Reviews2xtube Steel 2

Commerical Commercial Deep Fryer with 2 Baskets 3 Tube Stainless Steel Natural Gas Floor Fryers for Restaurant French Silver 3 Burners Natural Gas FCFS-40-NG 0

  • 23800 BTU NATURAL GAS MODEL Total : 16 lt. capacity ( 2 COMPARTMENT DUAL TANK / 8 LT + 8 LT ) Commercial Countertop NATURAL GAS Deep Fryer !! Baskets and Lids included !!.
  • Manufactured from High Grade Stainless Steel. !! COMMERCIAL TYPE !! CE CERTIFIED.
  • !! WE SHIP TO THE WORLDWIDE !! Made in Turkey.
  • 2 COMPARTMENT DUAL TANK 8 + 8 Liters TOTAL 16 LITERS CAPACITY High Grade Stainless Steel 2 X Stainless Steel Fryer Baskets Suitable for professional use. High precision Manual Heat Setting Knobs. Removable Stainless steel oil tanks. Removable-handled baskets. Stainless steel body. 2X Stainless Steel lids. ignition buttons ( Red Color ) Size: W: 66 x L: 57 x h: 41 cm , CE certified.
  • 2X Stainless Steel Fryer Baskets,and 2X Stainless Steel Lids INCLUDED !! FULL SET !!.
Check Stock

DuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Rainbow Attic Stair Prestige Telescoping Attic Ladder Orange

  • Powder coated steel stair components, Styrofoam insulated door with melamine finish on both sides, Melamine finished MDF frame with built-in steel trim.
  • Self adjusting stair rise, Weather stripping to reduce drafts and air leaks, Simple installation with specialized steel hangers.
  • Stair operates with pole and hook, Includes reversible steel telescoping handrail, steel grab handles at the stop of the stair, and protective floor bumpers.
  • Rough opening dimensions: 22 1/2" x 54", Stair frame dimensions: 22" x 53 1/2", Floor to ceiling height range: 9' - 10" to 11' - 6".
  • Tread width: 12", Tread depth: 4 1/2", Weight capacity: 350 lbs., Unit weight: 120 lbs..
Check Stock

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

Cuisinart MCP194-20N MultiClad Pro Stainless Steel 4-Quart Saucepan with Cover & MultiClad Pro Stainless Steel 1-1/2-Quart Saucepan with Cover

  • Product 1: Updated cast-stainless-steel handle stays cool to the touch and comes riveted for strength.
  • Product 1: 4-quart saucepan made of 18/10 stainless steel with solid aluminum core.
  • Product 1: Rims are tapered for drip-free pouring.
  • Product 2: Updated cast-stainless-steel handle stays cool to the touch and comes riveted for strength.
  • Product 2: 1-1/2-quart saucepan made of 18/10 stainless steel with solid aluminum core.
  • Product 2: Secure-fitting stainless-steel lid helps trap heat, moisture, and nutrients.
Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

  • ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
  • ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
  • ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
  • ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
  • ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check Stock

Yanyu 2 Pcs 2\ x 2\ Boat Hinge Heavy Duty Flush Mount Hatch Hinge Cabinet Butt Strap Hinges Marine Stainless Steel 316 with Screws

  • Heavy duty stainless steel hinges for boat deck flush hatch cabinet..
  • Boat Door Hinge L x W :2" x 2" (50 x 50 mm). Thickness:Approx.0.2 inch (5 mm) Door Hinge.(Please see the left picture for specific size)..
  • Stainless steel 316 silica sol precision casting, resistant to seawater corrosion .Mirror polished Stainless Steel Door Hinges are built to last and will stand up to the elements..
  • Boat hinge uses 4.8 x 19mm screws, can be flush mounted, easy to install,Mounting for home/marine boat/yacht door or window, locker, cabinet, deck, tool box and so on..
  • Package Includes:2 pieces of 2" x 2" Strap Hinge Door Hinge (stainless steel 316) ,8 pieces 4.8 x 19 mm screws (stainless steel 316)..
Check Stock

Franklin Sports Horseshoes Sets - Includes 4 Horseshoes and 2 Stakes - Official Weight Horseshoes and Stakes - All Weather Durable Sets - Professional

  • Heavy-Duty Horseshoes and Stakes. The metal construction for maximum toughness and long-last durability. Different with traditional steel, this forged steel has better withstanding hits and strikes..
  • Horseshoe Medium weight 2.1 lbs, steel stakes are 20” long and ¾” wide, weight 1.8lbs. The shoes and stakes are in line with professional size and weight that with a well-balance and temper..
  • Bonus in 1 durable nylon bag with reinforced pockets for horseshoes and stakes storage for easy transport and storage in the car, truck, van, or even while walking..
  • Pack with (2) silver steel shoes, (2) golden steel shoes and (2) 20” steel stakes in (1) durable nylon bag, rules and instructions..
  • TRADITIONAL HORSESHOE SET Enjoy the classic backyard toss game with family and friends while you camp, tailgate, or bbq.
  • Pair with games like bocce ball and corn whole for 3X the backyard or beach fun..
Check Stock