Reviews2ford F15spindle

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Kidco Y Spindle 2 Pack

  • For installation of a pressure-mounted gate on a staircase with balusters on both sides, you will need to use a K100 Installation Kit..
  • On all Gateway Models, the Y Spindle can be used on either side of the gate. Simply swap out the included padded spindles for a Y spindle on as many corners as is needed..
  • Many homes have staircases that aren’t bordered by a wall. In this situation the Y Spindle aids installation of the pressure mounted gates to these types of staircases..
  • The Y Spindle wraps around the baluster to provide a secure installation.
Check Stock

Revolution Fibers Artisan Top Whorl Drop Spindle for Beginner & Advanced Hand Spinning - 11 inch Shaft | 3.25 inch Whorl Diameter | Satin Finish | Hand Crafted Rosewood Flora | Spin Roving into Yarn

  • Hand carved from beautifully turned Rosewood, the Revolution Fibers Top Whorl Drop Spindle is a tiny tool that can turn an evening by the fire (or by the TV) into a productive yarn making session. It's a simple, cheap, and portable way to get your hands busy and make something beautiful (and functional) at the same time. This Top Whorl Drop Spindle is exactly what you need to make your own yarn from any type of fiber..
  • Drop Spindle shaft is 11 inches long (12" total length), notched whorl is 3.25 inches in diameter.
  • The 3.25 ounce drop spindle is designed with, both beginners and the veteran spinning enthusiast in mind. It's ideal for many different types of yarn weights, from Baby to Worsted and countless fibers, including wool, cotton, alpaca, sari silk, and more!.
  • The hand spindle remains one of the most productive, versatile, and convenient tools for creating stunning custom yarns from home. Get started on your hand spinning journey today with this timeless, durable handmade heirloom tool.
  • Our elegantly handmade Revolution Fibers Handcrafted Drop Spindles are well-balanced, lightweight, durable wooden spindles with a strong brass wire hook opposite the whorl notch, used to “park” your yarn. Our durable Rosewood Drop Spindles have a sati....
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

aohua Center Console Dashboard Vinyl Wrap Cover Gloss Carbon Fiber Interior Pre-Cut Armrest Console Panel Protective Decoration Sticker Accessories for BMW X5 F15 X6 F16 2014 2015 2016 2017 2018

  • Complete wraps kit accessories custom cut to fit all BMW X5 F15 X6 F16 2014-2018. This pre-Cut vinyl film wrap kits has been custom designed to be easily applied over your stock center console,cup holder,dashboard,door handle,door sill scuff guard etc..
  • Upgrade the center console and dashboard: Keep scratches, smudges, fingerprints and dust off your BMW X5 F15 X6 F16 2014-2018 with the simple way. Made of durable vinyl in gloss black, this wrap can protect your center console, also seamlessly blends into your BMW X5 X6 interior with a premium finish..
  • Material: Durable PVC materialhigh-strength & high stability: RESISTANT from wrinkle, wear, water, corrosion, high and low temperature.No bubbling and curling after installation..
  • Carbon Fiber Pattern: Exquisite textured 5D gloss carbon fiber pattern,gloss black smooth surface.Special carbon fiber sticker decoration parts that keep your vehicle unique and eye-catching, instant upgrade the appearance.Freshen up the interior of your car with this car sticker accessories..
  • Easy Installation: No damage installation,No curling problem, you can peel it off and reapply if necessary,traceless backing adhesivesticky enough(highly recommend to use heated gun during the installation) but leaving no residue when peeled....
Check Stock

CCIYU Mower Spindle Spindle Assembly fit for MTD for CUB CADET for TROY-BILT: 618-06977, 618-06977A, 918-06977, 918-06977A; for OREGON: 82-105; for STENS: 285-700

  • COMPATIBLE MODELS:The Spindle Assemblies fit for CUB CADET: XT1-LT46, XT1-LT46 EFI FAB, XT1-LT46 FAB, XT1-LT46 KH, XT1-LT46 KH Carb, XT2-LX46, XT2-LX46 EFI, XT2-LX46 EFI FAB, XT2-LX46 FAB, XT2-LX46 KH, XT2-LX46 KH FAB, XT2-LX46 KW, XT2-LX46 LE FAB.
  • for MTD: 247.20442 T8200, 247.27039 T8600, 247.27042, 247.270421 T8200, 247.27049 T8200, 247.270491 T8200, 247.27333 T3100, 247.27391 T2800.
  • for TROY-BILT: LT FAB46, Super Bronco 46 Hydro, Super Bronco 46 XP, TB 2246 Hydro, TB2246.
  • THE IMPORTANCE OF LAWN MOWER SPINDLE: Spindle Assemblies are crucial parts for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing. The blades of your mower rotate around the spindles and if the spindles are bent or broken or if the bearings get worn down, your mower won’t operate as it should. Fortunately, you can replace the spindles or the spindle bearings yourself to fix your mower..
  • HOW TO STOP THE SPINDLE FROM MOVING WHEN TAKING LAWN MOWER BLADES OFF: Loosen the clamp on a blade removal tool by turning the handle counterclockwise. Place the removal tool over the end of the blade and the stopping edge over the side of the deck. Turn the handle clockwise to tighten it in place and prevent the spindle from turning..
Check Stock