Reviews24pin Power

SilverStone Technology Dual 24pin Power Supply Adapter for use of Two PSU at Once in Cryptocoin Mining PP10

The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply..
The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash..
It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage..
It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power..
Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface..

8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..

Apevia 600W Spirit ATX Gaming Power Supply with black sandblasted casing.
Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage.Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral, 1 x Floppy.
Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral, 1 x Floppy.
Auto-thermally controlled 120mm white LED fan. Output: [email protected], [email protected], [email protected], [email protected], [email protected].
Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections.

『14P+10P - 24P』14 Pin + 10 pin ports to plug into ATX Power Supply, 24 Pin port to plug into motherboard.
『Compatibility』Compatible with Corsair AXI/HXI series, RM(old type yellow lable), AX1200.(NOTE: only support 14 pin + 10 pin port PSUs).
『Compatibility』Compatible with all of 24 pin port motherboards.
『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(including connectors): 24.8-inch(63cm), Quantity: 1pcs, Self-adhesive tape*1pcs.
『Note』This cable was only designed for the brand and model as listed. If you connect it with other incompatible power supply, it will burn or damage the PSU or motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.

20+4 Pin Main Power Connector. Works With Both 20 And 24 Main Connectors. Replacement power supply features ability to adapt to both 20 and 24 pin motherboards for increased compatibility..
Compatible with HP S5000 Series, as well as many other models. Replaces Bestec, AcBel, and Delta power supplies..
2 x 4-Pin Molex. Additional connectors for increased compatibility..

Dual PSU Power Supply 24 Pin (20+4) ATX Motherboard Extension Cable, 12 inch/ 30cm..
Allowing you to connect an additional PSU to your ATX motherboard.
Compatible with 24 pin and 20 pin ATX motherboards (1x 24 pin(20+4) male port and....
Both PSU will be powered up by one single motherboard. Use a second PSU to power multiple graphics cards.
Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Reminder: If there are pins off, you can plug back in the direction of the slot, does not affect the use!.

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..