Reviews3 5 Inch Hdd Mounting Bracket

Mediasonic SSD Mounting Bracket for 2.5-inch to 3.5-inch Hard Disk Drive HDB-G1

  • Converts an available 3.5-inch hard drive bay to accomodate ONE 2.5-inch HDD or SSD.
  • This bracket is also designed as a 2.5-inch HDD / SSD bracket adapter for Mediasonic external hard drive enclosure..
  • Compatible Model: HF2 Series, HFR2 Series, HF7 Series, HFR7 Series, H82 Series, H8R2 Series, HUR3 Series.
Check Stock

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

ORICO 5 Bay External Hard Drive Enclosure Magnetic Aluminum Type-C to SATA for 3.5inch HDD Tool Free Storage Case for Enterprise Data Backup and Expansion Up to 80TB(5X16TB) - NS500U3

  • LARGE CAPACITY -- Every single disk of the 3.5 usb c enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • Tool-Free Installation -- The construction of the 5 bay drive enclosure is magnetics design with 8 magntic chips on the cover, you can just spend 3 seconds to complete drive installation and prolong the service life of the cover, easy your working way and save your time..
  • DUAL CHIP CONTROL -- The 5 bay hdd enclosure adopts high-end chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- The 92mm cooling fans built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
Check Stock

1000LED 180 Degree Triple Bullhorn Mounting Bracket for 3 Lights 2.7 Inch Round Pole LED Shoebox Street Light Flood Light Mounting Accessories.

  • Triple Bullhorn Mounting Bracket for 3 inch round pole, bullhorn led mounting bracket accesaries.
  • Bullhorn lighting mounting bracket for 3 lights of 2-3/8 slip fitter mounting light.
  • Bracket is easy to install, hardware screws is including in package..
  • Led lighting bullhorn mounting bracket for led flood light, shoebox parking lot light, street light.
  • Demension: For inside diameter 2.7 inch round pole, outside diameter 3 inch round pole, 2-3/8 inch slip fitter led lights.
Check Stock

Dual SSD/HDD Metal Mounting Bracket kit 2.5 to 3.5, Convert Any 2.5 inch Solid State Drive/HDD Into One 3.5 inch Drive Bay

  • APPLICATION: For use in 2.5" to 3.5" mounting bracket kit, compatible with all types of 2.5 inch hard drives (HDD/SSD) and fits all popular PC casings.
  • ENLARGE SPACE: can convert 2 x 2.5 inch hard drive to a 3.5-inch drive bay via this holder, quickly maximize and expand space within your computer case.
  • A GIFT FOR YOU: 1 x screwdriver, 18 x screws, 1x 4 pin to dual 15 pin SATA power cable, 1x 15 pin to dual 15 pin SATA power cable, 2 x SATA data cables as warm gifts for you.
  • Downwards compatible with SATA I . II & III.
  • Achieved fast and interference-free data and power transmissions.
  • EASY INSTALLATION: Accurate mounting holes applied, easy, hassle-free and clean installation, saving your time.
Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

  • ... LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
  • 12 MONTH QUALITY ASSURANCE WITH LIFETIME TECHNICAL SUPPORT - All ORICO products purchased through Amazon include an 12-month quality assurance and lifetime technical support. If for any reason, you are dissatisfied with the product, just....
Check Stock

(4-Pack) Wheelbarrow Axle Bracket Set - 3.27-Inch Wide by 2.17-Inch Long Wheelbarrow Bracket - Complete Set Includes Bolts and Nuts - Compatible with 5/8 Inch Wheelbarrow Axles

  • 3.27-INCH WIDE BY 2.17-INCH LONG WHEELBARROW BRACKET - Exact dimensions are 3.27 inches from end to end of the mounting tabs, while the mounting holes are 2 1/8 inches apart from center to center.
  • COMPATIBLE WITH 5/8 INCH WHEELBARROW AXLES - These black wheelbarrow axle brackets are a universal fit for wheelbarrows with axles that are 5/8 inch in diameter. This is one of the most common axle sizes for wheelbarrows.
  • ONLY COMPATIBLE WITH SINGLE TIRE WHEELBARROWS - Part of the brackets’ design are the indentations on one end of the barrel. These indentations prevent the axle from sliding all the way through the bracket.
  • COMPLETE SET WHEELBARROW AXLE BRACKET - The 4-pack wheelbarrow axle bracket includes a complete set of the required bolts: length 29.62mm/1.17 inches and nuts. As this is a universal fit kit, the mounting holes may not align exactly with the existing holes on the wheelbarrow.
  • AFFORDABLE WHEELBARROW SPARE PARTS - Don’t just throw away your wheelbarrow just because of a simple defect. These 2 pairs of wheelbarrow axle brackets will ensure that you’ll always have a spare axle bracket on hand.
Check Stock

CELESTION V-Type Guitar Speaker (T5906)

  • L-type horizontal mounting bracket, you can install single-tube preamp, two tubes Preamp, three tubes Preamp..
  • The surface of the bracket is spray-painted in silver gray for a more beautiful appearance..
  • The opening diameter of the 3 tube sockets is 19mm, The distance between the sockets is increased in order to facilitate the installation of some larger enthusiast RC components..
  • Frame size: 150x60x25mm / 5.9x2.36x0.98 inch..
  • Package Includes: 1pc Large L-type Mounting Bracket, 2pcs Small L-type Bracket, 3pcs Silver Plated Small 9-pin Tube Sockets, 16sets 3*8mm Mounting Screws (Not contain tubes and other parts)..
Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black & be Quiet! Dark Rock Pro 4, BK022, 250W TDP, CPU Cooler

  • Product 1: Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Product 1: Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • Product 1: Cooling: Extreme cooling capacity.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Product 1: Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
  • Product 2: Socket compatibility AMD: AM5 / AM4.
Check Stock

JunSun Recessed Toilet Paper Holder Brushed Nickel Stainless Steel Toilet Paper Roll Holder Tissue Holder Modern Tissue Roll Holder 6 X 6 Square Jumbo Mega Roll Holder Rear Mounting Bracket Included

  • 100% STAINLESS STEEL CONSTRUCTION-Compared with other similar products which is constructed of zinc and aluminum with plastic brackets &bar, our product is 100% 304 stainless steel, including the main body, brackets and bar, even the rear mounting bracket. Stainless steel construction provides long-lasting durability, also it can protect against corrosion & rust..
  • BRUSHED NICKEL FINISH-Hand brushed nickel finish, including the main body, brackets and bar, even the rear mounting bracket. Ensuring every detail of the product is perfect, building to resist daily scratches, corrosion and tarnishing..
  • MULTI-USE - It can be mounted to a hollow wooden wall or wooden bathroom cabinet (hardware & rear mounting bracket included), also can be mounted to a solid cement wall (hardware included)..
  • EASY INSTALLATION - Complete with all the mounting accessories needed, including premium stainless steel screws, top quality anchors and rear mounting bracket..
  • DIMENSIONS- 6.1" x 6.1" x 3.58" inches, requires a 5-inch by 5-inch hole in the wall..
Check Stock

SSD HDD Holder 2.5 to 3.5 Mounting Bracket Hard Drive Adapter 2 Pack Black

  • Support 2.5" HDD/SSD Mounting Adapter Bracket.
  • M3 + #6-32*6 screws included for mounting the bracking onto the PC case.
  • Fits in desktop PC case with standard 3.5" internal drive bay (all popular PC casings).
  • The best electing for DIY. 30 days product Replacement or Full Refund if you are not satisfied.
Check Stock