Reviews28mm Nozzle

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

Paint Sprayer, Airless Paint Sprayer, High Power HVLP Spray Gun with 3 Nozzles Needle Cap Spray Gun, Spray Paint Gun for Furniture, Fence, Car, Boats, Bicycle, Garden Chairs, 600ML Paint Capacity

  • 【High Capacity HVLP Spray Gun Kit】This is a HVLP paint spray gun with 600ml capacity great for furniture surface, car primer, painting,wall painting, art craft, automotive paint, base coatings, meet most of your scenarios..
  • 【3 Nozzle and 3 Needle】In order to achieve the effect of spraying, we will give three additional replaceable 1.4mm 1.7mm 2.0mm nozzle needle caps in this hvlp spray gun set, you can change different nozzle sizes in different painting projects with different needs, which can fully meet your needs, which will make your work more efficient..
  • 【Adjust the Flow Rate】 High atomization gas pipeline design, come with three adjustable valve knobs for precise coating applications,which have good atomization effects and fast decorative effects. It sprays most types of finishes on evenly and without brush marks, suitable for edges, corners and broad interior surfaces of various work and DIY projects..
  • 【Premium Quality】 Materials of the needle and nozzle of the HVP spray gun are made of high-quality stainless steel, which is sturdy and durable, can be used for a long time, wear-resistant and scratch-resistant.Professional gravity Feed HVLP Spray Gun with 3 fluid Tips 1.4mm, 1.7mm, 2.0mm. Allowing you to paint for a nice wide spectr....
Check Stock

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend，Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock

150259 Pulldown Faucet Hose Compatible with Moen Kitchen Faucets, Replacement Spray Hose for Pull Down Kitchen Faucet 68 Inch (Fits in Place of 150259 & 187108 Faucet Hose)

  • Suitable for bathroom faucet, tub, kitchen faucet, salon shampoo, laundry room faucet and garden sink nozzle. We provide 5 adapters for different installation options..
  • Adapter sizes: female 20mm (25/32"-27T), female 22mm (55/64" -27T), Female G1/2 for laundry and utility faucet. Male 24mm (15/16"-27T), male 26mm (33/32"-27T), male 28mm (9/8"-27T)..
  • Easy to install. Unscrew the current aerator from your faucet, attach on the diverter, then connect hose with sprayer. Switch on the faucet to check water flow between faucet and showerhead..
  • Package includes: shower head, T-way faucet diverter with aerator, 5 adapters, 5ft stainless steel hose of G1/2 connectors, shower holder (self adhesive adjustable).
Check Stock

TAMIYA Spray-Work Hg Trigger Type Air Brush System

  • Extra-Fine Brush x1 (Brush: 12mm length x 2mm dia..
  • total length: 100mm). Features durable PBT bristles and an easy-to-handle stainless steel wire stem. It's ideal for cleaning narrow spaces such as the airbrush nozzle..
  • Standard Brush x1 (Brush: 12mm length x 7mm dia..
  • total length: 100mm). Utilizes PBT bristles and a stainless steel stem with grip. Efficiently cleans the paint cup after use..
  • Sealant tub x1 (Contents: 3g). The sealant ensures that air does not escape from any gaps at the base of the nozzle. It does not solidify, allowing cleaning and reapplication as necessary..
  • High-viscosity grease tub x1 (Contents: 7g). This grease is for use in maintenance of the trigger button stem, its viscosity ensures smooth and controlled movement of the trigger and paint application..
  • Nozzle wrench x1. This wrench is compatible with all Spray-Work series airbrushes, and is used to remove the nozzle without damage..
Check Stock

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

Caulking Nozzles, CHARMINER Caulk Nozzle Applicator, Reusable Caulking Nozzle 14 Pcs, Stainless Steel Sealant Caulking Finishing Nozzle for Kitchen Bathroom Window Sink Joint(Silver)

  • Fills Gaps Perfectly45muzzle design can easily smooth and fill gaps perfectly without causing chaos and uneven finishes. Caulking finisher can save a lot of time.
  • 14 Variety of SizesCaulking finisher kit comes with 14 different sizes that can easily satisfy sealing requirements in different areas and angles. Dimensions: 5, 6, 7, 9, 10, 12, 13, 16, 20, 25, 26, 28, 30, 35mm.
  • Good Tightness and ReusableMade of high-quality stainless steel, making it wear-resistant, not brushed, anti-corrosion, durable. The caulk nozzle finisher is easy to clean and reusable.
  • Wide Application The caulking tool set can be used for kitchen, bathroom, tank, door, window, kitchen, sink joint filling finishing.
  • Great DesignThe caulk nozzle applicator is a duckbill design, smooth and beautiful glue. Suitable for Most Areas and Angles.
Check Stock

BANG4BUCK Professional HVLP Gravity Feed Air Spray Gun, 1.4mm 1.7mm 2.5mm Nozzles, 1000cc Aluminum Cup with Gauge for Auto Paint, Primer, Clear/Top Coat & Touch-Up

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting. Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications..
  • Please Note: The pre-installed nozzle will be tightened to ensure the air tightness. While removing the nozzle, it may need some effort to disassemble.
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock