Reviews20mm Id Hose

Hotwin 9.49mm SAE 5/16' 8mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

▶Fuel Line Quick Connect / Disconnect for Fuel / Gas and other common fluid types..
▶Nylon Hose to ID=5/16" (8mm) Rubber Hose..
▶Part number: 9.49mm SAE Fuel Line Connect..
▶Please check the part number and pictures to verify this is the part you need..
▶Package included: 9.49mm SAE 5/16" 8mm Nylon Fuel Line Quick Connect Release Hose.

Check Stock

Flexfab 5526 Series 1" x 50' Boxed Blue Silicone Heater Hose - 25mm 1.00" Radiator Coolant Hose Part 5526-100

Inside Diameter (ID): 1.00" (25mm) ,Outside Diameter (OD): 1.33" (34mm).
Actual Burst Pressure 250 PSI / SAE J20 R3 175 PSI.
Factory Box 1-2 Lengths of Hose Equalling 50 ft in length..

Check Stock

Kegerator CO2 Gas Line Beer Hose Beer Gas Line 5/16 Red Gas Line 3/16 Beer Line with Hose Clamp for Home Brewing Beer Tower Beer Keg Kegging by PERA

1.Include: 5ft Clear Beer Hose ID 3/16" OD 7/16", 5ft Red Gas Hose ID 5/16" OD 9/16", two pcs 8-12mm Hose Clamps and two pcs 10-16mm Hose clamps.
2.Material: PVC Material for Beer Gas Line and Stainless Steel for Worm Clamps.
3.Future: 1/4" Wall thickness of The Gas hose can endure a higher pressures of a draft system. The Beer tube can resistant most alkali, alcohol, and mild acids and chemicals. Worm Clamps will confirm no leak problem during the connection.
4.Widely Use: The Beer Tube usually connect Beer Tower, Beer Keg, Beer Kegerator and the Gas Tube usually Connect Gas Regulator, Gas Manifold, Tank. This set will complete your Home Brewing Beer Keg System.
5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..

Check Stock

9.85-Foot/3m Length Stretchy 1/4 Inch ID Fuel Line+20pcs 1/3\ ID Hose Clamps for Lawn Mower Tractor Kawasaki Kohler for Briggs & Stratton motorcycle snow blowers Small Engines

Product name: ID Fuel Line Kit with 10PCS 2/5" (11mm) ID Hose Clamps..
Thickened pipe wall design: The fuel pipe is divided into three levels: inner pipe, middle layer and outer pipe. The inner diameter is about 1/4" (6mm), the outer diameter is about 0.53" (13.5mm) and the wall thickness is about 0.16" (4mm)..
Product material: the inner tube is made of rubber, and the middle layer is made of fiber thread. The hose clamp is made of spring steel.
Product advantages: comfortable appearance, smooth and flat.
high and low temperature resistance, wear-resistant rubber fiber layer can be woven, can make the hose withstand greater pressure, used for connection, fixation, and ensure its stability..
Scope of application: suitable for small engines: tractors, lawn mowers, snow machines, power equipment, etc..

Check Stock

BUSY-CORNER 80 Pieces Vacuum Cap Assortment, Black Rubber, Dropper ID from 5/32' to 3/8' Sizes, Hose Caps Kit for Carburetor,Manifold

High Quality: Made of durable flexible nitrile rubber,are durable,high temperature resistance..
Detailed Size: ID 3/8'' (9.52mm) * IL 1'' (25.4mm) = 5pcs dropper vacuum cap, ID 5/16'' (7.93mm) * IL 7/8'' (22.22mm) = 5pcs dropper vacuum cap, ID 1/4'' (6.35mm) * IL 1-1/4'' (31.75mm) = 10pcs dropper vacuum cap, ID 7/32'' (5.55mm) * IL 47/64'' (18.65mm) = 20pcs dropper vacuum cap, ID 3/16'' (4.76mm) * IL 11/16'' (17.46mm) = 20pcs dropper vacuum cap, ID 5/32'' (3.96mm) * IL 39/64'' (15.48mm) = 20pcs dropper vacuum cap..
Wide Features: Rubber vacuum caps can provide a tight fit to prevent vacuum leakage. Widely used in carburetor, manifold, automotive, pipelines and hoses etc..
Handy Packing: Total 6 Sizes 80pcs rubber vacuum cap kit packed in a clear plastic case, makes it easy to find correct item quickly, saves your time of running around looking for a particular size vacuum caps..
Customer Service: You are unhappy for any reason, return your goods with no questions asked and BUSY-CORNER STORE will provide a full refund..

Check Stock

HIAORS Gas Fuel Filter Hose Tube Line for Chinese GY6 50cc 150cc 139QMB 157QMJ Tao Tao Scooter ATV Motorcycle Parts

【Thickened Fuel Line】The inner and the outer pipe are made of rubber. Wall thickness is 3mm. Oil resistant, cold-resistant and ethanol tolerance. 9.8 Foot / 3m hose can be cut to size for all your applications..
【Super Durability】The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance.
For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications..
【Perfect Application】The parts work fine in replacing the whole fuel line on your old lawn tractor. It works fine and is very eazy to install. You can use a little soapy water on the tubing to push it onto the filter and onto the gas tank. Make sure the little metal spring clips are on the tubing a little further down than the lenght of filter ends..
【Wide Application】Compatible with Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors motorcycle snow blowers dirt bikes and just about all small engines..
【Upgraded Set】The HIDARS Package includes 9.8 Foot 1/4" ID Fuel Line.

