Reviews25 Years Diode Module

GE WB27X10930 Genuine OEM High-Voltage Diode for GE Microwaves

The GE Appliances WB27X10930 High-Voltage Diode is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact....
Replacement GE Appliances Microwave High-Voltage Diode is an electrical current control device.
GE Appliances WB27X10930 Microwave High-Voltage Diode has approximate measurements of L: 3.5" x W: 0.25" x H: 0.25".
High quality GE Appliances OEM WB27X10930 Microwave High-Voltage Diode is manufactured with premium materials for durability and exact fit, be sure to....
Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.

Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
Terminal driver part of the supply area VMS: +5V ~ +35V.
Drive part of the peak current Io: 2A / Bridge.
Logical part of the terminal power supply range Vss :4.5-5 .5V.
Logical part of the operating current range: 0 ~ 36mA.
The control signal input voltage range: 4.5-5.5V low 0V high.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..

Check Stock

Fast Recovery Diode Module Full Crimped Structure MURP400100CI 100A 20V -55~150℃ Rectifier Diode Module

【AC 2500V】The chip is electrically insulated from the backplate, 2500V AC voltage.
【Specification】Forward Average Current IF (AV): 100A.
One-Cycle Forward Non-repetitive Surge Voltage IFSM: 20V.
【Full Crimped Structure】 Full crimped structure with excellent temperature characteristics and power cycling capability.
【Long Service Life】This Recovery Diode Module is made of high quality material, durable and long service life..
【Easy to Use】 Simple installation, easy to use and maintain. High quality and great processing, perfect replacement for the old one.

Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
Aspherical glass lens provides tight Dot Laser in large temperature range..
Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..

Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

Check Stock

Fluke 3000 FC GM Wireless General Maintenance System Multimeter

Wireless general maintenance system kit with a digital multimeter, voltage modules, and flexible current module and probe for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequency.
Modules can be connected to a test point, and results can be viewed up to 20 meters away on the multimeter.
Kit includes a 3000 FC series wireless multimeter.
A3001 FC wireless iFlex AC current module.
The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting.

Check Stock

UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws.
the plastics case keep the module free from dust and water, which is available for more applications than the separate module..

Check Stock

DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply

output voltage range is DC 0.5-30V, can be arbitrary adjustable.
output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
max output power is 35W, if enhance dissipation, it can reach 50W.
LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
used as a high-power LED constant current driver module.
DIY a solar power controller, Battery Charging.
Output ripple is small and πfilter is available.Thick heat sink .Buck-boost Integrated.

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..

Check Stock

Hopcd Microwave Sensor Switch, 3.7GHz Microwave Sensor Body Motion Detector/Smart Light Switch for Corridor Embedded Ceiling Mount,

This product is a 3.7GHz microwave induction mobile module, which can effectively detect objects moving inductively..
The module has a main control chip with a built-in high-precision algorithm unit, which can effectively filter out environmental interference..
Good stability, strong anti-interference, wide sensing range and high sensitivity..
The control signal output delay time is adjustable and accurate..
An externally connected photosensitive diode prevents the product from working during the day (it can also be adjusted to work during the day)..

Check Stock