Reviews2rmz 45valve Clearance

Protecting Vidalia

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Keg in the Closet

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

ABN 8in Valve Spring Compressor, 3-6.5in Capacity, 6in Clearance – Small Overhead OVH Engine Repair Compressing Tool

  • EASY COMPRESSION: The ABN Valve Spring Compressor Small Overhead OVH Engine Repair Compressing Tool allows you to effortlessly disassemble and reassemble valves.
  • For correctly fitting, installing, and removing automotive valve springs.
  • FITS YOUR VEHICLE: Suitable for small to medium engines with overhead valves.
  • Works with a cylinder head on your workbench or any OVH head removed from the block.
  • 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
  • GRIP COMFORTABLY: Molded and cushioned handle that will give you more leverage.
  • Automatic locking and an easy grip handle help you to keep the tool in place and gain slip-free leverage.
  • EASY TO USE: Close the clamp until the fork-type portion of the tool fits snugly on the spring cap and the screw pivot is on the valve face, then screw in the threaded rod to compress the spring.
  • Automatically locks in place and is simple to release, lift, and compress.
  • BUILT TO LAST: Constructed from high-quality metal that eliminates tool flex.
  • Strong and adjustable cam-action works perfectly in line with the valve and can get into even the narrowest valve chambers.
Check Stock

Valve Covers Aluminum for Chevy SBC 350 283 302 305 327 383 400 Engine Small Block (1958-1986)

  • [ Wide Applications ] - This engine valve cover fit for Chevy / for Chevrolet 283 302 305 327 350 383 400 1958-1986 Engine Small Block SBC.
  • Each cover has 1 1/4" baffled breather hole.
  • [ Package Contents ] - Complete set contents 1 pair engine valve covers with bolts as main picture shows.
  • [ Premium Quality ] - SBC valve covers are made of high quality aluminum material,can resist high temperature and prevent oil leaking. Stain oxidation surface finish,no deformation strong and durable,prolonged use life.
  • [ Direct replacement ] - Long bolt style adds slight inside clearance.Direct fit and easy to use,please contact us if you have any questions.
Check Stock

Trounistro 6 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4 5/16 3/8 Tubing

  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough....
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing,....
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time.
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation.
  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
Check Stock

Trounistro 4 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4 5/16 3/8 Tubing

  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing,....
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time.
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation.
  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
  • What you will get: you will get 4 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 2 adapters, 1 hex key.
Check Stock

CQYD 1016511 RPM REV Limiter for 1992-1996 Club Car DS Gas Golf Cart FE290 FE350

  • Cam Phaser Limiter Kits for 4.6L/5.4L Modular 3 Valve Ford Engines, 2005 and newer.
  • Restrict the range of cam timing to provide necessary valve clearance for performance camshafts.
  • Aid in creating serious upper rpm horsepower gains without sacrificing any bottom end or mid-range performance.
Check Stock

Fumoto Oil Drain Valve F106N

  • F-Series FUMOTO Valve with Long Nipple and LC-10 Lever Clip for M16 - 1. 5.
  • Allows for clean and mess free oil changes.
  • Standard length nipple for easy hose attachment.
  • Eliminates stripped threads and frozen plugs.
  • An extension adapter may be required in order to install this valve for some vehicles.
  • Remember to tighten at the body, NOT the nipple.
  • NOT recommended for low ground clearance vehicles.
  • Follow FUMOTO torque specs. To install adapters always under-torque.
  • Please CONTACT FUMOTO with any issues or questions you may have.
Check Stock

maXpeedingrods Aluminum Valve Covers for Ford BBF 429 460 Engines V8 Big Block 1968-Up

  • [ Wide Applications ] - This engine valve cover fit for Ford 429 and 460 V8 engines Big Block 1968-Up.
  • [ Tall Style Design ] - The valve covers are tall styles, so roller rockers and double ear straps can be removed. Long bolt style adds slight inside clearance.
  • [ Good Sealing ] - These have a 1/4 inch thick aluminum gasket guide, which achieves a perfect seal every time. 3.8" Exterior Height,3.6" Interior Height,2.78 Baffle Height.
  • [ Premium Quality ] - Made of high quality aluminum material,can resist high temperature and prevent oil leaking. Stain oxidation surface finish,no deformation strong and durable,prolonged use life.
  • [ Direct replacement ] -The package contents 1 pair engine valve cover with bolts.Direct fit and easy to use,please contact us if you have any questions.
Check Stock

BBK 1506 3/8\ Phenolic Intake Manifold Spacer Kit for GT-40 and Cobra EFI Intake Manifolds

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock