Reviews27mm Nozzle

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend，Black

Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
Application: Accept Nozzle with M6 screw thread for Reprap.

Check Stock

TAMIYA Spray-Work Hg Trigger Type Air Brush System

Extra-Fine Brush x1 (Brush: 12mm length x 2mm dia..
total length: 100mm). Features durable PBT bristles and an easy-to-handle stainless steel wire stem. It's ideal for cleaning narrow spaces such as the airbrush nozzle..
Standard Brush x1 (Brush: 12mm length x 7mm dia..
total length: 100mm). Utilizes PBT bristles and a stainless steel stem with grip. Efficiently cleans the paint cup after use..
Sealant tub x1 (Contents: 3g). The sealant ensures that air does not escape from any gaps at the base of the nozzle. It does not solidify, allowing cleaning and reapplication as necessary..
High-viscosity grease tub x1 (Contents: 7g). This grease is for use in maintenance of the trigger button stem, its viscosity ensures smooth and controlled movement of the trigger and paint application..
Nozzle wrench x1. This wrench is compatible with all Spray-Work series airbrushes, and is used to remove the nozzle without damage..

Check Stock

Orbit 10106H Misting Nozzle

* Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
* Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
* Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
* There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
* Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..

Check Stock

BANG4BUCK Professional HVLP Gravity Feed Air Spray Gun, 1.4mm 1.7mm 2.5mm Nozzles, 1000cc Aluminum Cup with Gauge for Auto Paint, Primer, Clear/Top Coat & Touch-Up

1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
1x True Micrometer Air Regulator with Gauge.
This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting. Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications..
Please Note: The pre-installed nozzle will be tightened to ensure the air tightness. While removing the nozzle, it may need some effort to disassemble.
Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..

Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Check Stock

Vacuum Attachments Replacement 1 1/4 inch & 1 3/8 inch Vacuum Cleaner Accessories Brush Kit for Standard Hose Set of 6

The Vacuum Attachments pieces come with an 1-3/8''(35mm) to 1-1/4''(32mm) hose adapter ,NOT fit Shark Lift Away Vacuum Cleaner ,NOT fit Bissell style 12,NOT fit the Shark vacuum,NOT fit shopvac. NOT fit Kenmore vacuum.NOT fit Bissell Powerforce，NOT fit on Miele vacuum cleaner.
1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board..
1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
The small vacuum attachments set includes 32 mm(1 /1/4 inch) & 35 mm( 1 3/8 inch) Hose Adapter, 1.25" ( 32mm) horsehair Brush, 1.25" ( 32mm) upholstery tool, 1.25" ( 32mm) utility nozzle with brush, 1.25" ( 32mm) brush & nozzle combination tool, 1.25" ( 32mm) crevice tool,Please measure and confirm your vacuum attachments outside diameter before purchasing.

Check Stock

1 1/4" Vacuum Attachments Brushes for Small Shop Vac Accessories 1/4 inch or 1 3/8 inch Vacuum Cleaner Accessories

...should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm.
1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board.NOT for shark vacuum attachments,DON’T for hoover vacuum attachments,DON’T fit the OEM hose,Not for rigid vacuum,DON’T fit dewalt shop vac,DON’T fit Dirt Devil model .
1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
Vacuum cleaner accessories set includes 1.25" brush & nozzle combination tool, 1.25" round brush, 1.25" flexible flat suction nozzle, 1.25" upholstery tool brush,1.25" utility nozzle with brush, 1.25" crevice nozzle tool. High quality. Easy to install.Easy to clean..

Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
Nozzle Throat Tube: Material - Stainless Steel.
0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.

Check Stock

Magic&shell Ceramic Sandblast Nozzle 10PCS Air Sandblaster Tips For Pneumatic Blasting 5mm and 6mm Inner Diameter

Product Name: Ceramic Nozzle.Material: Ceramic..
Outside diameter:15mm/0.59Inch.Bore diameter: 6mm/0.24Inch,5mm/0.20Inch.Length: 38mm..
Color: Pink.Package Includes:5 PCS 5mm Inner Diameter Ceramic Nozzle,5 PCS 6mm Inner Diameter Ceramic Nozzle..
Strong wear resistance, long life, cost saving, good electrical insulation at high temperature..

Check Stock

Huanyu Single-Pump Electric Desoldering Gun Desolder 100W Lead-free Soldering Tin Gun Vacuum Pump Solder Sucker Soldering Welding Tool for DIY Electronic Repair Work (110V Model, S-993A Single-pump)

【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds..
【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation. NOTE:Suction nozzle:Default φ1.0mm nozzle. φ1.5mm and φ2.0mm nozzles are optional, please contact us if you need..
【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle. NOTE:Suction nozzle:Default φ1.0mm nozzle. φ1.5mm and φ2.0mm nozzles are optional, please contact us if you need..
【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage..
【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn..

Check Stock

Big Autoparts 1000cc Aluminum Cup with Gauge Air Spray Gun,HVLP Gravity Feed Air Spray Gun,1.4mm & 1.7mm & 2.5mm Replaceable Nozzles,Suitable with Auto Paint, Primer, Clear/Top Coat & Touch-Up

1x True Micrometer Air Regulator with Gauge.
HVLP gravity feed spray gun fast and accurate equal atomization and particle size for all kinds of surface painting.Max pressure 90 psi and 1.4mm 1.7mm, 2.5mm Replaceable nozzle apply for automotive for base coats, clear coats, single stage, primers, door, trim, as well as house paint or other applications..
Paint gun nozzle is made of high purity brass to create 10 holes, the atomization is more delicate and the area is larger.Each air spray gun is equipped with a fine nozzle size that is perfect for applcations and projects around the house..
Primer gun spray medium viscosity paint coating materials, such as high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc..
Each primer paint gun control knobs for full adjustment over spray pattern, fluid control and air pressure..

Check Stock