Reviews25 Mm Air Chamber

Absolute USA VEGD12+ Dual 12' Universal Vented Ported sub Box Subwoofer Enclosure

  • Universal Fit Dual Chamber 12" Vented Ported Car Sub Box Subwoofer Enclosure.
  • 15MM MDF Black Carpet with Speaker Terminal Competition Grade High Performance Subwoofer Box Engineered to Sound Incredible.
  • Machine precision cut mounting holes. Top of the line Glue for extra durable adhesion. High quality Splver spring loaded terminals. Designed, tested, and engineered to work with most of today’s popular woofers..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
  • Premium Silver Push Spring Loaded Terminal Cups.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

4\ Axial Exhaust Fan, HoseVary 3000RPM 120mm DC Dual Ball Bearings Air Exhaust Vent Muffin Fan for DIY Cooling Project (120mm to 4\ Duct Adapter)

  • PWM VARIABLE SPEED: The speed is adjusted from 0%~100% by manual controlling of the dimmer.Equipped with the PWM controller, directly connect with the female socket of fan and select the desired speed level will start it..
  • QUIET & AGING-RESIST: The measurement of noise level is carried out in an anechoic chamber with the microphone positioned 1 meter from the air intake. Testing fan shall be hung in clean air . Noise background<18dB . The average service life of the fan can be estimated when 90% of the fan can operate normally after aging under the rated voltage,25℃,65%RH dust-free environment.
  • MULTIPLE-APPLICATION: To meet the various applications as need, the kit included two ducting ends to mount in round pipes, such as growing tent, 3D laser experiment, 3D cutting ventilation, 3D spray paint to exhausting bad airs or help cooling. Using directly with the casing fan by two sides of mounting meshes equipped in any small areas or square pipes..
  • PRACTICAL KIT: Package included: 1 * DC12V Axial Fan (120x38mm),1 * 3V~12V US Plug Power Adapter, 2 * Metal Ducting Adapters (for 4-inch hose / pipe), 2 * Black Metal Meshes, 8 * Fastened Screws , 1 * English / Japanese User Manual. The "Hose Vary" team will response within 24-hour reply and....
Check Stock

PTSLKHN 5 Pairs of Eyeglass Nose Pads, Upgraded 15x8mm Soft Silicone Air Chamber Glasses Nose Pads, Screw-in Nose Pads Replacement Kit

  • Product Contains: 5 pairs of screw-in air chamber nose pads, 10 universal screws for nose pads, 1 piece 3-in-1 micro screwdriver..
  • These high-quality silicone nose pads are soft, are comfortable with no bad smells, and feature an air chamber design that helps to evenly distribute pressure and keep your glasses in place..
  • The upgraded hard-core design features a plastic backbone that is embedded in the nose pad, making it more stable and less likely to fall off. Diameter 1.0 standard stainless stee screws for normal nose pads replacement..
  • This 3-in-1 screwdriver has three different heads: 1.7mm Phillips, 1.7mm flat, 2.5mm Hexagon. The Phillips is perfect for eyeglass nose pad and frame screws removal, flat and Hexagon for backup, just in case..
  • We want you to be happy with your purchase. If you're not satisfied with your purchase, please contact us for a full refund or replacement..
Check Stock

Missouri Meerschaum - Missouri Pride Corn Cob Tobacco Pipe - 5th Avenue Straight Bit

  • The Legend is the best-selling corncob pipe in the world from the oldest and largest corncob pipe makers since 1869.
  • Smooth polished bowl with a coating that gives it a soft yellow color.
  • Available in 5th Avenue bowl shape with an amber straight bit that accept 6mm filters.
  • Approximate Dimensions: Length: 6", Bowl height: 1.75", Chamber diameter: 0.75", Chamber depth: 1.25".
Check Stock

BVV 10\ Vacuum Chamber Digital Heat Pad

  • 10Vacuum Chamber Digital Heat Pad Please Read Before You Buy! Chamber NOT Included, Sold Separately..
  • Heat Pad must fit correct size of the chamber! Fits 2&3 Gallon aluminum pots and 1.6 Flat Chamber This Digital Heat Pad will adhere to the bottom of a chamber vessel with a peel and stick backing. This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
  • This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
  • The temperature offset must be found to set the controller accurately..
Check Stock

BBox E10SV Single 10' Vented Carpeted Subwoofer Enclosure

  • Pro Tuned 10”Single Vented sub woofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for high power or sound quality sub woofers..
  • CNC Miter & Dado design and construction for the ultimatein air tight precision fit of all parts which ensures a rattle and noise free environment..
  • Recessed Side Panels increases structural integrity,eliminates unwanted flex and vibration..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying processand help assure a no-leak, no-rattle air chamber..
  • Enclosure Dimensions Sub cut out:9.125”, mounting depth: 11.5”, Height: 11.75”, Width: 16.25”, Depth: 15.25”.
Check Stock

Skar Audio SK1X10V Single 10' Universal Fit Ported Subwoofer Enclosure

  • Universal Fit - Single Chamber 10" Ported Subwoofer Enclosure.
  • Competition Grade, High Performance Subwoofer Box | Engineered to Sound Incredible.
  • Kerf (Rounded) Port Design - Allows for Deep, Accurate, and Responsive Bass.
  • Internal Air Space: 1.25 ft³ | Tuned @ 39 Hz.
  • Subwoofer Hole Cut-Out Diameter: 9.25" | Mounting Depth: 10.25".
  • Premium Push Terminals with Internal Speaker Wire Leads Ready For Installation.
Check Stock

SKB 3I-4214-PL iSeries 4214 Parallel Limb Bow Case (Black)

  • HEAVY-DUTY DOUBLE WALL PROTECTION PROUDLY MADE IN THE U.S.A.: The case features blow molded construction that safeguards your bow with two HDPE walls encasing an internal air pocket for ultimate shock and impact defense..
  • TWO-LEVEL STRAPLESS STORAGE DESIGN: Featuring a unique two-level, strapless shelving system, bows independently rest in a fixed position on a removable foam tray while arrows and a quiver are stored in a separate, protected compartment underneath..
  • INDEPENDENT ARROW AND QUIVER STORAGE: The case has a customizable arrow storage chamber for up to (10) arrows with foam for protecting attached broadheads. Additional storage space for quiver..
  • LOCKABLE AND AIR TRAVEL SAFE: The Safe Shot Double Wall Bow Case is lockable and meets TSA and airline requirements for air travel with your bow..
  • FIT & SPECIFICATIONS: Fits most bows up to 39" cam to cam and 13" limb pocket to draw string dimensions (with stabilizer removed). Internal dimensions: 40.625" L x 14.4375" W x 6" D / External dimensions - 43.25" L x 18.25" W x 7.25" H..
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock