Reviews2dodge Durango Fuel Pump

Carter Universal Electrical Fuel Pump Automotive Replacement 12V (P90091)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • VEHICLE FIT: Electric fuel pump fits: Audi 100 Series 1974-1971, Fox 1974-1973, Super 90 1972-1971, Austin America 1972-1968, Marina 1975-1973, BMW 2.8 Bavaria 1971, 3.0CS 1974-1971, 3.0CSL 1971, 3.0S 1974-1971, 1600-2 1967-1966.
Check Stock

Fuel Pump Removal Tool, Fuel Pump Module Spanner Wrench 3/8' to 1/2' Universal Fuel Pump Lock Ring Tool, Adjustable Fuel Pump Lid Tank Cover Wrench

  • MADE OF HIGHT QUALITY STEEL:Fuel tank cover spanner adopts high quality steel forging, overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use..
  • APPLICATION: Fuel pump cover spanner is used for vehicle removal and installation of fuel pump retaining rings that attach the fuel pump module to the fuel tank. Fuel pump module spanner wrench fits most plastic retaining rings. Compatible with vehicles equipped with silent fuel tank lids..
  • GENERAL MODELS: Suitable for Mercedes-benz, for BMW,for Audi,for Volkswagen,for Toyota,for Honda,for Nissan,for Citroen and other vehicles with plastic fuel pump lock ring..
  • ADJUSTABLE: The fuel pump lid tank cover wrench fits different fuel tank lids and can be adjusted from 3/8" to 1/2" (38mm to 168mm) ratchet drive..
  • DESIGN FEATURES: The curved foot design is more suitable for the installation surface of the oil pump cover to ensure that it is not easy to slip off during operation. The four sides are rounded, and the two hands are respectively held at both ends of the beam to twist the remover, so that it is not easy to hurt the hands when operating with both hands..
Check Stock

Mini Micro Water Priming Gear Pump Dc 3-12v Sinking Pump Waterproof A1

  • GOLD MEDAL PERFORMANCE: The M-150S fuel transfer pump is independent lab tested and has received the Gold Medal Performance Award for delivering three times more operating hours than our leading competitor's comparable pump..
  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our fuel transfer pump is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. This economy pump comes with the standard nozzle cover and is ideal for applications where accessories are already available. Pump only for direct fuel tank mounting..
  • 2-YEAR WARRANTY: Our M-150S GPI fuel transfer pumps come with a 2-year warranty and are UL Liste....
Check Stock

47-559-11-S Fuel Pump for Kohler K341 K301 K241 Engine Magnum Series M10 M12 M16,4755911S Fuel Pump Replace 12-559-04-S 4755901-S 4755903 4755904-S 4755911-S 47-559-04S 47-559-11S By TOPEMAI

  • 47-559-11-S Fuel Pump Replaces Obsolete Part Numbers: 4755901-S, 4755904-S, 4755910-S, 47-559-02-S, 47-559-01-S, A-235845-S and A-235807-S.Replace Kohler 12-559-04-S,47 393 19-S,47 393 61-S,47 559 04-S,47 559 11-S..
  • 47-559-11-S Fuel Pump compatible with Kohler engine:K301-47722 K301-47725 K301-47726 K301-47730 K301-47731 K301-47745 K301-47746 K301-47755 K301-47762 K301-47765 K301-47766 K301-47769 K301-47770 K301-47771 K301-47813 K301-47814 K301-47828 K301-47831 K301-4775 K301-4780 K301-4773 K301-4784 K301-4786 K301-4794 K301-4795 K301-4796 K301-4797 K301-4798 K321-10202 K321-10210..
  • 47-559-11-S Fuel Pump compatible Kohler engine:K241-46428 K241-46429 K241-46430 K241-46431 K241-46432 K241-46433 K241-46434 K241-46439 K241-46443 K241-46444 K241-46446 K241-46447 K241-5105A K241-5106A K241-5107A K241-5108A K241-5109A K241-51100A K241-51100C K241-51100D K241-51100E K241-51101A K341..
  • 47-559-11-S Fuel Pump fits for Gravely 38789,John Deere AM134269.AKA 12-559-04-S Fuel Pump,K341 Fuel Pump,K301 Fuel Pump,K241 Fuel Pump,K341 Fuel Pump Rebuild Kit..
  • K341 Fuel Pump compatible with Kohler Magnum Series Engine:M10-461524 M10-461543 M10-461550 M10-461551 M12-471525 M12-471529 M12-471534 M12-471535 M12-471559 M12-471567 M12-471568 M12-471573 M12-471574 M12-471575 M12-4....
Check Stock

Electric Fuel Pump Assembly Replacement for Ford F250 F350 Super Duty V8 6.2L 2011-2016 E2582M

  • 8.1L Fuel Pump Part Number:21608512, 3589016, 3594785, 21397772, 21545139..
  • Electric Fuel Pump Replacement for: Volvo Penta Stern 8.1L engines: 8.1GiCE-J, 8.1GiCE-JF, 8.1GiCE-M, 8.1GiCE-MF, 8.1GiCE-P, 8.1GiCE-Q, 8.1GiC-J, 8.1GiC-JF, 8.1GiC-Q, 8.1GiE-J, 8.1GiE-JF, 8.1GiE-K, 8.1GiE-KF,See more details below..
  • Function:Marine fuel pumps are necessary for engine operation.High pressure fuel pump is the interface between high pressure oil circuit and low pressure oil circuit. Its function is to generate fuel pressure in the common rail by controlling the fuel output. In any case, it is primarily responsible for providing sufficient high pressure fuel to the common rail..
  • Premium quality:The Fuel Pump Assembly wear out can greatly affect the way your motor burns fuel, and subsequently, how much power your engine generates. Once a part of a boat fails, it's obviously too late to fix it. For your boating performance, the fuel pump assembly is one component you can't ignore.Please choose CARMOCAR Fuel Pump Assembly..
  • About service:The CARMOCAR customer service period is 1 year.Not....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

12V Gasoline Fuel Transfer Pump Kit, 15 GPM / 57 LPM Self-Priming Fuel Pump, 14' FT Discharge Hose, Extensible Suction Tube, Manual Nozzle and Power Cord, for Gasoline Diesel Kerosene Mineral Spirits

  • STRONG POWER - This Fuel Transfer Pump Kit features a Self-Priming 12V DC Rotary Vane motor with a flow rate up to 15 GPM / 57 LPM. Max. Lift is 20 Feet..
  • WIDE APPLICATION - This fuel transfer pump is designed as a Class 1 Division 1 Group D T4 Explosion Proof Pump, suitable for flammable liquids like: Gasoline, Diesel, Kerosene & Mineral Spirits..
  • RELIABLE & SAFE - This upgraded fuel pump is equipped with thermal overload protection automatic stop device, which makes fuel transferring more reliable and safer. Constructed of heavy duty cast iron for long time use..
  • EASY TO USE - The compact size and simple installation of the pump kit are designed for making transfer fuel easy. This pump is ideal for mounting on fuel storage tanks, and for cars, trucks, tractors & agricultural applications. Note: Use PTFE tape on ALL pipe threads when assembling..
  • SPECIFICATIONS - This Fuel Transfer Pump Kit includes 15GPM Fuel Pump, 14' Discharge Hose, Extensible Suction Tube, Aluminum Manual Nozzle w/ lockable Holder and Power Cord. Recommended Duty Cycles: 30 min on & 30 min power-off cooling phase..
Check Stock

Carter Universal Electrical Fuel Pump Automotive Replacement 6V (P4259)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
Check Stock

Amhousejoy Fuel Pump Fit for Kawasaki 49040-7001 15-25 HP 17-25 HP Engines

  • Fuel Pump Fits for 49040-7001 for KAWASAKI engine.
  • Fuel Pump Fits for KAWASAKI 49040-7001 / for Honda 16700-Z0J-003 fuel pump assembly 15-25 HP.
  • Fits for fuel pump for KAWASAKI FX850V, Most FH Series and FD Carbureted Engines.
  • Quality Assurance: You can get a replacement or full refund if our product was damaged in 90 days. If you got any problem please contact with us and we will reply to you ASAP..
  • Package includes 1pc 49040-7001 fuel pump.
Check Stock

Carter Electrical Fuel Pump Automotive Replacement 12V (P4601HP)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock