Reviews2jetta Fuel Pressure Check

Cosmoska Red Aluminum Fuel Filter Cap w/ Pressure Port For Ford Power-stroke 6.0L 2003-2007

▶The aluminum fuel filter fits for 2003-2007 Ford Powerstroke 6.0L.
▶The oil filter cap will comes with schrader vavle, so you can tap right in to measure fuel pressure.
▶Made of high quality CNC Aluminum, with great strength and durablity, rust-resistant, anti-corrosion, no deformation and no fade.
▶It can be great replacement for the original plastic cap, comes with a test port which allows for a fuel pressure tester to be attached in order to properly check the fuel pressure.
▶Package Included: 1 x aluminum fuel filter cap, 1x fuel rated Schrader valve and 1x O-ring（If you find the schrader valve or the o ring is missing, please directly contact us, we will give you a satisfactory solution）.

Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....

Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

FAERSI Fuel Injection Pressure Test Kit - Universal Fuel Oil Engine Diagnostic Gauge Tester Set with Fittings, Instructions, Storage Case for Car Motorcycle Truck RV SUV & ATV, 0-100 PSI / 0-7 Bar

【Special Design】: Complete Universal Fuel Injection Pressure Tester Kit is designed to easily detect the fuel pump pressure on injector systems, and check if fuel pump is defective or inconsistent in pressure flow.【Note】Our all products have a 18-Month WARRANTY, if you received wrong tester kit or it doesn't work, please feel free to contact us and we will give you a REPLACeMENT or REFUND..
【Universally Compatible】: Suitable for any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
Ideal for petrol engines of American Motors, Boschs AFC, MPC European & Japanese (except CIS), Chryslers Corp., Fords Motor Co., GMs (except TBI), Japanese fuel injection systems and so on..
【Easy to use and Safety】: The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use 【NOTE】The Gauge kit don't include a push pressure release button..
【Easy to storage】: The Fuel Injection Pressure Tester Set with a ABS plastic blow-molded case can keep the tools organized, safe storage and easy to transport..
【Package Include】The Fuel Pressure Test Kit has all necessary fittings....

Check Stock

Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet

Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT..
Material: This small engine fuel line is made of high-quality NBR, which is oil resistant..
Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F..
Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase..
How To Use: Use hose barbs and fuel line clamps to install..

Check Stock

EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..

Check Stock

Universal Electric Fuel Pump Kit 12v 3-6 PSI Low Pressure with Fuel Filters 10 Hose Clamps 6.56 FT 5/16" ID Fuel Line Replacement For Carburetor Lawn Mower Gas Diesel Fuel Transfer Pump

...l 12 volt cars, trucks, carburetor, lawn mower, boats & generators.
Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp.
Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply.
Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly.
Upgraded Fuel Filter: Upgraded Filter Paper The number of pleats of the filter paper is dense, and it sticks firmly to the shell without gaps.
It can filter out impurities, dirt and fuel particles to prevent clogging of the carburetor, only allow clean fuel to flow in and keep the engine charged.
3-Layer Thickened Fuel Line: Length: 6.56 feet(2m), Thickness: 2.99mm.
Cold and High Temperature Resistance (-30°to 120°).
The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer....

Check Stock

3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Neoprene Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines

【Size】ID: 3/8" (10mm), OD: 2/3" (17mm), Length: 10FT..
【Working Conditions】NBR Fuel Hose Working Temperature Range: -40°F to 257°F. Working Pressure: 300PSI. Burst Pressure: 1160PSI..
【Premium Material】Made of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection..
【Applicable Medium】NBR Fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air, etc..
【Wide Application】NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase..

Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
Set includes a variety of adapters suitable for most vehicles.
Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
Steady, regular drop indicates that the valve is held open, burnt, or chipped.
Wide pressure fluctuation at high speeds indicates a weak valve spring.
Steady drop to zero pressure indicates a choked muffler.
EASY TO USE: Assembly and operating instruction manual included.
Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
Extra-long rubber hose and 14mm/18mm manifold adapter.

Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....

Check Stock

KUNTEC 0-140PS Fuel Injection Pressure Tester Gauge Kit Gasoline Gas Fuel Oil Injector Test Set for Auto Truck SUV Motorcycle

Universal Design: Adapters, hoses and fittings cover all fuel injection systems and most cars and trucks.
Pressure Gauge: Dual scale range 0-140psi (0-10 bar).
easy to read and provide you more precise and accurate readings.
Adapter: 7/16-20UNF, M14X1.5mm, M12X1.5mm, M12X1.25mm, M10X1mm, M8X1mm.
Application: This fuel pressure tester diagnoses variability problems caused by poor fuel pressure. Used to check if fuel pump is defective or inconsistent in pressure flow.
Duarablity: Made of high quality material (Brass, Steel, Rubber, Plastic), rugged and long-lasting.
Solid brass connectors. Excellent air-tightness and avoid any leaking.

Check Stock