Reviews3 5 Mono Pin

TISINO XLR to RCA Y-Cable, XLR Female to Dual RCA Adapter Y-Splitter Duplicator Lead Unbalanced Stereo Audio Interconnect Cable -10 feet/3 Meters

  • XLR Female to Dual RCA/Phono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the RCA inputs on a separate device, it splits a mono XLR signal into two separate mono RCA lines. (Note: Not left and right channels).
  • Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR PINs 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. This is an adapter to let you use an XLR mic/ component on your RCA circuit..
  • High-quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion-resistant, 20 AWG 4N oxygen-free copper wire combined with double shielding for best audio quality, excellent signal quality..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response..
  • The XLR connector is a high-quality metal shielded type with positive locking into the microphone.
  • It splits closer to the RCA ends, the distance to the split point is about 20 inches/ 50cm..
Check Stock

Luigis Modular Bucatini Braided Eurorack Patch Cables - Package of 5 Gray Cables, 12" (30 cm)

  • Package of 5 Gray 12" (30 cm) Patch Cables.
  • Cable is 26 AWG Copper Wire + Spiral Shielding with 5 mm Diameter Nylon Wrapped PVC Casing..
  • Connector A 3.5 mm Mono Male Plug, Connector B 3.5 mm Mono Male Plug.
  • Easy-To-Grab TS Male Plugs for Easier and Quicker Patching.
  • Bucatini Eurorack patch cables are thicker and stronger synth patch cables that will hold up to more wear and tear.
Check Stock

Lush 2 Charging Cable - USB DC 2.5mm Charger Cord Black (2-Pack)

  • USB to DC 2.5mm pin, 16mm tip mono fast charging cable.
  • USB plug work with power bank, wall charger, ac adapter, car charger, Laptop or PC.
  • Come with 2pcs to instead of your original power cord and for your backup.
Check Stock

DISINO XLR to 3.5mm (1/8 inch) Stereo Microphone Cable for Camcorders, DSLR Cameras, Computer Recording Device and More - 1.6ft/50cm

  • 1.6 FT Unbalanced 3-PIN XLR Female to 3.5mm TRS Stereo Cable, It's ideal for connecting an MONO XLR microphone to the 3.5mm mini input of a digital camcorder, DSLR camera, or computer sound card.(Note: If you plan to use a condenser microphone, please be sure that your camcorder provides phantom power or that your microphone has a built-in battery power supply).
  • It's designed to feed the mono mic equally to both input channels on the camcorder, Please check that you're plugging it into the mic input jack on your device and not the speaker output jack. If you only have one, it's a combo and this plug probably won't work at all. you should have a USB microphone for that kind of usage..
  • This won't work on an iPhone or Android phone which has TRRS 4 Pole port. You need a phone-3.5mm mic adapter(TRRS to TRS adapter), then this cable plugs into that one..
  • High strength aluminum alloy die-cast housing, Nickel-plated connections, 4N Oxygen-free copper(OFC) core to deliver pristine sound. Foil twisted pair shielding line for effective EMI and RFI rejection..
  • Polyethylene insulation Cotton Yarn wrap features improves high frequency response..
Check Stock

ANYCUBIC Photon Mono 4K 3D Printer, 6.23'' Monochrome Screen Upgraded LCD SLA UV Resin 3D Printers with Fast & Precise Printing and Large Printing Size 5.20''X3.14''X6.50''

  • [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer..
  • [4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface.
  • and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat..
  • [6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities..
  • [Adjustable Power & Universal Compatibility]: With 30%-100% l....
Check Stock

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit.
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones.
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B..
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable.
Check Stock

Luigis Modular Supply Spaghetti Eurorack Patch Cables - Package of 5 Red Cables, 6 (15 cm)

  • Package of 5 Red 6" (15 cm) Patch Cables.
  • Connector A 3.5 mm Mono Male Plug, Connector B 3.5 mm Mono Male Plug.
  • Cable is 26 AWG Copper Wire + Shield with 4 mm Diameter PVC Casing..
  • Easy-To-Grab TS Male Plugs for Easier and Quicker Patching.
Check Stock

Dell 1201MP DLP projector - SVGA 2000 ANSI lumens

  • Video Modes 720p, 1080i, 576i, 576p, 480p, 480i.
  • Lamp Life 2,500 hours / 3,000 hours (Eco).
  • Projector Size 3.96" x 9.90" x 8.40" (HxWxD).
  • Connection Panel: RS232: DB-9pin, USB,Composite Video, S-Video, VGA/SVGA D-Sub, Wired.
  • Features: Ceiling Projection, Color Correction, HD Ready, Portable, Projection Tilt, Rear Projection.
Check Stock

ANYCUBIC Photon Mono X 6K Resin 3D Printer Large LCD Resin 3D Printer with 9.25 6K HD Monochrome Screen Dual Z-axis Linear Rail Print Size 7.8 x 4.8 x 9.6

  • 9.25'' Larger LCD Screen ANYCUBIC Photon mono X 6k 3d printer is equipped with a 9.25inch monochrome screen, which is 138% larger than a normal 6-inch....
  • Achieve Larger Print Volume The ANYCUBIC Photon Mono X 6K Resin 3d printer can print up to 9.6 x 7.8 x 4.8 inches (HWD). The large volume can print....
  • High Precision & High Resolution The Photon Mono X 6K LCD screen has a high resolution of 5,760 x 3,600 px and a contrast ratio of over 350, which can....
  • Ultra-Fast Printing The max printing speed of ANYCUBIC Photon Mono X 6K 3d printer is 3.15 in/h. With a 6% light transmittance screen, the fastest....
  • Compatible Resin & Power Adjustment The UV lamp power adjustment range is 30%-100%, which can support the use of more types of resin printing....
Check Stock

Luigis Modular Supply Spaghetti Eurorack Patch Cables - Package of 5 White Cables, 36 (90 cm)

  • Package of 5 White 36" (90 cm) Patch Cables.
  • Connector A 3.5 mm Mono Male Plug, Connector B 3.5 mm Mono Male Plug.
  • Cable is 26 AWG Copper Wire + Shield with 4 mm Diameter PVC Casing..
  • PVC casing that feels great in the hand and which drapes nicely in a patch.
Check Stock

Hosa CMP-305 3.5 mm TS to 1/4" TS Mono Interconnect Cable, 5 feet

  • Left Connector(s): 1 x phone mono 6.3 mm - male.
  • Right Connector(s): 1 x mini-phone mono 3.5 mm - male.
Check Stock