Reviews205mm Nozzle

SUNLU TPU Filament 1.75mm, Flexible Soft TPU 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.03mm, 0.5KG, 95A TPU Blue

  • ①【TPU 3D Printing Filament】TPU filament is made of flexible thermoplastic polyurethane, like rubber. Very suitable for printing keyrings, insoles, mobile phone cases, etc.!.
  • ②【Excellent Printed Results】SUNLU TPU filament has excellent layer adhesion, very easy to print. TPU filament is wear-resistant, oil-resistant, good elasticity, anti-aging, color, no bobble..
  • ③【TPU Recommend Settings】We recommend printing at a Nozzle temperature of 205°C - 230°C (401°F - 446°F) and Bed temperature of 0°C - 60°C (0°F - 140°F), printing speed is 0 - 40mm/s..
  • ④【TPU 1.75mm Diameter】Dimensional Accuracy +/- 0.03mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ⑤【SUNLU Spool Diameter】Spool Diameter: 8.00.
Check Stock

Neon Yellow PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament, Highlighter Yellow

  • PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
  • Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
  • Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
  • Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check Stock

Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box

  • 1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

TPU Filament 1.75mm, SUNLU TPU 3D Printer Filament, Flexible Filament 1.75, Dimensional Accuracy +/- 0.03mm, 0.5kg Spool, 1.75 TPU Grey

  • ①【TPU 3D Printing Filament】TPU filament is made of flexible thermoplastic polyurethane, like rubber. Very suitable for printing keyrings, insoles, mobile phone cases, etc.!.
  • ②【Excellent Printed Results】SUNLU TPU filament has excellent layer adhesion, very easy to print. TPU filament is wear-resistant, oil-resistant, good elasticity, anti-aging, color, no bobble..
  • ③【TPU Recommend Settings】We recommend printing at a Nozzle temperature of 205°C - 230°C (401°F - 446°F) and Bed temperature of 0°C - 60°C (0°F - 140°F), printing speed is 0 - 40mm/s..
  • ④【TPU 1.75mm Diameter】Dimensional Accuracy +/- 0.03mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ⑤【SUNLU Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
Check Stock

EmeTerm Conductive Gel

  • Replacement cord: Magnetic USB charger cord fits for below series of YAMAY /LETSFIT/WILLFUL&Haylou 2 pin 4.0mm smart watch , 2 pcs fast charger cord....
  • Widely Fit: 2 pins 2.84mm(center to center) magnetic head for All 205L 205U 205S Smart Watches Fitness Watches ,Compatible with Fitpolo ID205L YAMAY....
  • Good quality:flexible cord bears the times of bending and with the strong magnetic design, the cable can snap on to yoursmart watch , stable and allow....
  • Safe Charge: Hign speed with the overvoltage and overcurrent protection ,safe to protect your smart watch and also maintain the fast charging speed..
  • Portable :3.3 Ft cord , 2 pcs in each package, lightweight , easy to carry out . Good to backup in your office or car ,bag in outside..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

ViCRiOR Bands Compatible with ID205L Veryfitpro Smart Watch Quick Release Soft Silicone Fadeless Pattern Printed Floral Replacement Band for ID205L ID205G ID205 ID205U ID205S

  • Specially designed Band for ID205L ID205 ID205G ID205S ID216 Veryfitpro Smartwatch.
  • Washable and Durable Silicone Material: More Soft and Durable Silicone band will prevent your skin from irritation or allergy.
  • Easy to adjust the length to fit your wrist. Fit 6.0 inch -8.4 inch (152mm-215mm). with Aluminum Buckle, easy to install and adjustable, holds your....
  • EASY TO INSTALL: With quick release spring bars, which locks onto ID205L Watch Band Interface precisely and securely, no tool needed. Fashion design....
  • BEST GIFT - Package Contents: 3 x ID205L silicone watch band - You can contact us, if there is any question with our product. We will do our best to....
Check Stock

Cordless Heat Gun for Dewalt 20v Battery, LIVOWALNY 350W 122℉-1022℉ Fast Heating Soldering Hot Air Gun with LCD Digital Display for Shrink Tubing, PVC Wrap, Crafts, Epoxy Resin (No Battery)

  • ...as long as you bring batteries. And you no longer need to be tethered to an outlet or struggle with tangled cords, making it easy to work in tight spaces, on job sites, or outdoors. Warm tip: this product does not include batteries..
  • 【Wide Applications with 5 Replaceable Nozzles】——This heat gun for dewalt is the top choice for professionals and DIY enthusiasts who demand the best. Additionally, we give away 5 of nozzles: 3 step/4 step nozzle for detailed soldering, shrink wrapping, vinyl wrap.
  • Reflector nozzle for shrinking tubing, bending pipes.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Gray - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock