanently marked, high-contrast dual-range scale is easy to read, even in low light.
Reversible ratchet head drives in both directions and measures torque in clockwise direction.
Durable all-steel construction has no plastic parts to break or wear out.

Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
Bore has keyway and setscrew for use with keyed shaft.

Check Stock

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
Bore has keyway and setscrew for use with keyed shaft.

Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

Fielect Shaft Coupling 17mm to 17mm Bore L66x40D Flexible Coupler Joint for Servo Stepped Motor

【Dimension】 - Shaft usage:17mm to 17mm/0.67" to 0.67".
【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthread holding tight.
【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.

Check Stock