Check Stock

ABN 50ft Long Air Compressor Hose, 3/8 Air Hose All Weather-Proof Hose Lightweight PVC Compressor Hose 300 PSI

BLOW THEM AWAY: Effortlessly blow out air from your air compressor (not included) and into your application for a myriad of jobs such as inflating or deflating air pressure of your passenger car, truck, motorcycle, and bicycle tires.
IMPROVE GAS MILEAGE: Keeping your tires properly inflated improves gas mileage and ensures a safer drive for cars, trucks, motorcycles, and bicycles up to 300 PSI (20.7 Bar).
ATTACHMENTS INCLUDED: 3/8-inch straight air chuck to conveniently fill tires.
Included glad hand connects the air line from your truck or tractor to your trailer.
Simply press your seals together with the couplers at a 90-degree angle and turn the glad hand attached to the hose to join and lock couplers.
DURABLE PVC CONSTRUCTION: Lightweight 3/8-inch (10mm) inside diameter (ID) PVC construction is not as bulky as other hoses and weighs only 5 pounds (2kg) for maneuverability during use.
Abrasion-resistant outer covering allows use in every weather condition without tears or other damage.
PACKAGE CONTENTS: Package includes (1) 50-foot long 3/8-inch ID air compressor hose with (1) glad hand and (1) straight air chuck.
Air pump/compressor required, not included.

Check Stock

Bykski Hard Tubing Bending Kit Insert Rod Cutter Polisher Scissor DIY Tools for Rigid PETG Hose PC Water Cooling System (for 16mm OD Tubings)

DIY bending tools for ID 8mm x 12mm, ID 10mm x OD 14mm, and ID 12mm x OD 16mm PETG rigid tubings / hose. It is optional..
Includes Mandrels for 45/90/180 degree bends.
Silicone rod insert prevents kinks and to help promoting smooth bends while keeping inner wall diameter.
Recommended to use soapy water assists with tube insertion and tube heating..
Pre-drilled holes allow easy mounting of mandrels to flat surface.

Check Stock

Olmsted Forge Hose Kit: 1/2" ID x 25' HP Quality Coiled Hose (Charcoal Gray) with Metal Body Spray Nozzle and Brass Quick Release Swivel Connector

EASY TO USE - Self-Coiling Hose is lightweight and flexible, making it easy to handle. Say goodbye to the kinks and tangles of your old hose. The standard 3/4" GHT brass connectors are compatible with standard American outdoor faucets..
GREAT DURABILITY - Hoses can take a beating, so this Olmsted Forge hose is made from high quality materials. Built with newly upgraded High Performance Polyether material and anti-corrosion brass fittings..
LARGER HOSE SIZE - The 1/2" hose ID provides 30% more flow rate than 3/8” ID coiled hoses, and the extra thick hose wall adds strength and durability..
COMPACT STORAGE - The hose coils from its full 20-foot usable length down to 17 inches, taking up much less storage space than a traditional hose of the same length..
SPRAY NOZZLE INCLUDED - The metal body nozzle with adjustable spray pattern is very strong and sturdy. The spray tip and integrated trigger mechanism is manufactured with all stainless steel and solid brass components providing for years of reliable service. The contoured comfort grip makes this nozzle easy to hold and us....

Check Stock

YXQ Silicone Tubing 4mm ID 6mm OD Hose Rubber Flexible 1mm Thickness Translucent Tubing Pipe Water Air for Pump Transfer (20Ft Length)

20Ft/6.1M Length Silicone Hose Tube,4mm ID, 6mm OD.
Wall Thickness: 1mm,Light weight, small bending radius, high mechanical strength.
Opacity:Translucent, will withstand repeated use and for visual inspection of fluids..
Silicone tube Widely used in fluid handling, lab equipment, peristaltic pumps, titration pumps, draining, water/oil change, or other filling equipment..

Check Stock

UTSAUTO Silicone Vacuum Tubing Hose High Performance 6.6 Feet (2M), ID 0.16\ (4MM) Silicone Vacuum Tubing Hose - Black

Silicone Vacuum Tubing Hose Inside Diameter: ID 0.16" (4mm), OD 0.39" (10mm) ,Wall Thickness: 3MM, Length: 6.6 Feet ( 2 Meter ) Per Roll.
Silicone Vacuum Hose Line Min temperature: -40 C. Max temperature: 220 C/428 F..
Vacuum Hose Work pressure: 0.3 to 0.9 MPA, Bursting Pressure: 2MPA..
Made of high quality silicone material to ensure strength and durability.
Wide use: it applies to most cars trucks air or water transportation in the engine bay.

Check Stock